Article PDF
Avoid common mistakes on your manuscript.
References
Adler, A. A., Reismann, H. 1974. Moving loads on an elastic plate strip. J. Appl. Mech. 41: 713–718
Allen, F. E. 1972. The merits of the high strain bandmill Forest Ind. Rev. 4(2): 9–15
Allen, F. E. 1973. High Strain/Thin Kerf. Modern sawmill techniques. Proc. First Sawmill Clinic. Portland, Oregon, Feb. 1973. pp. 167–181.
Allen, F. E. 1975. Some considerations in machining southern hard-woods with multiple bandsaws. FPRS Seperate No. MS-75-S55
Allen, F. E. 1976. Part One: Some considerations of bandmill feeds, speeds, design. Part Two: Some considerations in roll tensioning bandsaw blades. Proc. Lumber Manufacturing Conf., Seattle, Washington Nov. 1976, pp 1–24
Alspaugh, D. W. 1967. Torsional vibration of a moving band. J. Frank. Inst. 283 (4): 328–338
Ames, W. F., Lee, S. Y., Zaiser, J. N. 1968. Nonlinear vibration of a travelling threadline. Int. J. Nonlinear Mech. 3: 449–469
Anderson, D. L. 1974. Natural frequency of lateral vibration of a multiple span moving bandsaw. Canada West. Forest Prod. Lab. January 1974
Aoyama, T. 1958. The effect of feeding and cutting speedto the heat generation on saw tooth. J. Jap. Wood Res. Soc. 4 (2): 55–59.
Aoyama, T. 1970. Tensioning of bandsaw blades by rolls, I. Calculation of crown, II. Calculation of tension. J. Jap. Wood Res. Soc. 16 (8): 370–381
Aoyama, T. 1971. Tensioning of bandsaw blades by rolls. III. Effect of Saw Blade Thickness. IV. Effect of Saw Blade Width. J. Jap. Wood Res. Soc. 17 (5): 188–202
Aoyama, T. 1974. Tensioning of bandsaw blades by rolls. V. The Effects of Rolling Repetition, Saw Blade Hardness, and Rolls With Different Sectional Diameters. J. Jap. Wood Res. Soc. 20 (11): 523–527
Archibald, F. R., Emslie, A. G. 1958. The Vibration of a String Having Uniform Motion Along Its Length. J. Appl. Mech. 25: 347–348
Bapat, V. A., Srinivasan, P., 1967. Nonlinear Transverse Oscillations in Travelling Strings by the Method of Harmonic Balance. J. Appl. Mech. 34 (3): 775–777
Barakat, R. 1968. Transverse Vibrations of a Moving Rod. J. Acoust. Soc. Am. 43 (3): 533–539.
Berlin, E. P. 1969. Experimental Investigations of the Effect of Aerostatic Guides on the Tranverse Stability of a bandsaw blade. Lesn. Zh. 12 (2): 85–87
Birkeland, R. 1968. Results of Measurements of the Sawing Accuracy of Circular Sawmills and Bandmills. Norsk Skogindustri 22 (6): 192–211
Breznjak, M., Moen, K. 1972. On the Lateral Movement of the bandsaw blade Under Various Sawing Conditions. Norsk Treteknisk Inst. Rep. No. 46
Cho, H. S., Mote, C. D., Jr. 1977. Aerodynamically Induced Vibration and Noise in Circular Saws. Proc. Wood Mach. Sem. Un. Cal. Forest Prod Lab. pp. 207–245
Chubachi, T. 1957. Lateral Vibration of Axially Moving Wire or Belt Form Materials—Experiment. Bull. JSME 23 (127): 205–210
Chubachi, T. 1958. Lateral Vibration of Axially Moving Wire or Belt Form Materials. Bull. JSME 1 (1): 24–29
Doi, O. 1964. Heat tensioning of band saw blade. Bull. ISME 67 (551): 1838–1848.
