Abstract
The effects of sodium chloride, sodium sulfate, and alum (aluminum sulfate) on the performance of a cationic polyacrylamide flocculant in a papermaking suspension consisting of bleached (hardwood: softwood, 50∶50) kraft wood-pulp fibres and anatase (TiO2) were investigated. Sodium chloride and sodium sulfate, 1×10−5 to 1×10−2 M, in the presence of polymer, caused negligible changes in the electrophoretic mobility of the TiO2 and in the first-pass retention of TiO2 (heteroflocculation of TiO2 and fibres). Alum at concentrations from 1×10−5 to 1×10−4 M at pH 4.0 and 4.5 increased retention with polymer; higher alum concentrations resulted in lower retentions. At pH 4.0 the electrophoretic mobility of the TiO2 was positive over the entire range of alum concentrations investigated (1×10−5−3.2×10−3 M) whereas at pH 4.5 the mobility was negative at 1×10−5 M alum and charge reversal was observed at about 4×10−5 M alum.
The intrinsic viscosity of the cationic polyacrylamide was decreased by the addition of alum, sodium chloride or sodium sulfate. The effect of alum on the polymer conformation appeared to be that of the non-specific interaction of sulfate ions with a cationic polyelectrolyte.
Retention results are discussed in terms of the colloidal stability of TiO2, the adsorption of polyacrylamide on TiO2 and the conformation of adsorbed polymer.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Date, J. L., J. M. Shute, Tappi42, 824 (1959).
Linke, W. F., Tappi45, 326 (1962).
Klass, C. P., A. J. Sharp, J. M. Urick, in: “Retention of Fine Solids During Paper Manufacture”, Tappi CA Report No. 57 (1975).
Lindstrom, T., C. Soremark, J. Colloid Interface Sci.55, 305 (1976).
Lindstrom, T., C. Soremark, L. Eklund, Trans. Tech. Sect. CPPA, (12) TR114, (1977).
Jaycock, M. J., J. L. Pearson, J. Colloid Interface Sci.55, 181 (1976).
Jaycock, M. J., J. L. Pearson, J. Appl. Chem. Biotechnol.25, 815 (1975).
Nicke, R., H. J. Hartmann, Zellstoff Papier25, 360 (1976).
Moore, E. E., Tappi58, 99 (1975).
Watts, J. E., R. H. Windhager, Preprints of the 25th Plastics Paper Conference, Syracuse, N. Y., 53 (1970).
Guender, W., W. Auhorn, Paper World Res. Devt., 20 (1975).
Matijevic, E., G. E. Janauer, M. Kerker, J. Colloid Interface Sci.19, 333 (1964).
Britt, K. W., J. E. Unbehend, Tappi59, 67 (1976).
Pelton, R. H., L. H. Allen, H. M. Nugent, Pulp Paper Can.80, 125 (1979).
Shawki, S. M., A. E. Hamielec, J. Appl. Polym. Sci.23, 3323 (1979).
Brill, H. C., F. L. Hecklau, Tappi43 229A (1960).
Tanford, C., in: “Physical Chemistry of Macromolecules”, Wiley, New York, Chapter 7 (1961).
La Mer, V. K., T. W. Healy, Rev. of Pure Appl. Chem.13, 112 (1963).
Collinson, E., F. S. Dainton, G. S. McNaughton, Trans. Faraday Soc.53, 489 (1957).
Verwey, E. J. W., J. Th. G. Overbeek, in: “Theory of the Stability of Lyophobic Colloids”, Elsevier, Amsterdam (1948).
Pelton, R. H., Colloids and Surfaces2, 277 (1981).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pelton, R.H., Allen, L.H. The effects of some electrolytes on flocculation with a cationic polyacrylamide. Colloid & Polymer Sci 261, 485–492 (1983). https://doi.org/10.1007/BF01419832
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01419832