Abstract
This paper presents the results of investigating an Al-Fin bond between an aluminum piston alloy and austenitic cast iron. The part investigated utilized an austenitic cast iron insert for the first ring groove for application in a highly loaded diesel engine for increased wear resistance. A metallographic investigation using an optical microscope in combination with SEM/EDS (Scanning Electron Microscopy/Energy Dispersive Spectroscopy) analysis and 3D visualization of the quality of the intermetallic bonding layer was performed. The test results show that a metallic bond can be formed between the aluminum piston alloy and the austenitic cast iron.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Manasijevic, S., Radisa, R., Maikovic, S., Acimovic-Pavlovk, Z., Raic K., “Thermal Analysis and Microscopic Characterizaiion of the Piston Alloy AlSi 13Cu4Ni2Mg,ℍ Intermetallics, vol. 19, pp. 486–492 (2011).
Manasijevic, S., Radisa. R., Markovic, S., Raic, K., Acimovic-Pavlovic Z., “Implementation of Infrared Thermography for Thermo-Mechanical Analysis of an AlSi Cast Piston,ℍ Practical Metallography, vol. 46, pp. 565–579 (2009).
Belov, N., Eskin, D., Avxenieva N., “Constituent Phase Diagrams of the Al-Cu-Fe-Mg-Ni-Si System and Their Application to the Analysis of Aluminum Piston Alloys,ℍ Acta Materialia, vol. 58, pp. 4709–4722 (2005).
Manasijevic, S., Aluminum Piston Alloys, Published by the LOLA Institute Belgrade (2012).
U.S. Patent Number 6,127,046 (Oct. 3, 2000).
U.S. Patent Number 6,112,802 (Sep. 5, 2000).
Viala, J.C, Peronnet, M., Barbeau, F., Bosselet, F., Bouix, J., “Interface Chemistry in Aluminium Alloy Castings Reinforced with Iron Base Inserts,ℍ Composites: Part A, vol. 33, pp. 1417–1420 (2002).
Uthayakumor, M., Parabhahoran, G., Aravinddan S., Sivaprasad, J. V., “Machining of Bimetallic Piston,ℍ Proceedings of International Conference, ICMAT-2007, Banerjee, A.J., Chowdhury, A.K., Sinha, G.P. (eds.). Allied Publishers Pvt Ltd., New Delhi, India, pp. 119–124 (2007).
Acar, A.F., Ozturk, F., Bayrak, M., “Effects of Variations in Alloy Content and Machining Parameters on the Strength of the Intcrmetallic Bonding Between a Diesel Piston and a Ring Carrier,ℍ Materials and Technology, vol. 44, pp. 391–395 (2010).
Engine Australia Ply Ltd: Alfin (Ni-Resist) Ring groove inserts. Service Engineering Bulletin (2012).
Wilcox, M., “Ultrasonic Inspection Equipment for Al-Fin Insert Diesel Pistons,ℍ Insight NDT Equ ipment Ltd., The Old Cider Mill, Kings Thorn, Herefordshire HR2 8AW (2000).
Kattner, U.R., Binary Alloy Phase Diagrams, T.B. Massolski (ed.), ASM International, Materials Park, OH, pp. 147 (1990).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Manasijević, S., Radiša, R., Brodarac, Z.Z. et al. Al-Fin Bond in Aluminum Piston Alloy & Austenitic Cast Iron Insert. Inter Metalcast 9, 27–32 (2015). https://doi.org/10.1007/BF03356037
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03356037