Doi, O., Kikukawa, S., Saito, I., Sugihara, H., Tanijiri, S. 1970. Studies on sawing with a double-edged bandsaw blade. Canada Dept. Fish. & Forest. Translation No. OOFF 148
Doyle, E., Hornung, K. G. 1969. Lateral vibration of V-belts. ASME Paper No. 69-VIBR-29
Eklund, U. 1972 The daylight gap as a measure for the tensioning of bandsaw blades. Svenska Träforskningsinstitutet Rep. No. 227 (A)
Eklund, U. 1974. Pressure Guides at timber receiving bandsaws. Svenska Träforskningsinstitute Rep. No. 244
Ellis, R. W., Mote, C. D., Jr. 1977. A feedback vibration controller for circular saws. Proc. IACC. pp. 1193–1199
Feoktistov, A. E. 1960. The stability of sawbldes under feed pressure. Les. Zh. 3 (3): 95–106
Flaherty, F. T., Jr. 1968. Transient resonance of an ideal string under a load moving with varying speed. Int. J. Solids Structure. 4: 1221–1231
Foschi, R. O. 1975. The light gap technique as a tool for measuring residual stresses in bandsaw blades. Wood Sci. Technol. 9: 243–255
Foschi, R. O., Porter, A. W. 1970. Lateral and edge stability of high strain bandsaws Canada, West. Forest Prod. Lab. Rep. No. VP-X-68
Fryba, L. 1972. Vibration of solids and structures under moving loads. Noordhoff Int. Publ., Groningen, The Netherlands
Housner, G. W. 1952. Bending vibrations of a pipeline containing flowing fluid. J. Appl. Mech. 19: 205–209
Hsiang, P. C. 1966. Vibrations of a moving threadline having a geometric nonlinearity. M. S. Thesis. Un. Delaware
Hsu, T. R., Trasi, S. R. 1976. On the analysis of residual stresses introduced in sheet metal by thermal shock treatment. J. Appl. Mech. 43: 117–123
Jones, D. S. 1968. A psychiatric examination of a bandsaw... or why a bandsaw cracks. Australian Timber J. June 1968, pp. 63–69
Kim, Y. I., Tabarrok, B. 1972. On the nonlinear vibration of travelling strings. J. Frank. Inst. 293 (6): 381–399
Kirbach, E., Bonac, T. 1977a. The effect of tensioning and wheel tilting on the torsional and lateral fundamental frequencies of bandsaw blades. Wood and Fiber (in press)
Kirbach, E., Bonae, T. 1977b. An experimental study on the lateral natural frequency of bandsaw blades. Wood and Fiber (submitted for poblication)
Kitayama, S., Sugihara, H. 1968. On noise analysis of a bandsaw machine. J. Jap. Wood Res. Soc. 14 (3): 140–147
Krilov, A. 1975. Einige Aspekte der Konstruktion von Bandsägemaschienen mit hoher Blattspannung. Holztechnologie 16 (2): 109–111
Labara, J. J. 1974. The axially stressed LIM reaction rail subjected to a moving load. Int. J. Solids Structures 10: 1155–1170
Lai, J., Chen, C. H. 1971. Vibration and dynamic stability of an axially moving belt. ASME Paper No. 71-VIBR-31
Liu, H. S., Mote, C. D., Jr. 1974. Dynamic response of pipes transporting fluids. Trans ASME 96 (B): 591–596
Mahalingam, S. 1957. Transverse vibrations of power transmission chains. British. J. Appl. Phys. 8: 145–148
Miranker, W. L. 1960. The wave equation in a, medium in motion. IBM J. R & D 4 (1): 36–42
Mote, C. D., Jr. 1965a. A study of bandsaw vibrations. J. Frank. Inst. 279 (6): 430–444
Mote, C. D., Jr. 1965b. Some dynamic characteristics of bandsaws. Forest Prod. J. 15 (1): 37–41
Mote, C. D., Jr. 1966. On the nonlinear oscillations of an axially moving string. J. Appl. mech. 33: 463
Mote, C. D., Jr. 1968a. Dynamic stability of an axially moving band. J. Frank. Inst. 285 (5): 329–346
Mote, C. D. Jr. 1968b. Divergence buckling of an edge-loaded axially moving band. Int. J. Mech. Sci. 10: 281–295
Mote, C. D. Jr. 1968c. Parametric excitation of an axially moving string. J. Appl. Mech. 35 (1): 171–172
Mote, C. D., Jr. 1972. Dynamic stability of axially moving materials. Shock & Vibration Digest 4 (4): 2–11
Mote, C. D., Jr. 1975. Stability of systems transporting accelerating axially moving materials. Trans. ASME 97 (G): 96–98.
