Article PDF
Avoid common mistakes on your manuscript.
o
R. L. Cairns and J. A. Charles:J. Iron Steel Inst., 1967, vol. 205, p. 1044.
R. A. Grange:Proceedings of the Second International Conference on the Strength of Metals and Alloys, p. 861, ASM, Pacific Grove, 1970.
S. Hayami and T. Furukawa:Micro Alloying 75, Symposium on High Strength, Low-Alloy Steels, Products and Process, p. 78, Washington, D.C., 1975.
J. Y. Koo and G. Thomas:Mater. Sci. Eng., 1976, vol. 24, p. 187.
Carlo Parrini,et al.: Micro Alloying 75, Symposium on High Strength, Low-Alloy Steels, Products and Process, p. 56, Washington, D.C., 1975.
G. Thomas:Iron Steel International, 1973, vol. 46, pp. 451–61.
H. Fischmeister, J.-O. Hjälmered, B. Karlsson, G. Lindén and B. Sundstrom:The Microstructure and Design of Alloys Proc. 3rd Intl. Conf. on Strength of Metals and Alloys, p. 621, Inst. of Metals and Iron Steel Inst., London, 1973.
M. R. Plichta and H. I. Aaronson:Met. Trans, 1974, vol. 5, p. 2611.
A. Kelly and G. J. Davies:Met. Rev., 1965, vol. 10, p. 1.
A. Kelly:Strong Solids, 2nd ed., p. 157, Oxford University Press, 1973.
E. Piwowarsky:Hochwertiges Gusseisen, p. 52, Springer-Verlag, 1951.
J. Chipman:Metals Handbook, 8th ed., p. 276, ASM, 1973.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Koo, J.Y., Thomas, G. Design of duplex Fe/X/0.1C steels for improved mechanical properties. Metall Trans A 8, 525–528 (1977). https://doi.org/10.1007/BF02661770
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02661770