Summary
The paper describes theoretical andin situ studies of tunnel deformation in longwall coal mining. It develops a method to predict tunnel convergence profiles from the faceline in longwall mining. The method accounts for the effect of panel width, extracted seam height, deformation moduli of the goaf material and coal pillar, depth of cover,in situ structural defects, tunnel shape and tunnel size in addition to the strength characteristics of surrounding strata. The analytical technique has been validated by reference toin-situ deformation measurements in 26 face-access tunnels in Cape Breton Coalfield mines. Based on this method a series of vertical convergence profiles for different depths and extracted panel widths have been presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Anon (1982) West German Technique — decision aids for Gate roads planning, taking into account the aspects of rock mechanics and support techniques, recommended operating procedure for coal mines, No. 203, Verlay Glukauf, Essen, p. 60.
Barlow, J.P. and Kaiser, P.K. (1987) Interpretation of tunnel convergence measurements, inProceedings of the 6th Congress of the ISRM, Montreal, Vol. 2, pp. 787–92.
Bishop, A.W. (1972) Shear strength parameters for undisturbed and remolded soil specimens, inProceedings of the Roscoe Memorial Symposium: Stress-Strain Behaviour of Soils, (Edited by Parry, R.H.G.), Foulis, Henley-on-Thames, pp. 3–58.
Blades, M.J. and Whittaker, B.N. (1972)Longwall layouts and roadway design for effective strata control in advance and retreat mining, The Institution of Mining Engineers, 12 p.
Bray, J. W. (1967) A study of jointed and fractured rocks, part II, theory of limiting equilibrium,Rock Mechanics and Engineering Geology 4, 197–216.
Brown, E.T., Bray, J.W., Ladanyi, B. and Hoek, E. (1983) Ground response curves for rock tunnels,Journal of Geotechnical Engineering Division, ASCE 109, 15–39.
Fenner, R. (1936) A study of ground pressures,Cluckauf 74, 681–95, 705–15.
Guenot, A., Panet, M., and Sulem, J. (1985) A new aspect in tunnel closure interpretation, inProceedings of the 26th U.S. Symposium on Rock Mechanics, Rapid City, pp. 455–60.
Hobbs, D.W. (1968) The behaviour of broken rock under triaxial compressions,Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 7, 125–48.
Hoek, E. and Brown, E.T. (1980)Underground Excavation in Rock, Institution of Mining and Metallurgy, London.
Jaeger, J.C. and Cook, N.G.W. (1979)Fundamental of Rock Mechanics, Chapman and Hall, London, 593 p.
Kastener, H. (1949)The Statik des Tunnel und Stollenbaues, Springer Verlag, Berlin/Gottingen/Heidelberg.
Krauland, N. (1971)Design of Tunnels from the Rock Mechanics Point of View, Rock Mechanics Division, Council for Scientific and Industrial Research, Pretoria.
Kulhawy, F.H., Rose, D. (1979) Predicted Behaviour of the Marta Twin Tunnels and Research Chamber, inProceedings of the 20th U.S. Symposium on Rock Mechanics, Austin, pp. 95–108.
Ladanyi, B. (1974) Use of the long-term strength concept in the determination of ground pressure on tunnel linings, Advances in Rock Mechanics, inProceedings of the 3rd Congress of the International Society of Rock Mechanics, Denver, pp. 1150–56.
Majdi, A., Hassani, F.P., Cain, P. (1986) The influence of design parameters on tunnel closure in the Sydney Coal field,Proceedings of the 88th Annual General Meeting of CIM, Montreal, 36 p.
Majdi, A. (1988) A study of tunnel stability and barrier pillar design in Mines of the Cape Breton Coalfield, Ph.D. Thesis, McGill University, 310 p.
Muir-Wood, A.M. (1979) Some practical aspects of conceptual models in tunneling, inProceedings of the 4th Congress of the ISRM, Montreux,1, 275–8.
Panet, M. (1979) Time-dependent deformations in underground works, inProceedings of the 4th Congress of the ISRM, Montreux,1, 279–89.
Priest, S.D. and Hudson, J.A. (1976) Discontinuity spacings in rock,Int. J. Rock Mech. Min. Sci,13, 135–48.
Santarelli, F.J. and Brown, E.T. (1987) Performance of deep wellbores in rock with a confining pressure-dependent elastic modulus, inProceedings of the 6th Congress of the ISRM, Montreal,2, 1217–22.
Sulem, J., Panet, M. and Guenot, A. (1987a) Closure analysis in deep tunnels,Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 24, 145–54.
Sulem, J., Panet, M. and Guenot, A. (1987b) An analytical solution for time-dependent displacements in a circular tunnel,Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 24, 155–64.
Whittaker, B.N., Hassani, F.P. and White, M.J. (1983) Instrumentation for stability evaluation of coal mine tunnels and excavation, inProceedings of the International Symposium on Field Measurements in Geomechanics,2, 1257–66.
Wilson, A.H. (1980) A method of estimating the closure and strength of lining required in drivages surrounded by a yield zone,Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 17, 349–55.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Majdi, A., Hassani, F.P. Access tunnel convergence prediction in longwall coal mining. International Journal of Mining and Geological Engineering 7, 283–300 (1989). https://doi.org/10.1007/BF00896593
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00896593