Article PDF
Avoid common mistakes on your manuscript.
Literature Cited
A. S. Avetisyan, “Stress concentration near a rhombic aperture for a physically nonlinear material,” Prikl. Mekh.,2, No. 10, 128–133 (1966).
A. S. Avetisyan, “Stress concentration near a rhombic aperture in an isotropic, physically nonlinear plate under pure shear,” Prikl. Mekh.,5, No. 3, 120–124 (1969).
A. S. Avetisyan, “Study of the stress concentration near curved apertures in physically nonlinear plates,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Erevan (1970).
A. S. Avetisyan, M. A. Babaev, and I. A. Tsurpal, “Effect of physical nonlinearity, contour curvature, and rigidity of the support on the stress in a massif with noncircular horizontal shafts,” in: Mechanics Problems of Rocks [in Russian], Nauka, Moscow (1971), pp. 192–190.
S. D. Akbarov, “On the stress in a general curved boundary between two elastic media (plane deformation),” Trans. of Math. and Mechanics Students, for the 60th Anniversary of the USSR, Baku (1983), pp. 15–19.
S. D. Akbarov, “On the stress in an infinite viscoelastic body fortified by a curved layer of sealant,” Trans. 10th Conf. of Stud. of the Inst. of Mechanics, Academy of Sciences of the Ukrainian SSR, Ch. 1, pp. 2–7, Kiev (1984); in: VINITI, July 30, 1984, No. 5535-84.
S. D. Akbarov, “On a method of solving problems in the mechanics of composite materials with distorted viscoelastic layers,” Prikl. Mekh.,21, No. 3, 14–19 (1985).
S. D. Akbarov, “On the normal stress in a fibrous composite material with structural distortions having a small concentration of sealant,” Prikl. Mekh.,21, No. 11, 50–55 (1985).
S. D. Akbarov, “On the stress in a fibrous viscoelastic composite material with structural distortions containing a small concentration of fibers,” Prikl. Mekh.,22, No. 6, 13–21 (1986).
S. D. Akbarov and A. N. Guz', “On a method of solving problems in the mechanics of composite materials with distorted layers,” Prikl. Mekh.,20, No. 4, 3–9 (1984).
S. D. Akbarov and A. N. Guz', “On a method of solving problems in the mechanics of fibrous materials with structural distortions,” Prikl. Mekh.,20, No. 9, 3–12 (1984).
S. D. Akbarov and A. N. Guz', “On the stress in a composite material with distorted layers and a small concentration of sealant,” Mekh. Kompozitn. Mater., No. 6, 990–996 (1984).
S. D. Akbarov and A. N. Guz', “Model of a piecewise-homogeneous body in the mechanics of layered composite materials with small-scale distortions,” Prikl. Mekh.,21, No. 4, 5–12 (1985).
S. D. Akbarov and A. N. Guz', “On the stress in a fibrous composite material with structural distortions and a small concentration of fibers,” Prikl. Mekh.,21, No. 6, 37–44 (1985).
S. N. Babyuk and I. A. Tsurpal, “Nonlinear problem on the stress concentration for a plate with curved apertures,” Izv. Arm. SSR Mekh.,23, No. 6, 24–31 (1970).
N. V. Banichuk, “Determination of the shape of curved cracks using the method of a small parameter,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 2, 130–137 (1970).
G. E. Belashevskii, “Stress concentration in a circular cylindrical shell with a curved aperture,” Tr. Kuibyshev. Aviation Inst., No. 48, 41–50 (1971).
G. E. Belashevskii, “Stress distribution in a cylindrical shell with a noncircular aperture or rigid inclusion,” Calculation of Three-Dimensional Systems in Engineering Mechanics [in Russian], Saratov Univ. (1972), pp. 98–99.
N. I. Belozerov and I. I. Dolgova, “On the diffraction of cylindrical waves by a cylindrical shell of arbitrary cross section,” Akust. Zh.,17, No. 3, 457–459 (1971).
