Abstract
An exact solution is given for the bending of uniformly loaded rectangular cantilever plates by using the idea of generalized simply supported edge together with the method of superposition. As illustrative examples, a square plate and a rectangular plate with the ratio of the clamped edge to the neighbouring free edge equal to two are solved numerically. The results are compared with those obtained from approximate methods to confirm the validity of the method presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Holl, D. L., Cantilever Plate with Concentrated Edge Load,Journal of Applied Mechanics, 4, (1937).
Nowaski, W., A Contribution to the Theory of Plates and Shells. Institute of Mechanics, Academia Sinica, 1956.
Nach, W. A., Several Approximate Analysis of the Bending of a Rectangular Cantilever Plate by Uniform Normal Pressure.Journal of Applied Mechanics. 19, 1 (1952).
Plass, H. J., Games Jr. J. H., Newson C. D., Application of Reissner's Variational Principle to Cantilever Plate Deflection and Vibration Problems.Journal of Applied Mechanics, 29, (1962).
Shu Teh-kien, Shih Tsun-tong, Variational Principle of Elastic Thin Plates and its Application.Journal of the Peking Aeronautics Institute, 1957.
Chang Fo-van, Bending of Rectangular Cantilever Plate (with a concentrated load at the free edge),Journal of Tsing-hua University, 2, Vol. 19, 1979.
Chang Fo-van, Elastic Thin Plates. Scientific Publishing House, Peking, China, 1965.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fo-van, C. Bending of uniformly cantilever rectangular plates. Appl Math Mech 1, 371–383 (1980). https://doi.org/10.1007/BF01874559
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01874559