Abstract
Three methods of modeling a chemical reaction in the combustion of ethanol injected into the boundary layer through a porous plate are compared. In calculations of the average velocity and temperature and also heat-transfer coefficients, simple models of combustion are shown to be close in accuracy to a model that takes into complete account the kinetics of all reactions occurring during combustion. Simple models fail to determine the composition of reaction products, and it is necessary to take into account the formation rate of each substance entrained in combustion.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
B. F. Boyarshinov, E. P. Volchkov, V. I. Terekhov, and S. A. Shutov, “Turbulent boundary layer with the injection of reactive materials,”Fiz. Goreniya Vzryva,17, No. 6, 21–28 (1981).
D. Miloyevich, “Calculation of gas-fuel combustion in a cylindrical eddy chamber,” in:High Temperature Flows and Heat Exchange [in Russian], Inst. of Thermal Physics, Sib. Div., Acad. of Sci. of the USSR, Novosibirsk (1990), pp. 106–122.
É. P. Volkov and N. Yu. Kudryavtsev, “Modeling of the formation of nitrogen oxides in a turbulent diffusion flame,”Inzh.-Fiz. Zh.,56, No. 6, 885–893 (1989).
P. Hutchinson, E. E. Khalil, J. H. Whitelaw, and G. Wigly, “The calculation of furnace flow properties and their experimental verification,”Trans. ASME, Ser. C,98, 276–283 (1976).
W. P. Jones and B. E. Launder, “The prediction of laminarization with a 2-equation model of turbulence,”Int. J. Heat Mass Transfer,15, 301–314 (1972).
P. A. Libby and F. Williams (eds.),Turbulent Reacting Flows, Springer-Verlag, Berlin-Heidelberg-New York (1980).
C. K. Westbrook and F. L. Dryer, “Chemical kinetic modeling of hydrocarbon combustion,”Prog. Energy Combust. Sci.,10, 1–57 (1984).
S. Patankar and D. Spaulding,Heat and Mass Transfer in Boundary Layers, Morgan-Grampian, London (1967).
B. F. Boyarhinov, É. P. Volchkov, and V. I. Terekhov, “Flow structure and heat and mass transfer in a boundary layer with a combustion front,” In:Transfer Processes in Single- and Two-Phase Media [in Russian], Inst. of Thermal Physics, Sib. Div., Acad. of Sci. of the USSR, Novosibirsk (1986), pp. 88–97.
B. F. Boyarshinov, Heat and Mass Transfer in a Boundary Layer in Ethanol Evaporation and Combustion, Candidate's Dissertation, Novosibirsk (1988).
Author information
Authors and Affiliations
Additional information
Translated from Fizika Goreniya i Vzryva, Vol. 32, No. 4, pp. 37–42, July–August, 1996.
Rights and permissions
About this article
Cite this article
Volchkov, É.P., Dvornikov, N.A. & Perepechko, L.N. Comparison of different methods of modeling turbulent combustion in a boundary layer. Combust Explos Shock Waves 32, 390–394 (1996). https://doi.org/10.1007/BF01998484
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01998484