N. M. Bloshko, “On the stress of a transversely isotropic corrugated cylinder of finite length,” Prikl. Mekh.,19, No. 12, 38–43 (1983).
N. M. Bloshko, “Axisymmetric stress state of an elastic cylinder of finite length with circular grooves,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1984).
N. M. Bloshko and Yu. N. Nemish, “Elastic equilibrium of a transversely isotropic solid cylinder with perturbed surfaces,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 4, 93–99 (1984).
E. V. Bruyatskii, “Approximate method of solving Oseen boundary-value problems for a cylinder of arbitrary shape,” Prikl. Mekh.,2, No. 10, 121–127 (1966).
E. V. Bruyatskii, “Application of the Vekua method to the Oseen equations,” Prikl. Mekh.,2, No. 5, 121–127 (1966).
E. V. Bruyatskii, “Study of the drag of poorly streamlined bodies at small Reynolds numbers,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1967).
Ya. I. Burak, Ya. P. Romanchuk, and B. M. Trits, “Optimization of temperature and stress fields in a doubly-connected plate,” Prikl. Mekh.,22, No. 1, 68–73 (1986).
M. Van Dyke, Perturbation Methods in Fluid Mechanics, Academic Press, New York (1964).
L. M. Vardanyan, “Stress concentration near an aperture of arbitrary shape in a nonlinear elastic plate,” Prikl. Mekh.,6, No. 5, 125–130 (1970).
L. M. Vardanyan, “Stress concentration near an aperture of arbitrary shape in an isotropic physically nonlinear plate under a pure shear,” Izv. Akad. Nauk Arm. SSR, Mekh.,23, No. 1, 28–65 (1970).
L. M. Vardanyan, “Stress concentration near an oval aperture in an elastically nonlinear plate,” Kontsentratsiya Napryazhenii, Issue 3, 28–31 (1971).
L. M. Vardanyan, “Physically nonlinear problems for the stress concentration in singly connected and multiply connected regions,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Erevan (1971).
L. M. Vardanyan and I. A. Tsurpal, “Stress concentration for singly connected and multiply connected regions for a physically nonlinear material,” Tr. 7th All-Union Conf. on the Theory of Shells and Plates, Dnepropetrovsk, 1969 [in Russian], Nauka, Moscow (1970), pp. 137–141.
S. A. Vorob'ev, “Nature of the asymptotic radiation field emitted by a noncircular cylindrical shell in a fluid,” Central Scientific-Research Institute (TsNII), “Rumb” (1983); manuscript in VINITI, No. 1804.
S. A. Vorob'ev, “Solution of dynamical problems for noncircular cylindrical shells in a fluid,” Dokl. Akad. Nauk Ukr. SSR, Ser. A, No. 5, 28–32 (1983).
S. A. Vorob'ev, “Dynamics of noncircular cylindrical shells in a fluid,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1983).
S. A. Vorob'ev and A. N. Guz', “Emission of sound by noncircular cylindrical shells in a fluid,” Prikl. Mekh.,19, No. 8, 3–10 (1983).
I. I. Vorovich, V. M. Aleksandrov, and V. A. Babeshko, Nonclassical Mixed Problems in the Theory of Elasticity [in Russian], Nauka, Moscow (1974).
S. A. Goloborod'ko, “Stress near a square aperture with rounded corners in a cylindrical shell,” Prikl. Mekh.,1, No. 10, 21–29 (1965).
G. P. Grechka and D. I. Chernopiskii, “Stress concentration in nearly spherical cavities,” Prikl. Mekh.,19, No. 2, 29–32 (1983).
O. M. Guz', Prikl. Mekh.,8, No. 6, 605–612 (1962).
A. N. Guz', “Approximate solutions for the stress concentration near apertures in isotropic and orthotropic shells,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1962).
O. M. Guz', “Stress concentration near an elliptical aperture of small eccentricity in a cylindrical shell,” Dop. Akad. Nauk Ukr. RSR, No. 10, 1326–1330 (1963).
