Abstract
The addition of regularly spaced deeps (pools) and shallows (riffles) that provide a variety of flow conditions, areal sorting of stream-bed material, cover for wildlife, and a positive aesthetic experience, may be desirable in many channel projects. Such designs will reduce adverse environmental impacts of stream channel modifications.
Analysis of variance for pool-to-pool spacing data suggests that there is no significant difference with respect to channel width between pools that form in natural streams and those in streams affected by a variety of human uses. Short of channelization, which changes the channel width, pools and riffles, within limits, are not particularly sensitive to environmental stress.
Experiments in Gum Branch near Charlotte, North Carolina, support the hypothesis that channel form and process evolve in harmony and that manipulation of cross-channel morphology can influence the development of desired channel processes. Planned manipulation of its channel form induced Gum Branch to develop as desired. Morphologic stability consisting of incipient point bars, pools, and riffles was maintained over a period of high magnitude flood events, only to be degraded later by a wave of sediment derived from upstream construction and stream-bank failures. Thus, environmentally desirable channel morphology in urban streams cannot remain stable if changes in the sediment load or storm-water runoff exceed the limits of the stream's ability to make internal adjustments while maintaining morphologic stability.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References Cited
Andrews, E. D., 1976, River channel scour and fill: Geol. Soc. America, abstracts with programs, v. 8, no. 6, p. 755.
Corning, R. V., 1975, Channelization: shortcut to nowhere: Virginia Wildlife, Feb., p. 6–8.
Daniels, R. B., 1960, Entrenchment of the Willow Drainage Ditch, Harrison County, Iowa: Am. Jour. Sci., v. 258, p. 161–176.
Eiserman, F., G. Dern, and J. Doyle, 1975, Cold water stream handbook for Wyoming: U.S. Soil Conservation Service and Wyoming Game and Fish Department, 38 p.
Emerson, J. W., 1971, Channelization: a case study: Science, v. 173, p. 325–326.
Keller, E. A., 1976, Channelization: environmental, geomorphic and engineering aspects,in D. R. Coates (ed.), Geomorphology and engineering: Stroudsburg, Pennsylvania, Dowden Hutchinson and Ross Inc., p. 115–140.
——, 1975, Channelization: a search for a better way: Geology, v. 3, no. 5, p. 246–248.
——, 1972, Development of alluvial stream channels: a five-stage model: Geol. Soc. America Bull., v. 83, p. 1531–1536.
——, 1971, Areal sorting of bed-load material: the hypothesis of velocity reversal: Geol. Soc. America Bull., v. 82, p. 753–756.
--, and E. K. Hoffman, 1976, A sensible alternative to stream channelization: Public Works, Oct., p. 70–72.
--, in press, Urban streams: sensual blight or amenity: Jour. Soil and Water Conservation.
Keller, E. A., and W. N. Melhorn, 1973, Bedforms and fluvial processes in alluvial stream channels: selected observations,in M. Morisawa (ed.), Fluvial geomorphology: SUNY-Binghamton, N.Y., Proc. Fourth Annual Geomorphology Symposium, Pub. Geomorphology, p. 253–283.
--, in press, Rhythmic spacing and origin of pools and riffles: Geol. Soc. America Bull.
Leliavsky, de, N., 1894,in Leliavsky, S., 1966, An introduction to fluvial hydraulics: Dover, N.Y., p. 162–165.
Leopold, L. B., 1977, A reverence for rivers: Geology, v. 5, p. 429–430.
——, M. G. Wolman, and J. P. Miller, 1964, Fluvial processes in geomorphology: San Francisco, W. H. Freeman and Co., 522 p.
Lokhtine, 1909,in S. Leliavsky, 1966, An introduction to fluvial hydraulics: Dover, N.Y., p. 8–10.
McHarg, I. L., 1971, Design with nature: New York, Doubleday, p.
Morisawa, M., 1976, Channelization: impacts and solutions: Geol. Soc. America, abstracts with programs, v. 8, no. 6, p. 1019.
--, and R. Vemuri, 1975, Multi-objective planning and environmental evaluation of water resource systems: Final Report OWRT Project C-6065, 99 p.
Stuart, T. A., 1953,in L. B. Leopold, M. G. Wolman, and J. P. Miller, 1964, Fluvial processes in geomorphology: San Francisco, W. H. Freeman and Co., p. 206–208.
Yearke, L. W., 1971, River erosion due to channel relocation: Civil Eng., v. 41, p. 39–40.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Keller, E.A. Pools, riffles, and channelization. Geo 2, 119–127 (1978). https://doi.org/10.1007/BF02380474
Issue Date:
DOI: https://doi.org/10.1007/BF02380474