Abstract
Arc welding fume may pose a serious risk to the health and safety of welders and operators in the welding industry. Many methods have been employed to collect and characterize welding fume in the past but previous studies have often not used a combination of techniques that give the full picture on the nature of welding fume. This study was employed to collect fume generated by a variety of arc welding processes, including shielded metal arc welding (SMAW: E6010, E7018, E308–16) and gas metal arc welding (GMAW: ER70S-6 with 100% CO2 and 75% Ar-25% CO2 shielding gases), and to characterize the fume by size distribution, chemical composition, structure, and morphology with state-of-the-art techniques. This requires the use of multiple imaging and analysis techniques since the size variation of welding fume particles is quite large. Collection of welding fume generated by a variety of common electrodes was performed with an electrical low-pressure cascade impactor (ELPI) to size particles by their aerodynamic diameters and develop particle size distributions. A fume collection hood was also used to collect bulk fume samples and measure fume generation rates. Fume particles on the impactor stages were imaged using high resolution scanning electron microscopy (HR-SEM) and high resolution transmission electron microscopy (HR-TEM), revealing the presence of three fume particle morphologies including spherical, agglomerated, and irregular. TEM revealed the presence of a core-shell particle structure. Chemical analysis and phase identification was also performed for individual particles and bulk stages with energy dispersive X-ray spectroscopy (SEM-XEDS and TEM-XEDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Bulk fume and individual particles analyzed were largely metal-oxides with a Fe3O4-type crystal structure. Using these advanced characterization techniques in conjunction with one another provides an overall picture of fume that has been previously unattainable.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Welding Handbook, Vol. 18th Edition, American Welding Society, 1987, Miami, FL.
Castner H.R., Null C.L.: Chromium, nickel and manganese in shipyard welding fumes, Welding Journal, 1998, 77, 6, pp. 223–S–231–S.
Zimmer A.T.: The influence of metallurgy on the formation of welding aerosols, J. Environ. Monit, 2002, 4, pp. 628–632.
Jenkins N.T.: Chemistry of airborne particles from metallurgical processing, Ph.D. Dissertation: Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 2003.
Jenkins N.T., Eager T.W.: Chemical analysis of welding fume particles, Welding Journal, 2005, 84, 6, pp. 87–s–93–s.
Environmental Protection Agency, Basic concepts in environmental sciences, 2005. http://www.epa.gov/eogapti1/home/index.htm.
Antonini J.M., Krishna Murthy G.G., Rogers R.A., Albert R., Eager T.W., Ulrich G.D., Brian J.D.: How welding fumes affect the welder, Welding Journal, 77, 10, pp. 55–99.
Friedlander S.K.: Smoke, dust, and haze: Fundamentals of aerosol behavior, New York, New York, John Wiley & Sons, 1977.
Voitkevic V.: Welding fumes: Formation, properties, and biological effects, Cambridge, England, Abington Publishing, 1995.
Reist, Parker C.: Introduction to aerosol science, New York, New York: Macmillan Publishing Company, 1984.
Newbury D.E., Joy D.C., Echlin P., Fiori C.E., Goldstein J.I. Eds., Advanced Scanning Electron Microscopy and X-ray Microanalysis, New York, New York: Plenum Press, 1986.
Spurny K.R.: Analytical chemistry of aerosols, Boca Raton, Fl.: Lewis Publishers, ed. 1999.
Characterization of Arc Welding Fume, American Welding Society, 1983, Miami, FL.
Ehrman S.H., Friedlander S.K., Zachariah M.R.: Phase segregation in binary SiO2/TiO2 and SiO2/Fe2O3 nanoparticle aerosols formed in a premixed flame, Journal of Materials Research, 1999, 14, 12, pp. 4551–4561.
Tandon R.K., Payling R., Chenhall B.E., Crisp P.T., Ellis J., Baker R.S.: Application of X-ray photoelectron spectroscopy to the analysis of stainless-steel welding aerosols, Applications of Surface Science, 1985, 20, 4, pp. 527–537.
Smith G.C.: Surface analysis by electron spectroscopy, New York, New York: Plenum Press, 1994.
Laboratory method for measuring fume generation rates and total fume emission of welding and allied processes, American Welding Society, 1999, Miami, FL.
ELPI Users Manual, Dekati Ltd, Tampere, Finland.
Sferlazza S.J., Beckett W.S.: The respiratory health of welders, Am Rev Respir Dis, 1991, Vol. 143, pp. 1134–1148.
Jenkins N.T., Pierce W.M.-G., Eagar T.W.: Particle size distribution of gas metal and flux cored arc welding fumes, Welding Journal, 2005, 84, 10, pp. 156–s–163–s.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sowards, J.W. Henry Granjon Prize Competition 2006 Winner, Category D “Human related subjects” Method for Sampling and Characterizing Arc Welding Fume Particles. Weld World 50, 40–54 (2006). https://doi.org/10.1007/BF03263444
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03263444
IIW-Thesaurus keywords
- Sampling
- Fume analysis
- Analysis techniques
- Chemical analysis
- Fume
- Health and safety
- Occupational health
- Toxic materials
- Size
- Dimensions
- Particles
- Shape
- Composition
- Measurement
- Practical investigations
- Electron microscopes
- Measuring instruments
- Microscopes
- FCA welding
- Arc welding
- GMA welding
- Gas shielded arc welding
- MMA welding
- Reference lists