O. M. Guz', Prikl. Mekh.,9, No. 1, 103–108 (1963).
A. N. Guz', “Stress concentration near curved apertures on the lateral surface of a circular cylinder,” Inzh. Zh., No. 2, 360–364 (1964).
O. M. Guz', “Torsion of a cylindrical shell weakened by a square aperture,” Dop. Akad. Ukr. RSR, No. 1, 41–44 (1965).
O. M. Guz', “Stress concentration near a square aperture in a spherical shell,” Dop. Akad. Nauk Ukr. RSR, No. 9, 1145–1150 (1964).
A. N. Guz', “Equilibrium of a spherical shell weakened by an aperture in the shape of an equilateral triangle,” Prikl. Mekh.,1, No. 3, 35–40 (1965).
O. M. Guz', “Torsion of a cylindrical shell weakened by an aperture in the shape of an equilateral triangle,” Dop. Akad. Nauk Ukr. RSR, No. 4, 472–476 (1964).
A. N. Guz', “Thin elastic shell weakened by apertures,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Kiev (1965).
A. N. Guz', “Stress concentration near apertures in thin shells (Review),” Prikl. Mekh.,5, No. 3, 1–17 (1969).
A. N. Guz', “Stress concentration near apertures (Review),” Tr. 7th All-Union Conf. on the Theory of Plates and Shells [in Russian], Nauka, Moscow (1970), pp. 788–794.
A. N. Guz', Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 4, 352–355 (1970).
A. N. Guz', “On the diffraction of waves by finite bodies of revolution,” Prikl. Mekh.,9, No. 7, 10–18 (1973).
A. N. Guz', “On the propagation and diffraction of waves in bodies with noncircular cylindrical boundaries,” Prikl. Mekh.,9, No. 9, 3–11 (1973).
A. N. Guz', “On the continuum theory of composite materials with small-scale structural distortions,” Dokl. Akad. Nauk SSSR,208, No. 2, 307–313 (1983).
A. N. Guz', “Theory of vibration of composite materials with small-scale structural distortions,” Dokl. Akad. Nauk SSSR,270, No. 5, 1078–1081 (1983).
A. N. Guz', “Mechanics of composite materials with small-scale structural distortions,” Prikl. Mekh.,19, No. 5, 3–15 (1983).
A. N. Guz', “Quasiuniform state in composite materials with small-scale structural distortions,” Prikl. Mekh.,19, No. 6, 3–14 (1983).
G. V. Guz', “On a variant of the method of small parameter in a two-dimensional problem of the thermoelasticity of a cylindrically orthotropic body,” Mat. Fiz., No. 29, 82–87 (1981).
O. M. Guz' and S. O. Goloborod'ko, Prikl. Mekh.,10, No. 6, 595–599 (1964).
A. N. Guz' and V. T. Golovchan, Diffraction of Elastic Waves in Multiply Connected Bodies [in Russian], Naukova Dumka, Kiev (1972).
A. N. Guz', R. Yu. Kerimov, and S. Yu. Kerimov, “On the diffraction of torsional waves by finite bodies of revolution,” Izv. Akad. Nauk Azer. SSR, Ser. Fiz.-Tekh. Mat. Nauk, No. 2, 144–149 (1973).
A. N. Guz', V. D. Kubenko, and M. A. Cherevko, Diffraction of Elastic Waves [in Russian], Naukova Dumka, Kiev (1978).
A. N. Guz', P. Z. Lugovoi, and N. A. Shul'ga, Conical Shells Weakened by Apertures [in Russian], Naukova Dumka, Kiev (1976).
A. N. Guz' and Yu. N. Nemish, Perturbation Methods in Three-Dimensional Elastic Problems [in Russian], Vishchaya Shkola, Kiev (1982).
A. N. Guz' and Yu. N. Nemish, Statics of Elastic Bodies of Noncanonical Shape [in Russian], Naukova Dumka, Kiev (1984) (Three-Dimensional Problems of the Theory of Elasticity and Plasticity [in Russian], 6 vols., Vol. 2).