Mote, C. D., Jr., Holøyen, S. 1977. Feedback control of circular saw temperature using induction heating. Trans. ASME Series B (in press)
Mote, C. D., Jr. 1966. Theoretical and experimental bandsaw vibrations. Trans. ASME 88 (B): 151–156
Mote, C. D., Jr., Thurman, A. L. 1971. Oscillation modes of an axially moving material J. Appl. Mec. 38: 279–280
Mote, C. D., Jr., Szymani, R. 1977. Principal developments in thin circular saw vibration and control research. Part 1: Vibration of circular saws. Holz Roh-Werkstoff 35 (5): 188–196
Moustafa, M. A., Salman F. K. 1976. Dynamic properties of a moving threadline. Trans. ASME 98 (B): 368–378
Naguleswaran, S., Williams C. J. H. 1968a. Lateral vibration of bandsaw blades, pulley belts, and the like. Int. J. Mech. Sci. 10: 239–250
Naguleswaran, S., Williams, C. J. H. 1968b. Lateral vibration of a pipe conveying a fluid. J. Mech. Eng. Sci. 10 (3): 228–238
Niordson, F.I.N. 1953. Vibration of a cylindrical tube containing a flowing fluid. Trans. Royal Inst. Tech. Sweden 73
Novosel'tsev, V. P., Seleznev, A. F. 1974. Effect of changes in tension force on the dynamic stability of frame saws and band saws. Lens. Zh. 17 (6): 75–78
Pahlitzsch, G. 1962. Internationaler Stand der Forschung auf dem Gebiet des Sägens. Holz Roh-Werkstoff 20 (10): 381–392
Pahlitsch, G., Dziobek, K. 1959. Untersuchungen an einer horizontalen Blockbandsäge. Holz Roh-Werkstoff 17 (9): 364–376
Pahlitsch, G., Eckert, U. 1975 Investigations, of bandsaw noise. Holz- und Kunststoffverarbeitung 10 (7): 518–522
Pahlitzsch, G., Puttkammer, K. 1972. Die Beanspruchung von Bandsägeblättern: Spannungen und Festigkeitsgrenzen. Holz Roh-Werkstoff 30 (5): 165–174
Pahlitzsch, G., Puttkammer, K. 1973. Erittlung, der Steifheit von Bandsägeblättern. Holz Roh-Werkstoff 31 (4): 161–167
Pahlitzsch, G., Puttkammer, K. 1974a Beurteilungskriterien, für die Auslenkungen von Bandsägeblättern. Erste Mitteilung. Holz Roh-Werkstoff 32 (2): 52–57
Pahlitsch, G., Puttkammer, K. 1974b. Beurteilungskriterien für die Auslenkungen von Bandsägeblättern. Zweite Mitteilung. Holz Roh-Werkstoff, 32 (8): 295–302
Pahlitzsch, G., Puttkammer, K. 1975. Schnittversuche beim Bandsägen. Holz Roh-Werkstoff 33 (5): 181–186
Pahlitzsch, G., Puttkammer, K. 1976a. Schnittversuche beim Bandsägen. Holz Roh-Werkstoff 33 (1): 17–21
Pahlitzsch, G., Puttkammer, K. 1976b. Beurteilungskriterien für die Auslenkungen von Bandsägeblättern. Dritte Mitteilung. Holz Roh.-Werkstoff 34: 413–426
Porter, A. W. 1971. Some engineering considerations of high strain band saws Forest Prod. J. 21 (4): 24–32
Rhodes, J. E., Jr. 1970. Parametric self-excitation of a belt into transverse vibration. J. Appl. Mech. 37 (4): 1055–1060
Sack, R. A. 1954. Transverse oscillations in travelling strings. British J. Appl. Phys. 5: 224–226
Sagartz, M. J., Forrestal, M. J. 1975. Motion of a stretched string loaded by an accelerating force. J. Appl. Mech. 43 (2): 505–506
Saljé, E., Thomas, D. 1976. A novel guide for band saw blades. Holz-Zbl. 102 (148): 2109
Sanev, V. I. 1969. Heating of bandsaw blades while sawing wood. Lesn. Zh. 12 (3): 64–67
Sanev, V. I., Plujusnin, V. N. 1969. Theoretical investigation of the temperature distribution across the width of the blade of a bandsaw edger. Lesn. Zh. 12 (5): 61–67
Sanev, V. I., Plujusnin, V. N. 1970. Temperature gradient along the length of bandsaw blades while sawing wood. Lesn. Zh. 13 (2): 59–64
Shih, L. Y. 1971. Three dimensional nonlinear vibration of a travelling string. Int. J. Non-Linear Mech. 6: 427–434
Shtol'tser, N. G. 1976. Combined automatic regulation of feed speed in saws. Lesn. Zh. 3: 122–126
Simpson, A. 1972. On the oscillatory motions of translating elastic cables. J. Sound & Vibration 20 (2): 177–189
Simpson, A. 1973. Transverse modes and frequencies of beams translating between fixed end supports. J. Mech. Eng. Sci. 15 (3) 159–164
Sinha, S. C., Srinivasan, P. 1975. Free transverse vibrations of an axially moving mass. Rev. Roum. Sci. Tech. 20 (4): 535–553.
