Abstract
Beams and circular plates on elastic foundations are considered. In some cases, additional elastic supports are present. The stiffness distribution of the foundation is designed so that the pressure on the foundation is uniform. Sometimes the depth of the beam or plate is also varied, with either a piecewise-constant sandwich or solid cross-section, and a global measure of the deflection is minimized. The total stiffness of the foundation and supports is specified, as well as the volume of the structure. In one type of problem, the edges of the structure are displaced downwards; in the other examples, a downward load is applied. Types of loads include a concentrated central load, a uniform load and a parabolic load. The uniform foundation pressure for the resulting design is often substantially lower than the maximum pressure for a corresponding uniform beam or plate on an elastic foundation with uniform stiffness.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Åkesson, B.; Olhoff, N. 1988: Minimum stiffness of optimally located supports for maximum value of beam eigenfrequencies.J. Sound Vib. 120, 457–463
Dems, K.; Plaut, R.H.; Banach, A.S.; Johnson, L.W. 1987: Optimization of elastic foundation for minimum beam deflection.Int. J. Solids Struct. 23, 1551–1562
Pičuga, A. 1988: Optimality conditions for multiple loaded structures — integrating control and finite element method. In: Rozvany, G.I.N.; Karihaloo, B.L. (eds.)Structural optimization. Dordrecht: Kluwer
Plaut, R.H. 1987: Optimal beam and plate foundations for minimum compliance.J. Appl. Mech. 54, 255–257
Plaut, R.H. 1989: Simultaneous optimization of beams and their elastic foundations for minimum compliance.J. Appl. Mech. 56, 629–632
Rozvany, G.I N. 1989:Structural design via optimality criteria: the Prager approach. Dordrecht: Kluwer
Shin, Y.S.; Haftka, R.T.; Plaut, R.H. 1988: Simultaneous analysis and design for eigenvalue maximization.AIAA J. 26, 738–744
Shin, Y.S.; Haftka, R.T.; Watson, L.T.; Plaut, R.H. 1988: Tracing structural optima as a function of available resources by a homotopy method.Comp. Meth. Appl. Mech. Engrg. 70, 151–164
Szelag, D.; Mróz, Z. 1978: Optimal design of elastic beams with unspecified support conditions.Zeit. ang. Math. Mech. 58, 501–510
Taylor, J.E.; Bendsøe, M.P. 1984: An interpretation for minmax structural design problems including a method for relaxing constraints.Int. J. Solids Struct. 20, 301–314
Author information
Authors and Affiliations
Additional information
Virginia Polytechnic Institute and State University, August–December 1989
Rights and permissions
About this article
Cite this article
Dems, K., Plaut, R.H. Design of beams, plates and their elastic foundations for uniform foundation pressure. Structural Optimization 2, 213–222 (1990). https://doi.org/10.1007/BF01748226
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01748226