Abstract
Topology optimization of continuum structures is often reduced to a material distribution problem. Up to now this optimization problem has been solved following a rigid scheme. A design space is parametrized by design patches, which are fixed during the optimization process and are identical to the finite element discretization. The structural layout is determined, whether or not there is material in the design patches. Since many design patches are necessary to describe approximately the structural layout, this procedure leads to a large number of optimization variables. Furthermore, due to a lack of clearness and smoothness, the results obtained can often only be used as a conceptual design idea.
To overcome these shortcomings adaptive techniques, which decrease the number of optimization variables and generate smooth results, are introduced. First, the use of pure mesh refinement in topology optimization is discussed. Since this technique still leads to unsatisfactory results, a new method is proposed that adapts the effective design space of each design cycle to the present material distribution. Since the effective design space is approximated by cubic or Bézier splines, this procedure does not only decrease the number of design variables and lead to smooth results, but can be directly joined to conventional shape optimization. With examples for maximum stiffness problems of elastic structures the quality of the proposed techniques is demonstrated.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bendsøe, M.P. 1989: Optimal shape design as a material distribution problem.Struct. Optim. 1, 193–202
Bendsøe, M.P.; Kikuchi, N. 1988: Generating optimal topologies in structural design using a homogenization method.Comp. Meth. Appl. Mech. Eng. 71, 197–224
Bendsøe, M.P.; Mota Soares, C.P. (eds.) 1993:Topology design of structures. Dordrecht: Kluwer
Bletzinger, K.-U.; Kimmich, S.; Ramm, E. 1991: Efficient modeling in shape optimal design.Comp. Syst. Engrg. 2, 483–495
Braibant, V.; Fleury, C. 1986: Shape optimal design and CAD oriented formulation.Engineering with Computers 1, 193–204
Díaz, A.; Kikuchi, N. 1992: Solutions to shape and topology eigenvalue optimization problems using a homogenization method.Int. J. Num. Meth. Eng. 35, 1487–1502
Eschenauer, H.A.; Schumacher, A.; Vietor, T. 1993: Decision makings for initial designs made of advanced materials. In: Bendsøe, M.P.; Mota Soares, C.A. (eds.)Topology design of structures, pp. 469–480. Dordrecht: Kluwer
Farin, G.E. 1988:Curves and surfaces for computer aided geometric design. San Diego: Academic Press
Hinton, E.; Sienz, J. 1994: Aspects of adapted finite element analysis and structural optimization. In: Topping, B.H.V.; Papadrakakis, M. (eds.)Advances in structural optimization, pp. 1–25. Edinburgh: Civil-Comp Ltd.
Kikuchi, N. 1992:Generalized layout optimization of elastic structures by the homogenization method (lecture notes). Ann Arbor: University of Michigan
Kohn, R.V.; Strang, G. 1986: Optimal design and relaxation of variational problems.Comm. Pure Appl. Math. 39, 1–52 (Part I), 139–182 (Part II), 353–377 (Part III)
Maute, K.; Ramm, E. 1994: Topology optimization of plate and shell structures. In: Abel, J.F.; Leonard, J.W.; Penalba, C.U. (eds.)Spatial, lattice and tension structures (Proc. IASS-ASCE Int. Symp.), pp. 946–955. New York: ASCE
Mlejnek, H.P.; Jehle, U.; Schirrmacher, R. 1991: Some approaches for shape finding in optimal structural design.Lecture Notes in Engineering 63, pp. 59–70. Berlin, Heidelberg, New York: Springer
Neves, M.M.; Guedes, J.M.; Rodrigues, H.C. 1993: Topology optimization of elastic 2D structures with critical load constraints. In: Herskovits, J. (ed.)Proc. Cong. on Optimal Design of Structural Systems, pp. 119–128. Rio de Janeiro: COPPE
Olhoff, N.; Bendsøe, M.P.; Rasmussen, J. 1991: On CADintegrated structural topology and design optimization.Comp. Meth. Appl. Mech. Eng. 89, 259–279
Peraire, J.; Vahdati, M.; Morgan, K.; Zienkiewicz, O.C. 1987: Adaptive remeshing for compressible flow computations.J. Comp. Phys. 72, 449–466
Ramm, E.; Maute, K. 1994: Topology optimization - a general tool in structural design. In: Mang, H.; Bicancic, N.; de Borst, R. (eds.)Computational modeling of concrete structures, pp. 805–824. Swansea: Pineridge Press Ltd.
Rosen, D.W.; Grosse, I.R. 1992: A feature based shape optimization technique for the configuration and parametric design of flat plates.Engineering with Computers 8, 81–91
Rozvany, G.I.N.; Bendsøe, M.P.; Kirsch, U. 1995: Layout optimization of structures.Appl. Mech. Rev. 48, 41–118
Rozvany, G.I.N.; Zhou, M.; Birker, T. 1992: Generalized shape optimization without homogenization.Struct. Optim. 4, 250–252
Rozvany, G.I.N.; Zhou, M.; Birker, T.; Sigmund, O. 1993: Topology optimization using iterative continuum-type optimality criteria (COC) methods for discretized systems. In: Bendsøe, M.P.; Mota Soares, C.A. (eds.)Topology design of structures, pp. 273–286. Dordrecht: Kluwer
Sanchez-Palencia, E. 1980:Non-homogenous media and vibration theory. Berlin, Heidelberg, New York: Springer
Schittkowski, K. 1981: The nonlinear programming method of Wilson, Han and Powell with an augmented Lagrangian type line search.Numerische Mathematik 38, 83–114
Suzuki, K.; Kikuchi, N. 1992: Generalized layout of threedimensional shell structures. In: Field, D.A.; Komkov, V. (eds.)Geometric aspects of industrial design, pp. 62–88. Philadelphia: SIAM
Tenek, L.H.; Hagiwara, I. 1993: Static and vibrational shape and topology optimization using homogenization and mathematical programming.Comp. Meth. Appl. Mech. Eng. 109, 143–154
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Maute, K., Ramm, E. Adaptive topology optimization. Structural Optimization 10, 100–112 (1995). https://doi.org/10.1007/BF01743537
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01743537