Abstract
Values of the Taylor factorM and the corresponding lattice rotations for tension or compression have been computed for grains of various orientations postulated to slip on arbitrary planes in 〈111〉 directions. The stresses in each grain were first obtained by numerically maximizing the work expression subject to the constraints of the pencil-glide yield expressions. The derived value of Mave = 2.733 is slightly lower than in the case of mixed {110}, {112}, and {l23} 〈111〉 slip and the computed rotations are in reasonable agreement with experiments on iron. In compression, 26 pct of the grains are predicted to rotate toward 〈100〉, although the 〈111〉 texture component develops faster. The computational method used can easily be applied to the determination of the mechanics of texture generation for arbitrary deformations.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
W. F. Hosford, Jr. and W. A. Backofen:Fundamentals of Deformation Processing, W. A. Backofenet al, eds., pp. 259–98, Syracuse University Press, N. Y., 1964.
G. Y. Chin and W. L. Mammel:Trans. TMS-AIME, 1967, vol. 239, pp. 1400–05.
G. Y. Chin, W. L. Mammel, and M. T. Dolan:Trans. TMS-AIME, 1967, vol. 239, pp. 1854–55.
G. Y. Chin, W. L. Mammel, and M. T. Dolan:Trans. TMS-AIME, 1969, vol. 245, pp. 383–88.
G. I. Taylor and C. F. Elam:Proc. Roy. Soc, 1926, vol. A112, pp. 337–61 ; G.I. Taylor: in Proc. Colloq. Deformation and Flow of Solids, Madrid, 1955, pp. 3–12, Springer-Verlag, Berlin, 1956.
J. F. W. Bishop and R. Hill:Phil. Mag., 1951, vol. 42, pp. 414–27, 1298–1307 ; J. F. W. Bishop: Phil. Mag., 1953, vol. 44, pp. 51–64.
G.Y. Chin and W.L. Mammel:Trans. TMS-AIME, 1969, vol. 245, pp. 1211–14.
H. R. Piehler and W. A. Backofen:Met. Trans., 1970, vol. 1, pp. 249–55.
J. Weisman, C. F. Wood, and L. Rivlin:Chem. Eng. Progr. Symp. Ser., vol. 1965, 61, no. 55, pp. 50–63.
G. Mayer and W. A. Backofen:Trans. TMS-AIME, 1968, vol. 242, pp. 1587–94.
J. W. Hutchinson:J. Mech. Phys. Solids, 1964, vol. 12, pp. 25–33.
G. Y. Chin: inTextures in Research and Practice, G. Wassermann and J. Grewen, eds., pp. 51–80, Springer-Verlag, Berlin, 1969.
Author information
Authors and Affiliations
Additional information
Formerly a summer Undergraduate Research Scholar at Carnegie-Mellon University, Pittsburgh, Pa.
Rights and permissions
About this article
Cite this article
Rosenberg, J.M., Piehler, H.R. Calculation of the taylor factor and lattice rotations for bcc metals deforming by pencil glide. Metall Trans 2, 257–259 (1971). https://doi.org/10.1007/BF02662666
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02662666