A. N. Guz' and G. N. Savin, “On the stress near curved fortified apertures in shells,” Inzh. Zh.,5, No. 1, 103–109 (1965).
A. N. Guz', G. N. Savin, and I. A. Tsurpal, “Stress concentration near curved apertures in a physically nonlinear elastic plate,” Arch. Mech. Stos.16, No. 4, 1009–1021 (1964).
A. N. Guz', I. S. Chernyshenko, Val. N. Chekhov, Vik. N. Chekhov, and K. I. Shnerenko, Cylindrical Shells Weakened by Apertures [in Russian], Naukova Dumka, Kiev (1974).
A. N. Guz', I. S. Chernyshenko, Val. N. Chekhov, Vik. N. Chekhov, and K. I. Shnerenko, Theory of Thin Shells Weakened by Apertures [in Russian], Naukova Dumka, Kiev (1980) (Computation Methods for Shells [in Russian], 6 vols., Vol. 1).
A. N. Guz', I. S. Chernyshenko, and K. I. Shnerenko, Spherical Caps Weakened by Apertures [in Russian], Naukova Dumka, Kiev (1970).
A. N. Guz' and K. I. Shnerenko, “On the stress of a shell weakened by two curved apertures,” Prikl. Mekh.,1, No. 5, 21–28 (1965).
A. N. Guz' and K. I. Shnerenko, “On the stress in a spherical shell weakened by two curved apertures,” Kontsentratsiya Napryazhenii, Issue 1, 120–124 (1965).
D. D. Ivlev and L. V. Ershov, Perturbation Method in the Theory of an Elastic-Plastic Body [in Russian], Nauka, Moscow (1978).
A. A. Il'yushin, Plasticity [in Russian], Gostekhizdat, Moscow-Leningrad (1948).
R. M. Israfilov, “On the stress of a gas-saturated massif near an elliptical shaft,” Prikl. Mekh.,20, No. 2, 52–58 (1984).
R. M. Israfilov, “Stress in a massif near a shaft of arbitrary cross section,” Prikl. Mekh.,22, No. 8, 14–21 (1986).
S. M. Zverev, “Method of metaharmonic potentials in problems of hydroelasticity,” Dokl. Akad. Nauk Ukr. SSR, Ser. A., No. 11, 46–49 (1980).
M. A. Kan and I. E. Troyanovskii, “Three-dimensional elastic problems for a hollow, nearly circular cylinder,” Moscow Inst. of Electrical Eng., Moscow (1979); in VINITI, Nov. 13, 1979, No. 3859-79.
L. V. Kantorovich and V. I. Krylov, Approximation Methods in Higher Analysis [in Russian], Fizmatgiz, Moscow (1962).
G. Kauderer, Nonlinear Mechanics [Russian translation], IL, Moscow (1961).
Ya. F. Kayuk, Some Questions on Methods of Expansion in a Parameter [in Russian], Naukova Dumka, Kiev (1980).
A. D. Kovalenko and V. G. Karnaukhov, “On an approximate method of solving three-dimensional porblems in elasticity and viscoelasticity,” Prikl. Mekh.,5, No. 8, 1–10 (1969).
A. D. Kovalenko and V. G. Karnaukhov, “Approximate method of calculating the stress in thick shells of revolution,” Prikl. Mekh.,6, No. 6, 3–12 (1970).
M. A. Kovyryagin, “Stress in plates with complicated inner contours and under distributed loads,” Prikl. Teor. Uprug., pp. 89–93, Saratov (1980).
A. S. Kosmodamianskii, Anisotropic Multiply Connected Media [in Russian], Donetsk Univ. (1970).
A. S. Kosmodamianskii, Plane Elastic Problems of Plates with Apertures, Slots, and Ridges [in Russian], Vischaya Shkola, Kiev (1975).
A. S. Kosmodamianskii, Stress in an Anisotropic Medium with Apertures or Cavities [in Russian], Vischaya Shkola, Kiev; Donetsk (1976).
