Abstract
The aging behavior of iron-carbon martensite (1.13 wt Pct C) between -190 °C and 450 °C was investigated by quantitative analysis of the corresponding changes in volume and enthalpy. A method to determine activation energies of the occurring solid-state transformations by performing non-isothermal measurements of some physical property of the specimen has been described. Martensitic specimens were prepared by carburizing pure iron and quenching in brine and liquid nitrogen. The dilatometric and calorimetric experiments were supplemented with microhardness measurements. At least five different stages of structural change can be distinguished, which are quantitatively analyzed in terms of their effects on volume and enthalpy: (i) transformation of retained austenite into martensite (between −180 and −100 °C); (ii) redistribution of carbon atoms (below 100 °C); (iii) precipitation of transition carbide (between 80 and 200 °C); (iv) decomposition of retained austenite (between 240 and 320 °C); and (v) conversion of transition carbide into cementite (between 260 and 350 °C).
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A.M. Sherman, G.T. Eldis, and M. Cohen:Metall. Trans. A, 1983, vol. 14A, pp. 995–1005.
P.C. Chen and P.G. Winchell:Metall. Trans. A, 1980, vol. 11A, pp. 1333–39.
P.C. Chen, B.O. Hall, and P.G. Winchell:Metall. Trans. A, 1980, vol. 11A, pp. 1323–31.
G.B. Olson and M. Cohen:Metall. Trans. A, 1983, vol. 14A, pp. 1057–65.
M.L. Bernshtein, L.M. Kaputkina, and S.D. Prokoshkin:Scripta Metall., 1984, vol. 18, pp. 863–68.
H. Hayakawa, M. Tanigami, and M. Oka:Metall. Trans. A, 1985, vol. 16A, pp. 1745–50.
S. Nagakura, Y. Hirotsu, M. Kusunoki, T. Suzuki, and Y. Nakamura:Metall. Trans. A, 1983, vol. 14A, pp. 1025–31.
M. Kusunoki and S. Nagakura:J. Appl. Cryst., 1981, vol. 14, pp. 329–36.
M.K. Miller, P.A. Beaven, and G.D.W. Smith:Metall. Trans. A, 1981, vol. 12A, pp. 1197–1204.
M.K. Miller, P.A. Beaven, S.S. Brenner, and G.D.W. Smith:Metall. Trans. A, 1983, vol. 14A, pp. 1021–24.
L. Chang and G.D.W. Smith: personal communication, Univ. of Oxford, 1987.
E.J. Mittemeijer, A. van Gent, and P. J. van der Schaaf:Metall. Trans. A, 1986, vol. 17A, pp. 1441–45.
E.J. Mittemeijer, Liu Cheng, P.J. van der Schaaf, C.M. Brakman, and B.M. Korevaar:Metall. Trans. A, 1988, vol. 19A, pp. 925–32.
C. F. Jatczak, J. A. Larson, and S. W. Shiu:Retained Austenite and Its Measurement by X-Ray Diffraction, SP 453, SAE Inc. Warren- dale, PA, 1980.
C. A. V. de A. Rodrigues, C. Prioul, J. Plusquellec, and P. Y. Azou:Proc. Int. Conf. on Solid Phase Transformations. Carnegie-Mellon University, Pittsburgh, PA, 1981, pp. 1391–95.
I. Wierszyłłowski: Technical University of Poznan, private communication, 1987.
G. R. Speich:Trans. TMS-AIME, 1969, vol. 245, pp. 2553–64.
W. K. Choo and R. Kaplow:Acta Metall., 1973, vol. 21, pp. 725–32.
M. van Rooyen and E. J. Mittemeijer:Scripta Metall., 1982, vol. 16, pp. 1255–60.
B. M. Mogutnov, V. M. Polovov, and L. A. Shvartsman:Phys. Met. Metall., 1968, vol. 25, pp. 97–105.
K.H. Jack:J.I.S.I., 1951, vol. 169, pp. 26–36.
Y. Hirotsu and S. Nagakura:Acta Metall., 1972, vol. 20, pp. 645–55.
L. G. E. Hofer, E. M. Cahn, and W. C. Peebles:J. Am. Chem. Soc, 1949, vol. 71, pp. 189–95.
P.G. Winchell and M. Cohen:Trans. A.S.M., 1962, vol. 55, pp. 347–61.
R.C. Ruhl and M. Cohen:Trans. AIME, 1969, vol. 245, pp. 241–51.
C.S. Roberts:Trans. AIME, 1953, vol. 197, pp. 203–04.
S. Nagakura:J. Phys. Soc. Japan, 1959, vol. 14, pp. 186–95.
B.G. Lifshitz:Physical Properties of Metals and Alloys, Mashgiz, Moscow, 1956, p. 257.
Powder Diffraction File, A.S.T.M. card, 6-0688.
M. Cohen:Trans. J.I.M., 1970, vol. 11, pp. 145–51.
Y. Ohmori and S. Sugisawa:Trans. J.I.M., 1971, vol. 12, pp. 170–78.
Y. Imai, T. Ogura, and A. Inoue:Trans. I.S.I.J., 1973, vol. 13, pp. 183–91.
C. Wells, W. Batz, and R. F. Mehl:Trans. AIME, 1950, vol. 188, pp. 533–60.
F. S. Buffington, K. Hirano, and M. Cohen:Acta Metall., 1961, vol. 9, pp. 434–39.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cheng, L., Brakman, C.M., Korevaar, B.M. et al. The tempering of iron- carbon martensite; dilatometric and calorimetric analysis. Metall Trans A 19, 2415–2426 (1988). https://doi.org/10.1007/BF02645469
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02645469