Abstract
The method of calculating the shape of forming limit diagrams (FLDs) using a high-exponent yield criterion with the Marciniak and Kuczynski (M-K) analysis has been extended to include the effects of changing the strain paths and applied to aluminum alloy 2008 T4. Calculations incorporating abrupt path changes agreed with the general trends found experimentally. If the first stage of strain is under biaxial tension, the subsequent FLD shifts to the right and down with respect to the original FLD, whereas it shifts to the left and up when the first stage of strain is in uniaxial tension. Calculations introducing gradual strain-path changes, characteristic of stretching over a hemispherical dome, predict that the minimum of the FLD shifts to the right.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Z. Marciniak and K. Kuczynski:Int. J. Mech. Sci., 1967, vol. 9, pp. 609–20.
A. Barata da Rocha, F. Barlat, and J.M. Jalinier:Mater. Sci. Eng., 1984-1985, vol. 68, pp. 151–64.
A. Barata da Rocha: inForming Limit Diagrams: Concepts, Methods and Applications, R.H. Wagoner, K.S. Chan, and S.P. Keeler, eds., TMS-AIME, Warrendale, PA, 1989, pp. 184–202.
A. Parmar and P.B. MellonInt. J. Mech. Sci., 1982, vol. 24, pp. 385–91.
D. Lee and F. Zaverl, Jr.: Int.J. Mech. Sci., 1982, vol. 24, pp. 157–73.
Owerby and Duncan:Int. J. Mech. Sci., 1971, vol. 13, pp. 217–29.
D.D. Olander and A.K. Miller: inControlling Sheet Metal Forming Processes, Iddrg, ed., ASM INTERNATIONAL, Warrendale, PA, 1988, pp. 133–44.
K.S. Chan:Metall. Trans. A, 1985, vol. 16A, pp. 629–39.
J. Lian, F. Barlat, and B. Baudelet:Int. J. Plast., 1989, vol. 5, pp. 131–47.
A. Graf and W.F. Hosford: inForming Limit Diagrams: Concepts, Methods and Applications, R.H. Wagoner, K.S. Chan, and S.P. Keeler, eds., TMS-AIME, Warrendale, PA, 1989, pp. 153–63.
A. Graf and W.F. Hosford:Metall. Trans. A, 1990, vol. 21A, pp. 87–94.
A.K. Ghosh:Met. Eng. Q., 1975, vol. 15, pp. 53–64.
R. Hill:Proc. R. Soc, Published by the Society of Manufacturing Engineers. Meeting: May 1979, Dearborn, MI, 1948, vol. 193A, pp. 281–97.
W.F. Hosford:Proc. 7th NAMRC, Dearborn, MI, May 1979, pp. 191-96.
A. Graf and W.F. Hosford:Metall. Trans. A, 1993, vol. 24A, pp. 2503–12.
K. Narasimhan and R.H. Wagoner:Metall. Trans. A, 1991, vol. 22A, pp. 2655–65.
R. Logan and W.F. Hosford:Int. J. Mech. Sci., 1980, vol. 22, p. 419.
A. Barata da Rocha and J.M. Jalinier:Trans. Iron Steel Inst. Jpn., 1984, vol. 24, pp. 132–40.
J.H. Schmitt, J. Raphael, E. Rauch, and P. Martin:Computational Methods for Predicting Material Processing Defects, Elsevier, New York, NY, 1987, pp. 309–18.
M. Zandrahimi, S. Platias, D. Price, D. Barrett, P.S. Bathe, W.T. Roberts, and D.V. Wilson:Metall. Trans. A, 1989, vol. 20A, pp. 2471–82.
S.S. Hecker:7th Biennial Congress of the IDDRG, Amsterdam, Oct. 1972, Paper 5C.
A.K. Ghosh and S.S. Hecker:Metall. Trans., 1974, vol. 5, pp. 2161–64.
K.S. Raghavan:A Simple Technique to Determine In-Plane Forming Limit Curves, presented at the 1992 NADDRG Spring Meeting, April 28-30, 1992, Dearborn, MI.
K.S. Raghavan, R.C. Van Kuren, and H. Darlington: SAE Paper No. 920437, published in: Autobody Stamping Applications and Analysis SOC, Warrendale, PA, 1992.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Graf, A.F., Hosford, W.F. Calculations of Forming Limit Diagrams for Changing Strain Paths. Metall Trans A 24, 2497–2501 (1993). https://doi.org/10.1007/BF02646528
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02646528