A. S. Kosmodamianskii, “Bending of anisotropic plates with curved apertures (Review),” Prikl. Mekh.,17, No. 2, 3–10 (1981).
D. Cole, Perturbation Methods in Applied Mathematics [Russian translation], Mir, Moscow (1972).
V. F. Kravtsov, “Stress state of a rotating noncircular disk,” Prikl. Teor. Uprug, pp. 84–88, Saratov (1980).
V. F. Kravtsov, “On the effect of aperture radius on the stress of a rotating noncircular disk,” Zadachi Prikl. Teor. Uprug., pp. 74–78, Saratov (1985).
V. D. Kubenko, “Some dynamical problems on the stress concentration near apertures,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1965).
V. D. Kubenko, “Stress near an elliptical aperture subjected to an oscillating pressure,” Prikl. Mekh.,1, No. 5, 133–137 (1965).
V. D. Kubenko, “Dynamical stress concentration near a square aperture under a steady-state wave motion,” Prikl. Mekh.,2, No. 12, 67–75 (1966).
V. D. Kubenko, “Dynamical stress concentration near an elliptical aperture,” Dop. Akad. Nauk Ukr. RSR, No. 3, 60–64 (1967).
V. D. Kubenko, “On the propagation of plane harmonic shear waves in a plate with a square aperture,” Prikl. Mekh.4, No. 2, 129–133 (1968).
V. D. Kubenko, Yu. N. Nemish, K. I. Shnerenko, and N. A. Shul'ga, “Perturbation method in boundary-value problems of the mechanics of a deformable body,” Prikl. Mekh.,18, No. 11, 3–20 (1982).
V. V. Kuznetsov and I. V. Fedorkova, “Application of the method of perturbation of the region of integration in the calculation and design of elastic shells of revolution,” Saratov Polytechnic Inst. (1984); in VINITI, Feb. 25, 1985, No. 1413-85.
G. G. Kuliev, “Effect of the rigidity of the reinforcing element on the stress concentration in singly connected and multiply connected physically nonlinear media,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1971).
G. G. Kuliev, Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 9, 801–804 (1971).
S. A. Kuliev, “Tapered groove of arbitrary shape at the edge of a half-plane,” Izv. Akad. Nauk SSSR, Ser. Fiz.-Tekh. Mat. Nauk,4, No. 2, 144–148 (1983).
G. V. Kutsenko and A. F. Ulitko, “Axisymmetric deformation in a hollow ellipsoid of revolution,” Tepl. Napryazh. Elem. Konstruk., Issue 11, 37–42 (1971).
M. A. Lavrent'ev, A. A. Deribas, E. I. Bichenkov, et al., “Explosive welding of metals,” in: Fundamental Research [in Russian], Nauka, Novosibirsk (1977), pp. 259–262.
A. D. Lapin, “Scattering of sound by an irregular waveguide at the critical frequencies of the normal wave,” Akust. Zh.,15, No. 4, 567–571 (1969).
S. G. Lekhnitskii, Anisotropic Plates [in Russian], Gostekhizdat, Moscow-Leningrad (1947).
S. G. Lekhnitskii, Twisting of Anisotropic and Nonuniform Rods [in Russian], Nauka, Moscow (1971).
V. A. Lomakin, “Stress concentration near a surface with rapidly oscillating irregularities,” Prikl. Mekh.,4, No. 2, 1–8 (1968).
V. A. Lomakin, Statistical Problems in the Mechanics of Solid Deformable Solids [in Russian], Nauka, Moscow (1970).
V. A. Lomakin, Theory of Elasticity of Nonuniform Bodies [in Russian], Moscow Univ. (1976).
P. Z. Lugovoi and N. A. Shul'ga, “Stress distribution near a curved aperture in a conical shell,” Prikl. Mekh.,12, No. 4, 41–46 (1967).
P. Z. Lugovoi and N. A. Shul'ga, “Stress distribution near a curved aperture in a conical shell under torsion,” Coprot. Mat. Teor. Cooruzh., Issue 48, 72–78 (1976).
