Abstract
Lignocellulosics can be separated into their three main components by extraction with acetic acid, containing 0.1% hydrogen chloride, at 110°C. The residual pulp can be bleached in the same solvent with peracetic acid, which is formed in situ when adding hydrogen peroxide. Hemicelluloses and lignin are obtained in a low condensed and relatively reactive form that may be converted into valuable chemical raw materials. Some aspects of such conversions are discussed.
Zusammenfassung
Die Auftrennung von Lignocellulosen in ihre drei Hauptkomponenten gelingt durch Extraktion mit Essigsäure, die 0,1% Salzsäure enthält, bei 110°C. Der zurückbleibende Zellstoff läßt sich im gleichen Lösungsmittel mit Peressigsäure bleichen, die in situ durch Zugabe von Wasserstoffperoxid entsteht. Hemicellulosen und Lignin werden in weinig kondensierter, relativ reaktiver Form erhalten und eignen sich für die Herstellung wertvoller chemischer Rohstoffe. Einige Aspekte dieser Umwandlungen werden diskutiert.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literature
Ayla, C.; Nimz, H.H. 1984: Die Verwendung von Ablaugenlignin bei der Herstellung von Holzwerkstoffen. Holz Roh- Werkstoff 42:415–419
Bicker, R. (Anmelder Hoechst AG) 1983: Verfahren zur Herstellung von 5-Acetoxymethylfurfural. DE 3309564 AT, 17.3.83, Offenlegung 20.9.84
Dadgar, A.M.; Foutch, G.L. 1983: The production of hydroxymethylfurfural from saw dust. Biotechnol. Bioeng. Symp. 13:41–52
Esnouf, C. 1985: What future for the thermochemical liquefaction of biomass. Proc. 3rd E.C. Conference, Enrgy from Biomass, Venice, Italy, 25.–29. 3. 85, p. 942–948
Leonard, R.H. 1956: Levulinic acid as a basic chemical raw material. Ind. Eng. Chem. 48:1331–1341
Moffatt, J.M.; Overend, R.P. 1985: Direct liquefaction of wood through solvolysis and catalytic hydrogenation: an engineering assessment. Biomass 7:99–123
Nimz, H.H. 1983: Lignin-based wood adhesiver. In: A. Pizzi (Ed.): Wood adhesives pp. 248–288, New York and Basel: Marcel Dekker, Inc.
Nimz, H.H.; Casten, R. 1984: Holzaufschluß mit Essigsäure. DE 34 45 132.3, 11.12.84
Nimz, H.H.; Hitze, G. 1980: The application of spent sulfite liquor as an adhesive for particleboards. Cellulose Chem. Technol. 14:371–382
Paszner, L.; Quinde, A.A.; Meshgini, M. 1985: ACOS-accelerated hydrolysis of wood by acid catalyzed organosolv means. Proc. Intern. Symp. Wood Pulping Chem. p. 235–240. Vancouver, 26.–30.8.
Rexen, F.; Munck, L. 1984: Cereal crops for industrial use in Europe. Report Commission Europ. Com., EUR 9617 EN
Stenzenberger, H.; Herzog, M.; Scheiblich, R.; Haberbosch, E. 1983: Hydroxymethylfurfurol, Verfahren zur Herstellung und Anwendung für Polymere. BMFT-Report 03 VM 059
Szmant, H.H.; Chundury, D.D. 1981: The preparation of 5-hydroxymethylfurfuraldehyde from high fructose corn syrup and other carbohydrates. J. Chem. Tech. Biotechnol. 31:135–145
Thomas, J.J.; Barile, R.G. 1984: Conversion of cellulose hydrolysis products to fuels and chemical feedstocks. Proc. Energy from Biomass and Wastes VIII, p. 1461–1494. Lake Buena Vista, Florida, USA, 30.1–3.2.
Van der Klashorst, G.H.; Cameron, F. A.; Pizzi, A. 1985: Ligninbased cold setting wood adhesives structural finger joints and glulam. Holz Roh-Werkstoff 43:477–481
VDP (Verband Deutscher Papierfabriken) 1984: Papier '84, Ein Leistungsbericht der deutschen Zellstoff-und Papierindustrie
Zander, M. 1984: Studie zur Nutzung von Lignin als Rohstoff für Chemieprodukte. BMFT-Report T84–199
Author information
Authors and Affiliations
Additional information
Vortrag zum Workshop “Lignocellulosic Biomass and Processing” der Europäischen Förderation Biotechnologie in Oberursel am 10. 12. 1985
The authors are grateful to Mrs. Carola Struck and to Dr. Othar Kordsachia for determining the pulp properties
Rights and permissions
About this article
Cite this article
Nimz, H.H., Casten, R. Chemical processing of lignocellulosics. Holz als Roh-und Werkstoff 44, 207–212 (1986). https://doi.org/10.1007/BF02611993
Issue Date:
DOI: https://doi.org/10.1007/BF02611993