Abstract
Thermoplastic polyolefin (TPO) is widely used in automotive interior applications including instrument panel, doors, and centre console. Ultrasonic welding and vibration welding are two common joining techniques used in the industry. The goal of this study was to use design of experiments (DOE) to evaluate the ultrasonic welding and vibration welding of a TPO. This study included ultrasonic energy director welding using American Welding Society (AWS) standard test samples and vibration welding of two AWS Tee samples in butt joint geometry. The weld strength was compared to bulk material tensile strength of moulded AWS I-beams. Ultrasonic welding results indicated that amplitude was the most dominant factor in affecting the welding strength and both time and weld pressure had minimum impact on weld strength. The maximum achievable weld strength using ultrasonic welding was 40% of the base material strength. Vibration welding results indicated that amplitude was the most dominant factor in affecting the weld strength and high weld pressure resulted in lower weld strength. The maximum achievable weld strength using vibration welding was 66% of the base material strength.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kakarala N. and Shah S.: SPE Automotive TPO Global Conference 2000, 2000, p. 147-158.
Ford J.D.: SPE Automotive TPO Global Conference 2000, 2000, p. 173-183.
Grewell D.A., Benatar A., and Park J.B. (Editors): Plastics and Composites Welding Handbook, Hanser, 2003.
Wu C.Y., Mokhtarzadeh A., Rhew M.Y. and Benatar A.: Heated tool welding of thermoplastic polyolefins (TPO), SPE, ANTEC 61th Annual Technical Conference, 2003.
Wu C.Y. and Trevino L.: Vibration welding of TPO, SPE, ANTEC 60th Annual Technical Conference, 2002.
Park J. and Liddy J.: Effect of paint over spray for vibration and ultrasonic welding processes, SPE, ANTEC 62nd Annual Technical Conference, 2004.
Chen Y.S. and Benatar A.: Infrared welding of polypropylene, SPE, ANTEC 53rd Annual Technical Conference, 1995.
Wu C.Y., Cherdron M. and Douglass D.M.: Laser welding of polypropylene to thermoplastic polyolefins, SPE, ANTEC 61th Annual Technical Conference, 2003.
AWS G1.2M/G1.2:1999, Specification for standardized ultrasonic welding test specimen for thermoplastics, American Welding Society, 1999.
Stokes V.K.: Vibration welding of thermoplastics. Part I: Phenomenology of the welding process, Polymer Engineering and Science, 1988, vol. 28, no. 11, pp. 718–727.
Benatar A., Eswaran R.V. and Nayar S.K.: Ultrasonic welding of thermoplastics in the near-field, Polymer Engineering and Science, 1989, vol. 29, no. 23, pp. 1689–1698.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wu, CY., Benatar, A. & Mokhtarzadeh, A. Comparison of Ultrasonic Welding and Vibration Welding of Thermoplastic Polyolefin. Weld World 56, 69–75 (2012). https://doi.org/10.1007/BF03321148
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03321148