E. I. Lun', “Some questions on the theory of shells with transverse shears,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Lvov (1970).
E. I. Lun' and A. A. Syas'kii, “On the calculation of the stress state near a curved aperture in a transversely isotropic shell,” Izv. Akad. Nauk Arm. SSR, Mekh.,26, No. 3, 64–70 (1973).
D. F. Lyalyuk, “On the stress state in thick noncanonical shells of revolution,” Prikl. Mekh.,17, No. 10, 120–123 (1981).
D. F. Lyalyuk, “Elastic equilibrium in thick noncanonial, nearly spherical shells,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1982).
D. F. Lyalyuk and Yu. N. Nemish, “Approximate method of calculating the stress state of thick noncanonical shells of revolution,” Trans. 9th All-Union Conf. on the Theory, of Shells and Plates [in Russian], Sudostroenie, Leningrad (1975), pp. 280–282.
D. F. Lyalyuk, Yu. N. Nemish, and D. I. Chernopiskii, “Elastic equilibrium in thick transversely isotropic, nearly spherical shells,” Trans. 12th All-Union Conf. of the Theory of Shells and Plates [in Russian], Vol. 3, Erevan Univ. (1980), pp. 38–44.
A. P. Matkovskii, “Thermal stress in a thin spherical shell with a curved aperture,” Prikl. Mekh.,19, No. 3, 46–49 (1983).
Yu. I. Matyash, “Axisymmetric elastic equilibrium of a trilayered, transversely corrugated, transversely isotropic cylinder,” Prikl. Mekh.19, No. 6, 39–46 (1983).
Yu. I. Matyash, “Elastic equilibrium of multilayered corrugated thick-walled cylinders,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1984).
Z. A. Medvedeva, “Bending of a transversely isotropic plate weakened by a curved aperture,” Prikl. Mekh.,22, No. 8, 35–41 (1986).
Ya. A. Metsavéér, N. D. Vexler, and A. S. Stulov, Diffraction of Acoustic Pulses by Elastic Bodies [in Russian], Nauka, Moscow (1979).
Yu. I. Mindlina, “Isotropic plate on an elastic foundation with a free noncircular boundary,” Prikl. Teor. Uprug., Saratov, 66–73 (1980).
A. N. Mikhailov, A. F. Belikov, and A. N. Dermin, “Experimental study of the process of wave formation in the explosive welding of metals,” Applied Methods [in Russian], Moscow (1977); Preprint, Academy of Sciences of the USSR, Inst. of Chemical Physics.
A. K. Moiseenko and I. A. Tsurpal, “Thermal stress in a nonlinear hollow cylinder and in a plate with an aperture,” Tepl. Napryazh. Elem. Konstruk., Issue 7, 130–140 (1967).
P. M. Morse and H. Feshbach, Methods of Theoretical Physics (2 Vols.), McGraw-Hill, New York (1953), Vol. 2.
V. I. Mossakovskii and A. B. Kovura, “Contact problems for an elastic half-space with circular and nearly circular curves between boundary conditions,” Dinam. Prochn. Tyazh. Mashin, No. 5, 74–89 (1980).
N. I. Muskhelishvili, Some Fundamental Problems of the Mathematical Theory of Elasticity [in Russian], Nauka, Moscow (1966).
A. Naife, Perturbation Methods [Russian translation], Mir, Moscow (1976).
A. Naife, Introduction to Perturbation Methods [Russian translation], Mir, Moscow (1984).
G. Neiber, Concentration of Stress [in Russian], Gostekhizdat, Moscow-Leningrad (1947).
V. N. Nemish, “Deformation of an isotropic sphere with noncanonical inclusions,” Mat. Fiz., Issue 19, 104–109 (1976).
V. N. Nemish, “Stress distribution near closed axisymmetric cavities and inclusions under torsion,” Prikl. Mekh.13, No. 11, 32–40 (1977).
V. N. Nemish, “Elastic equilibrium of three-dimensional deformable bodies bounded by surfaces of revolution,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1979).
