Abstract
The chemistry and morphology of aluminide coatings formed on platinum and platinum-coated IN-738 have been studied. Most of the aluminide coatings evaluated were applied using the pack cementation process. For aluminized platinum a series of intermetallic Pt-Al compounds form. The stoichiometries of these compounds are essentially in agreement with those that would be predicted based upon phase diagram considerations. For aluminized, platinum-coated IN-738, the coating morphology and chemistry are highly dependent upon the thickness of the platinum layer. A relatively thick platinum layer (∼25 microns) confines the initial reaction for the aluminizing conditions used so that refractory metal elements from the substrate are excluded from the outer regions of the coating. Thinner platinum layers only partially confine the reaction and do not exclude the refractory metals from the coating. Microstructures that develop are related to the appropriate phase diagrams.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. M. Beltran and D. A. Shores:The Superalloys, C. T. Sims and W. C. Hagel, eds., pp. 317–39, John Wiley and Sons, New York, 1972.
S. J. Grisaffe:The Superalloys, C. T. Sims and W. C. Hagel, eds., pp. 341–70, John Wiley and Sons, New York, 1972.
G. Lehnert and H. W. Meinhardt:D.E.W. Tech. Ber., 1971, vol 11 pp 236–40.
G. Lehnert and H. W. Meinhardt:Electrodep., Surface Treat 1972–73 vol 1 pp. 71–76.
G. Lehnert and H. W. Meinhardt:Electrodep. Surface. Treat 1972–73 vol 1 pp. 189–97.
G. Lehnert and H. W. Meinhardt:Production of Protective Layers on Cobalt-based Alloys, U. K. Patent No. 1,282,530, 1970.
High-Temperature Oxidation-Resistant Coatings, ISBN-O-309-01769-6 NAC, NMAB, 1970.
N. R. Lindblad:Oxid. Met., 1969, vol. l, pp. 143–70.
G. W. Goward:J. Metals, 1970, vol. 22, no. 10, pp. 31–39.
J. R. Rairden and M. R. Jackson: General Electric Company, Schenectady, NY, unpublished research, 1974.
G. W. Goward, D. H. Boone, and C. S. Giggins:Trans. ASM, 1967, vol. 60, pp. 228–41.
M. M. P. Janssen and G. D. Rieck:Trans. TMS-AIME, 1967, vol. 239, pp. 1372–85.
F. A. Shunk:Constitution of Binary Alloys, Second Suppl., McGraw-Hill, New York, 1969.
M. Hansen:Constitution of Binary Alloys, McGraw-Hill, New York, 1958.
D. Chatterji, R. C. DeVries, and J. F. Fleischer:J. Less-Common Met., 1972, vol. 42, pp. 187–93.
N. S. Bornstein, M. A. DeCrescente, and H. A. Roth:Met. Trans., 1973, vol. 4, pp. 1799–1810.
K. R. Peters, D. P. Whittle, and J. Stringer:Corros. Sci., 1976, vol. 16, pp. 791–804.
J. W. Schultz and W. R. Hulsizer:Proc. of the 1975 Gas Turbine Materials in Marine Environment Conference, MCIC, Columbus, Ohio, 1974, pp, 735–57.
H. Morrow III, D. L. Sponseller, and E. Kalns:Met. Trans., 1974, vol. 5, pp. 673–83.
J. G. Fountain, F. A. Golightly, F. H. Scott, and G. C. Wood:Oxid. Met., 1976, vol. 10, pp. 34M5.
E. J. Feiten:Oxid. Met., 1976, vol. 10, pp. 23–28.
E. J. Feiten and F. S. Pettit:Oxid. Met., 1976, vol. 10, pp. 189–223.
Metals Handbook, 8th ed., vol. 1, p. 490, American Society for Metals, Metals Park, Ohio, 1961.
V. H. Esser and H. Eusterbrock:Arch. Eisenhuettenw., 1941, vol. 14, pp. 341–55.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jackson, M.R., Rairden, J.R. The aluminization of platinum and platinum-coated IN-738. Metall Trans A 8, 1697–1707 (1977). https://doi.org/10.1007/BF02646872
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02646872