Summary
Arbitrarily nonlinear stress-strain behaviour in both shear and peel for adhesive are utilised to formulate two coupled nonlinear governing equations for an adhesive-adherend sandwich of single-lap type. For a balanced adhesive-adherend sandwich, the two equations can be integrated, and simple formulas for bond strength are developed for characterising pure shear, peel and mixed failure in adhesive. These formulas define the bond strength in terms of the maximum strain energy density in the adhesive. It is shown that the product of the adhesive strain energy density and the adhesive thickness is equal to the energy release rateJ of mode I, mode II and mixed fracture.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Goland, M., Reissner, E.: The stresses in cemented joints. ASME J. Appl. Mech.11, A17–27 (1944).
Hart-Smith, L. J.: Adhesive-bonded single lap joints. Langley Research Center, NASA CR-112236, Hampton, Virginia, 1973.
Oplinger, D. W.: A layered beam theory for single lap joints. Army Materials Technology Laboratory Report MTL TR91-23, 1991.
Tsai, M. Y., Morton, J.: An evaluation of analytical and numerical solutions to the single-lap joints. Int. J. Solids Struct.31, 2537–2563 (1994).
Chen, D., Cheng, S.: An analysis of adhesive-bonded single-lap joints. ASME J. Appl. Mech.50, 109–115 (1983).
Crocombe, A. D., Adams, R. D.: Influence of the spew fillet and other parameters on the stress distribution in the single-lap joints. J. Adhesion13, 141–155 (1981).
Harris, J. A., Adams, R. D.: Strength prediction of bonded single-lap joints by nonlinear finite element methods. Int. J. Adhesion Adhesives4, 65–78 (1984).
Ojalvo, I. U.: Eidinoff, H.: Bond thickness effects upon stresses in single-lap adhesive joints. AIAA J.16, 204–211 (1978).
Adams, R. D.: Strength predictions for lap joints, especially with composite adherends. A review. J. Adhesion30, 219–242 (1989).
Bigwood, D. A., Crocombe, A. D.: Elastic analysis and engineering design formulae for bonded joints. Int. J. Adhesion Adhesives9, 229–242 (1989).
Carpenter, W. C.: A comparison of numerous lap joint theories for adhesively bonded joints. J. Adhesion35, 55–73 (1991).
Crocombe, A. D.: Global yielding as a failure criterion for bonded joints. Int. J. Adhesion Adhesives9, 145–153 (1989).
Adams, R. D., Wake, W. C.: Structural adhesive joints in engineering, London: Elsevier 1984.
Hamaush, S. A., Ahmed, S. H.: Fracture energy release rate of adhesive joints. Int. J. Adhesion Adhesives9, 171–178 (1989).
Ripling, E. J., Mostovoy, S., Corten, H.: Fracture mechanics: a tool for evaluating structural adhesives. J. Adhesion3, 107–123 (1971).
Anderson, G. P., Brinton, S. H., Ninow, K. J., DeVries, K. L.: A fracture mechanics approach to predicting bond strength. In: Advances in adhesively bonded joints (Mall, S., Leichti, K. M., Vinson, J. R., eds.), pp. 93–101. New York: ASME 1988.
Fernlund, G., Spelt, J. K.: Failure load prediction: I. analytical method. Int. J. Adhesion Adhesives11, 213–220 (1991).
Fernlund, G., Spelt, J. K.: Failure load prediction: II. experimental results. Int. J. Adhesion Adhesives11, 221–227 (1991).
Fernlund, G., Papini, M., McCammond, D., Spelt, J. K.: Fracture load predictions for adhesive joints. Comp. Sci. Techn.51, 587–600 (1994).
Fernlund, G., Spelt, J. K.: Mixed mode energy release rates for adhesively bonded beam specimens. J. Comp. Tech. Res.16, 234–243 (1994).
Fernlund, G., Spelt, J. K.: Mixed-mode fracture characterisation of adhesive joints. Comp. Sci. Techn.50, 441–449 (1994).
Papini, G., Fernlund, G., Spelt, J. K.: The effect of geometry on the fracture of adhesive joints. Int. J. Adhesion Adhesives14, 5–13 (1994).
Suo, Z., Hutchinson, J. W.: Steady-state cracking in brittle substrates beneath adherent film.Int. J. Solids Struct.25, 1337–1353 (1989).
Williams, J. G.: On the calculation of energy release rates for cracked laminates. Int. J. Fracture36, 101–119 (1988).
Krieger, R. B., Jr.: Stress analysis concepts for adhesive bonding of aircraft primary structures. In: Adhesively bonded joints: testing,analysis and design (Johnson, W. S., ed.), pp. 264–275. Philadelphia: American Society for Testing and Materials 1988.
Chai, H.: Observation of deformation and damage at the tip of cracks in adhesive bonds loaded in shear and assessment of a criterion for fracture. Int. J. Fracture60, 311–326 (1993).
Edde, F., Verreman, Y.: On the fracture parameters in a clamped cracked lap shear adhesive joint. Int. J. Adhesion Adhesives12, 43–48 (1992).
Carlsson, L. A., Gillespie, J. W., Pipes, R. B.: On the analysis and design of the end notched flexture (ENF) specimen for mode II testing. J. Comp. Mat.120, 594–604 (1986).
Russell, A. J., Street, K. N.: Factors affecting the interlaminar fracture energy of graphite/epoxy laminates, pp. 279. Proceedings of ICCM IV, Tokyo, 1982.
Tong, L.: Bond shear strength for adhesive bonded double lap joints. Int. J. Solids Struct.31, 2919–2931 (1994).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tong, L. Bond strength for adhesive-bonded single-lap joints. Acta Mechanica 117, 101–113 (1996). https://doi.org/10.1007/BF01181040
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01181040