Abstract
Gas injection into liquid metals has been studied extensively with gas injection into water models. While the general features of such flows are appreciated, the structure of the two-phase region has not been well characterized. To improve our understanding of the fundamental transport phenomena in the two-phase region, a combined laser Doppler anemometry (LDA) and electrical probe (EP) technique has been developed to measure the time-averaged and fluctuating liquid velocities, bubble velocities, and void fraction. The primary findings are: (1) The slip velocity of the bubbles is close to the terminal rising velocity of bubbles in stagnant fluids. (2) The intensity of turbulence in the two-phase region is generally higher than 0.5, which is higher than in the single-phase region. (3) The turbulence is not isotropic; it is greater in the vertical direction. The implications for mathematical modeling and process analysis are discussed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M. Sano and K. Mori:Trans. Iron Steel Inst. Jpn., 1980, vol 20, pp. 668–73.
M. Sano and K. Mori:Trans. Iron Steel Inst. Jpn., 1980, vol 20, pp. 674–85.
M. Sano and K. Mori:SCANINJECT III, Mefos and Jernkontoret, Lulea, Sweden, 1983, pp. 6:1–17.
M. Kawakami, Y. Kitazawa, T. Nakamura, T. Miyaké, and K. Ito:Trans. Iron Steel Inst. Jpn., 1985, vol. 25, pp. 394–402.
A.H. Castillejos and J.K. Brimacombe:Metall. Trans. B, 1987, vol. 18B, pp. 649–58.
A.H. Castillejos and J.K. Brimacombe:Metall. Trans. B, 1987, vol. 18B, pp. 659–71.
D. Mazumdar and R.I.L. Guthrie:Metall. Trans. B, 1985, vol. 16B, pp. 83–90.
D. Mazumdar and R.I.L. Guthrie:Ironmaking and Steelmaking, 1985, vol. 12 (6), pp. 256–64.
J.H. Grevet, J. Szekely, and N. El-Kaddah:Int. J. Heat Mass Transfer, 1982, vol. 25 (4), pp. 487–97.
F. Oeters, H.C. Dromer, and J. Kepura:Mefos and Jernkontoret, SCANINJECT II, 1983, Lulea, Sweden, pp. 7:1–7:22.
P.E. Anagbo and J.K. Brimacombe:Metall. Trans. B, 1990, vol. 21B, pp. 637–48.
S.T. Johansen, D.G.C. Robertson, K. Woje, and T.A. Engh:Metall. Trans. B, 1988, vol. 19B, pp. 745–54.
Y.Y. Sheng and G.A. Irons:Int. J. Multiphase Flow, 1991, vol. 17 (5), pp. 585–98.
C. Tropea and D. Struthers:Proc. Conf. Use of Computers in Laser Velocimetry, Deutsche-Franzosisches Forschungs Institute, Saint-Louis, Senegal, May 18–20, 1987.
K.-H. Tacke, H.-G. Schubert, D.J. Weber, and K. Schwerdtfeger:Metall. Trans. B, 1985, vol. 16B, pp. 263–75.
M.A.S.C. Castello-Branco and K. Schwerdtfeger: Presented at the 26th Annual Conference of Metallurgists, Winnipeg, Canada, 1987, p. 30.
R. Clift, G.R. Grace, and M.E. Weber:Bubbles, Drops and Particles, Academic Press, New York, NY, 1978.
J. Szekely, H.J. Wang, and K.M. Kiser:Metall. Trans. B, 1976, vol. 7B, pp. 287–95.
T. DebRoy, A.K. Majumdar, and D.B. Spalding:Appl. Math. Modelling, 1978, vol. 2, pp. 146–50.
M. Salcudean, K.Y.M. Lai, and R.I.L. Guthrie:Can. J. Chem. Eng., 1985, vol. 63, pp. 51–61.
L.R. Farias and G.A. Irons:Metall. Trans. B, 1986, vol. 17B, pp. 77–85.
S.T. Johansen and F. Boysan:Metall. Trans. B, 1988, vol. 19B, pp. 755–64.
M. Ishii and N. Zuber:AIChE J., 1979, vol. 25 (5), pp. 843–55.
H. Tennekes and J.L. Lumley:A First Course in Turbulence, The MIT Press, Cambridge, MA, 1972.
J.Q. Hinze:Turbulence, 2nd ed., McGraw-Hill, New York, NY, 1975.
C.J. Lawn:J. Fluid Mech., 1971, vol. 48, Part 3, pp. 477–505.
I. Wygnanski and H. Fiedler:J. Fluid Mech., 1969, vol. 38, Part 3, pp. 577–612.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sheng, Y.Y., Irons, G.A. Measurements of the internal structure of gas-liquid plumes. Metall Trans B 23, 779–788 (1992). https://doi.org/10.1007/BF02656456
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02656456