Article PDF
Avoid common mistakes on your manuscript.
References
H. I. Aaronson, T. L. Johnston, and D. J. Schmatz:Trans. ASM, 1968, vol. 61, p. 349.
J. M. Robertson:Carnegie Scholarship Memoirs, p. 48, Iron and Steel Inst., London, 1931.
M. Baeyertz:Trans. ASM, 1942, vol. 30, p. 458.
R. A. Huggins, H. Udin, and J. Wulff:Welding J., 1956, vol. 35, p. 185.
V. D. Sadovskii:Probl. Metallog. and Heat Treatment, 1956, p. 31.
A. E. Nehrenberg:Trans. AIME, 1950, vol. 188, p. 162.
V. D. Sadovskii and B. K. Soklov:Probl. Metallog. and Heat Treatment, 1960, p. 5.
A. E. Nehrenberg:Trans. AIME, 1952, vol. 194, p. 181.
B. K. Sokolov and V. D. Sadvoskii:Metal Sci. Heat Treat., May, 1959, p. 7.
B. A. Leont-yev and O. A. Lopatina:Phys. Met. Metallog., 1960, vol. 13, no. 6, p. 107.
V. D. Sadovskii:Trudy Instituta Fiziki Metallov, Akademiya Nauk SSSR, 1958, vol. 20, p. 303.
J. Rzepski, G. LeTourneau, and A. Van Neste:Metallography, 1972, vol. 5, p. 378.
B.W. Christ and L. C. Smith:J.I.S.I., 1973, vol. 211,p. 155.
M. R. Plichta, H. I. Aaronson, and W. F. Lange III: unpublished research, Michigan Technological University, 1973.
P. M. Kelly and J. Nutting:Proc. Roy. Soc, 1960, vol. A259, p. 45.
A. R. Marder and G. Krauss:Trans. ASM, 1967, vol. 60, p. 651.
E. P. Abrahamson II, B. S. Bakeney and Jr.:Trans. TMS-AIME, 1960, vol. 218, p. 1101.
G. R. Speich and W. C. Leslie:Met Trans., 1972, vol. 3, p. 1043.
H. I. Aaronson, H. A. Domian, and G. M. Pound:Trans. TMS-AIME, 1966, vol. 236, p. 768.
K. R. Kinsman and H. I. Aaronson:Transformation and Hardenability in Steels, p. 39, Climax Molybdenum Co., Ann Arbor, Mich., 1967.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Plichta, M.R., Aaronson, H.I. Influence of alloying elements upon the morphology of austenite formed from martensite in Fe-C-X alloys. Metall Trans 5, 2611–2613 (1974). https://doi.org/10.1007/BF02643888
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02643888