V. N. Nemish, “Stress concentration near a nearly spherical cavity in a transversely isotropic medium,” Teor. Prikl. Mekh., No. 17, 12–19 (1986).
Yu. N. Nemish, “Stress concentration near curved apertures in the nonsymmetric theory of elasticity,” Prikl. Mekh.,2, No. 4, 85–96 (1966).
Yu. N. Nemish, “Two-dimensional problem in the moment theory of elasticity for a region with an aperture,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1966).
Yu. N. Nemish, Dop. Akad. Nauk. Ukr. RSR, Ser. A, No. 9, 860–864 (1968).
Yu. N. Nemish, “On the stress state in a Kosser medium weakened by a curved aperture,” Prikl. Mekh.,4, No. 9, 49–57 (1968).
Yu. N. Nemish, “Approximate solution of three-dimensional elastic problems for a transversely isotropic medium,” Prikl. Mekh.,5, No. 8, 26–34 (1969).
Yu. N. Nemish, Dop. Akad. Nauk. Ukr. RSR, Ser. A, No. 6, 542–547 (1970).
Yu. N. Nemish, “Approximate solution of some nonlinear, three-dimensional problems in the theory of elasticity,” Prikl. Mekh.,6, No. 7, 53–57 (1970).
Yu. N. Nemish, Dop. Akad. Nauk. Ukr. RSR, Ser. A, No. 11, 1015–1019 (1970).
Yu. N. Nemish, “On the stress state of elastically nonlinear bodies,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 4, 81–89 (1971).
Yu. N. Nemish, “Axisymmetric problem on the stress of an orthotropic elastic body,” Prikl. Mekh.,7, No. 6, 17–24 (1971).
Yu. N. Nemish, “On the thermostress of a physically nonlinear medium,” Tepl. Napryazh. Elem. Konstruk., Issue 11, 81–86 (1971).
Yu. N. Nemish, “Method of a small parameter in three-dimensional axisymmetric problems for a cylindrically orthotropic body,” Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 3, 247–249 (1972).
Yu. N. Nemish, “Approximate method of calculating the symmetric deformation of orthotropic bodies,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 5, 81–87 (1972).
Yu. N. Nemish, “Approximation method of solving boundary-value problems of the mathematical theory of elasticity for an anisotropic medium,” Mat. Fiz., No. 11, 98–104 (1972).
Yu. N. Nemish, Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 2, 155–158 (1973).
Yu. N. Nemish, “Elastic Equilibrium of three-dimensional deformable bodies bounded by noncircular cylindrical surfaces,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 2, 77–86 (1973).
Yu. N. Nemish, “Recursion relations for the method of perturbation in three-dimensional elastic problems,” Prikl. Mekh.,9, No. 9, 64–70 (1973).
Yu. N. Nemish, “Some three-dimensional boundary-value problems for an elastic medium bounded by cylindrical surfaces,” Mat. Fiz., No. 13, 73–78 (1973).
Yu. N. Nemish, “Boundary-value problems in the theory of elasticity for noncanonical regions,” Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 8, 743–747 (1974).
Yu. N. Nemish, “Method of perturbation of boundary shape in three-dimensional problems in the mechanics of a deformable body,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 1, 17–26 (1975).
Yu. N. Nemish, “On a method of calculating the stress in a corrugated thick shell,” Trans. 1st All-Union School on the Theory and Numerical Analysis of Shells and Plates [in Russian], Tbilisi Univ. (1975), pp. 381–393.
Yu. N. Nemish, “On a method of solving three-dimensional problems in the mechanics of a deformable body bounded by arbitrary surfaces,” Dokl. Akad. Nauk Ukr. SSR, Ser. A, No. 1, 48–52 (1976).
Yu. N. Nemish, “Foundations of the method of perturbation in three-dimensional problems in the mechanics of a deformable medium,” Prikl. Mekh.,13, No. 12, 25–33 (1977).
