Abstract
Factors that determine the difference between low-frequency and ultrasonic treatments methods are discussed: cavitation phenomena, dissipative losses, and the possibility for the turbulent mixing of the melts. The independence of each method is proven.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Agranat, B.A., Kirillov, O.D., Preobrazhenskii, N.A., et al., Ul’trazvuk v metallurgii (Ultrasound in Metallurgy), Moscow: Metallurgiya, 1969.
Ignat’ev, I.V., Kiselev, A.V., Dolmatov, A.V., et al., Rasplavy, 2005, no. 6, p. 3.
Ignat’ev, I.E., Kontsevoi, Yu.V., Ignat’eva, E.V., and Pastukhov, E.A., Raplavy, 2007, no. 2, p. 19.
Ignat’ev, I.E., Kontsevoi, Yu.V, Ignat’eva, E.V., and Pastukhov, E.A., Rasplavy, 2007, no. 6, p. 3.
Ignat’ev, I.E., Dolmatov, A.V., Ignat’eva, E.V., et al., Rasplavy, 2011, no. 3, p. 3.
Kochin, N.E., Kibel’, I.A., and Roze, N.V., Teoreticheskaya gidromekhanika. T. 1 (Theoretical Hydromechanics. Vol. 1), Leningrad-Moscow: OGIZ (Ob’ed. Gos. Knizh.-Zhurn. Izd.)-Gosgortekhizdat, 1948.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.E. Ignat’ev, E.A. Pastukhov, E.V. Ignat’eva, 2014, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2014, No. 5, pp. 7–11.
About this article
Cite this article
Ignat’ev, I.E., Pastukhov, E.A. & Ignat’eva, E.V. Principal distinction of the methods of low-frequency and ultrasonic effects on melts. Russ. J. Non-ferrous Metals 55, 509–512 (2014). https://doi.org/10.3103/S1067821214060091
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821214060091