Skutch, R. 1897. Über die Bewegung eines gespannten Fadens, welcher gezwungen ist, durch zwei feste Punkte mit einer konstanten Geschwindigkeit, zu gehen und zwischen denselben in Transver-salschwingungen von geringer Amplitude versetzt wird. Annalen der Physik und Chemie 61: 190–195
Soler, A. I. 1968. Vibration and stability of a moving band. J. Frank. Inst. 286 (4): 295–307
Sugihara, H. 1953. Forces acting on a bandsaw. Jap. Wood. Ind. 8 (5): 38–45
Sugihara, H. 1965. The influence of temperature on the stability of saw blades. IUFRO Proc. Vol. 3, Sect. 41
Sugihara, H. 1977. Theory on running stability of bandsaw blades. Proc. Wood Mach. Sem. Un. Cal. Forest Prod. Lab., pp. 99–110
Swope, R. D., Ames, W. F. 1963. Vibrations of a moving threadline. J. Frank. Inst. 275 (1): 36–55
Szymani, R., Mote, C. D. Jr. 1977. Principal developments in thin circular saw vibration and control research. Part 2: Reduction and control of saw vibration. Holz Roh-Werkstoff 35 (6): 219–225
Tabarrok, B., Leech, C. M., Kim, Y. I. 1974. On the dynamics of an axially moving bean. J. Frank. Inst. 297 (3): 201–220
Thunell, B. 1970. Die Stabilität des Bandsägeblattes. Holz Roh-Werkstoff 28 (9): 343–348
Thunell, B. 1971. Dimensional accuracy in sawing. Proc. Wood Mach. Sem. Un. Cal. Forest Prod. Lab., pp. 39–51
Thunell, B. 1972. The stresses in a bandsaw blade. Paperi ja Puu 54 (11): 759–764
Thunell, B. 1973. Ergonomic aspects: noise problems in the sawmill. Proc. Wood Mach. Sem. Un. Cal. Forest Prod. Lab., pp. 193–204
Thurman, A. L., Mote, C. D., Jr. 1969a. Free, periodic nonlinear oscillation of an axially moving strip. J. Appl. Mech. 36: 83–91
Thurman A. L., Mote, C. D., Jr. 1969b. Nonlinear oscillation of a cylinder containing a flowing fluid. Trans. ASME 91 (B): 1147–1155
Ting, E. C., Genin, J., Ginsberg, J. H. 1974. A general algorthm for moving mass problems. J. Sound & Vibration 33 (1): 49–58
Trubnikov, I. I. 1965a. Stresses in bandsaw blades subjected to surface tensioning. Lesn. Zh. 8 (2): 104–108
Trubnikov, I. I. 1965b. Fatigue failure of band saw blades. Lesn. Zh. 8 (6): 91–93
Wüster, E. 1966. Die Berechnung der Reckvorspannungen in Gatter-und Bandsägeblättern. Holz Roh-Werkstoff 24 (14): 134–144
Yurev, Y. I., Veselkov, V. I. 1972. Effect of the operation of cutting the teeth on the stress state of band resaws. Lesn. Zh. 15 (1): 65–67
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ulsoy, A.G., Mote, C.D. & Szymni, R. Principal developments in band saw vibration and stability research. Holz als Roh-und Werkstoff 36, 273–280 (1978). https://doi.org/10.1007/BF02610748
Issue Date:
DOI: https://doi.org/10.1007/BF02610748