Abstract
The present paper investigated the effect of ultrasonic vibrations on the melting process of a phase-change material (PCM). Furthermore, the present study considered constant heat flux boundary conditions unlike many of the previous researches adopted constant wail temperature conditions. Therefore, in the present study, modified dimensionless parameters such as Ste* and Ra* were used. Also, general relationships between melting with ultrasonic vibrations and melting without ultrasonic vibrations were established during the melting of PCM. Experimental observations show that the effect of ultrasonic vibrations on heat transfer is very important throughout the melting process. The results of the present study reveal that ultrasonic vibrations accompany the effects like agitation, acoustic streaming, cavitation, and oscillating fluid motion. Such effects are a prime mechanism in the overall melting process when ultrasonic vibrations are applied. They enhance the melting process as much as 2.5 times, compared with the result of natural melting. Also, energy can be saved by applying ultrasonic vibrations to the natural melting. In addition, various time-wise dimensionless numbers provide conclusive evidence of the important role of ultrasonic vibrations on the melting phenomena.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Abbreviations
- h:
-
Heat transfer coefficient
- Δht :
-
Latent of fusion
- g:
-
Gravitational acceleration
- t:
-
Time Heat flux
- q″:
-
Heat flux
- CP :
-
Specific heat of liquid phase
- H:
-
Height of solid paraffin (Characteristic Height)
- K:
-
Thermal conductivity of liquid phase
- T:
-
Temperature
- Fo :
-
Fourier number
- Nu:
-
Nusselt number
- Pr:
-
Prandtl number
- Ra:
-
Rayleigh number
- Ra* :
-
Modified Rayleigh number
- Ste:
-
Stefan number
- Ste* :
-
Modified Stefan number
- a :
-
Thermal diffusivity of liquid phase
- β:
-
Thermal expansion coefficient
- ϑ:
-
Dimensionless Temperature
- ν:
-
Kinematic viscosity
- f:
-
Fusion
- h:
-
Heater surface
- i:
-
Solid-liquid interface
- l:
-
Liquid
- s:
-
Solid
References
Affel, C. E. and Willert, K. J., 1998, “Particle Image Velocitmerty,” A Particle Guide, Springer.
Barnett, S. B., 1998, Ultrasound Med. Biol. 2, supp 1. pp. 28–29.
Chan, S. H., Cho, D. H. and Kocamustafaogullari G., 1983, “Melting and Solidification with Internal Radiative Transfer,”Int. J. Heat Mass Transfer, Vol. 26, No 4, pp. 621–630.
Cho, S. H. and Sunderland, J. E., 1969, “Heat conduction Problems with Melting or Freezing,”Journal of Heat Transfer, pp. 125–131.
Folger, S. and Loud, K., 1973,J. Acous. Soc. Am. 53, pp. 59.
Fsairbanks, H. V., 1979, “Influence of Ultrasound upon Heat Transfer Systems,”Ultrasonics Symposium, pp. 384–389.
Gadgil, A. and Gobin D., 1984, “Analysis of Two-Dimensional Melting in Rectangular Enclosures in Presence of Convection,”Transaction of the ASME, Vol. 106, pp. 20–26.
Gau, C. and Viskanta, R., 1986, “Melting and Solidification of a Pure Metal on a Vertical Wail,”J. of Heat Transfer, Vol. 108, pp. 204–209.
Ha, M. Y., 1992, “A Theoretical Study on the Acoustically Driven Oscillating Flow around Small Spherical Particales,”KSME Int. Journal, Vol 6, No. 1, pp. 49–57.
Ho, C. J. and Viskanta, R., 1986, “Heat-Transfer During Melting from the Isothermal Vertical Wall,”J. of Heat Transfer, Vol. 108, pp. 204–209.
Hong, J. S., 1988, “Experimental Study of Melting Phenomena with and without ultrasonic vibrations,” M. S. Thesis, Univ. of Illinois at Chicago.
Hong, C. S., 1990, “Studies on Heat Storing and Retrieving Characteristics in a Paraffin-Filled Horizontal Circular Tube,” Ph. D. Thesis, Seoul National University.
Larson, M. B. and London, A. L., 1962, “A Study of the Effect of Ultimate Vibrations on Convective Heat Transfer to Liquids,”ASME, 62-HT-44, pp. 62–68.
Lee, J. H., and Um, C. J., 1999, “An Experimental Study on the Ultrasonic Influence for Melting the Paraffin with Solid particles,”SACREK, pp. 285–290.
Lemlich, R., 1955, “Effect of Vibration on Natural Convective Heat Transfer,”Industrial and Engineering Chemistry, Vol. 47, No. 6, pp. 121–127.
Okada, M., 1984, “Analysis of heat transfer during melting from a vertical wall,”Int. J. Heat Mass Transfer, Vol 27, No. 11, pp. 2057–2066.
Sparrow, E. M., Patankar, S. V. and Ramadhyani, S., 1977, “Analysis of Melting in the Presence of Natural Convection in the Melt Region,”ASME Journal of Heat Transfer, Vol. 99, No. 4, pp. 520–526.
Takaaki India, Xu Zhang and Akira Yabe, 2001, “Active Control of Phase Change from Supercooled Water to Ice by Ultrasonic Vibration 1,”Int. J. Heat and Mass Transfer 44, pp. 4523–4531.
Topp, M. N. and Eisenklam, P., 1972, “Industrial and Medical Uses of Ultrasonic Atomizers,”Ultrasonics, pp. 127–132.
West, F. B. and Taylor, A. T., 1952, “The Effect of Pulsations on Heat Transfer,”Chem. Eng. Progress., Vol. 48, No. 1, pp. 208–214.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Oh, YK., Park, SH. & Cha, KO. An experimental study of accelerating phase change heat transfer. KSME International Journal 15, 1882–1891 (2001). https://doi.org/10.1007/BF03185148
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF03185148