Abstract
Electronic-speckle-pattern interferometry and moiré interferometry have been used to calculateK 1 andJ for compact tension specimens. Automated-fringe-pattern analysis enables the full-field of data to be used with the minimum of operator intervention. Measurements are shown to be accurate to within 10 percent. TheJ-measurement procedure employed could form the basis of an automatic-fault detection system.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Dudderar, T.D. andGorman, H.J., “The Determination of Mode 1 Stress-intensity Factors by Holographic Interferometry,”Experimental Mechanics,13 (13),145–149 (1973).
Marshall, S.J., Rixon, R.C., Caulfield, M.M. andMacKenzie, P.M., “The Application of Automatic Fringe Analysis in Fracture Mechanics,”Optics and Lasers in Eng.,7,175–193 (1987).
Huntley, J.M. andField, J.E., “Measurement of Crack Tip Displacement Field Using Laser Speckle Photography,”Eng. Fract. Mech.,30 (6),779–790 (1988).
Jones, R. andWykes C., Holographic and Speckle Interferometry, 2nd Ed., Cambridge Univ. Press, Cambridge, Chap. 4 (1988).
Holscher, C., Gulker, G., Hinsch, K., Kramer, A. andNeunaber, H., “The Investigation of Natural Stones Under Test-conditions by ESPI,”Proc. Soc. of Photo-optical Instr. Eng., SPIE, Bellingham, WA,863,162–166 (1987).
Moore, A.J. and Tyrer, J.R., “Surface Strain Measurement with ESPI Applied to Fracture Mechanics,” Proc. Hologram Interferometry and Speckle Metrology, 192–198, SEM (1990).
Kobayashi, A.S., “Photoelasticity Techniques,” Experimental Techniques in Fracture Mechanics, ed. A.S. Kobayashi, Iowa State Press, 126–142 (1973).
E1290-89 Standard Test Method for Crack-tip Opening Displacement (CTOD) Fracture Toughness Measurement, Amer. Soc. Test and Mat. (1989).
Moore, A.J. andTyrer, J.R., “An Electronic Speckle Pattern Interferometer for Complete. In-plane Displacement Measurement,”Measurement Sci. and Tech.,1 (10),1024–1030 (1990).
Anon, “Optecord Live Fringe Interferometer: Instruction Manual,” Strathclyde Univ.
Barker, D.B., Sanford, R.J. andChona, R., “Determining K and Related Stress-field Parameters from Displacement Fields,”Experimental Mechanics,25 (12),399–407 (1985).
Sanford, R.J., “A Critical Re-examination of the Westergaard Method for Solving Opening-mode Crack Problems,”Mech. Res. Comm.,6 (5),289–294 (1979).
Rice, J.R. and Rosengren, G.F., “Plane Strain Deformation near a Crack Tip in a Power-law Hardening Material,” J. Mech. and Physics of Solids, 16 1–12 (1968).
Timoshenko, S.P. and Goodier, J.N., Theory of Elasticity, 3rd Ed., McGraw-Hill (eqs 134 and 26, 27) (1970).
Chona, R., Irwin, G.R. and Sanford, R.J., “Influence of Specimen Size and Shape on the Singularity Dominated Zone,” Special Tech. Publication 791, Amer. Soc. for Test. Mat., 13–123 (1983).
Irwin, G.R. andKies, J.A., “Critical Energy Rate Analysis of Fracture Strength,”Welding J.,33 (4),193s-198s (1954).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Moore, A.J., Tyrer, J.R. Phase-stepped ESPI and moiré interferometry for measuring stress-intensity factor andJ integral. Experimental Mechanics 35, 306–314 (1995). https://doi.org/10.1007/BF02317539
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02317539