Yu. N. Nemish, “Approximate method of solving three-dimensional elastic problems for a curved orthotropic body in the case of a noncanonical region,” Prikl. Mekh.,14, No. 7, 10–17 (1978).
Yu. N. Nemish, “Three-dimensional problems in the theory of elasticity for noncanonical regions,” Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1979).
Yu. N. Nemish, “Three-dimensional boundary-value problems of elasticity for noncanonical regions,” Prikl. Mekh.,16, No. 2, 3–39 (1980).
Yu. N. Nemish, “Three-dimensional elastic problems for multilayered cylinders with noncanonical surfaces between layers,” Prikl. Mekh.,17, No. 5, 19–26 (1981).
Yu. N. Nemish, “Three-dimensional elastic problems for multilayered shells with nearly spherical surfaces between layers,” Prikl. Mekh.,17, No. 7, 23–29 (1981).
Yu. N. Nemish, “On boundary-value problems in heat conduction and thermoelasticity for nearly spherical, deformable bodies,” Prikl. Mekh.,17, No. 10, 42–50 (1981).
Yu. N. Nemish, “On boundary-value problems in heat conduction and thermoelasticity for nearly cylindrical, deformable bodies,” Prikl. Mekh.,18, No. 1, 28–35 (1982).
Yu. N. Nemish, “On a method of solving three-dimensional problems on the mechanics of a deformable cylinder with nonplanar ends,” Dokl. Akad. Nauk Ukr. SSR, Ser. A, No. 5, 34–37 (1982).
Yu. N. Nemish, “Study of the temperature and stress fields in a layered corrugated body,” Prikl. Mekh.,18, No. 5, 36–42 (1982).
Yu. N. Nemish, “Three-dimensional boundary-value problems for deformable cylinders with nonplanar ends,” Prikl. Mekh.,18, No. 6, 15–21 (1982).
Yu. N. Nemish, “Three-dimensional problem for a deformable cone with a symmetrically perturbed surface,” Dokl. Akad. Nauk Ukr. SSR, Ser. A, No. 7, 44–47 (1983).
Yu. N. Nemish, “Three-dimensional problem for a deformable cone with an asymmetrically perturbed surface,” Prikl. Mekh.,19, No. 3, 19–24 (1983).
Yu. N. Nemish, “Method of calculating temperature and stress fields in layered bodies of noncanonical shape,” Teor. Prikl. Mekh., No. 14, 16–24 (1983).
Yu. N. Nemish, “Study of the stress state of thick homogeneous and composite cylindrical shells with grooves,” All-Union Conf. on the Theory of Elasticity, Tbilisi (1984), pp. 205–206.
Yu. N. Nemish, “Diffraction of waves by nearly spherical corrugated bodies,” Mat. Fiz., No. 34, 89–95 (1983).
Yu. N. Nemish, “On the stress state of an elastic layer in a foreign medium with a noncanonical interface,” Prikl. Mekh.,20, No. 9, 20–29 (1984).
Yu. N. Nemish, “Three-dimensional problem for the deformation of a composite cone with noncanonical surfaces,” Prikl. Mekh.,21, No. 8, 28–34 (1985).
Yu. N. Nemish and N. M. Bloshko, “Elastic equilibrium in a finite corrugated cylinder,” Prikl. Mekh.,19, No. 5, 16–23 (1983).
Yu. N. Nemish and N. M. Bloshko, “Elastic equilibrium of a transversely isotropic hollow cylinder of finite length with circular grooves,” Prikl. Mekh.,21, No. 11, 24–31 (1985).
Yu. N. Nemish and N. M. Bloshko, “Stress in a hollow elastic cylinder with nonplanar ends,” Prikl. Mekh.,22, No. 2, 17–23 (1986).
Yu. N. Nemish and N. M. Bloshko, Stress in an Elastic Cylinder with Grooves [in Russian], Naukova Dumka, Kiev (1987).
Yu. N. Nemish, N. M. Bloshko, G. P. Grechka, and D. I. Chernopiskii, “Numerical study of boundary effects in hollow cylinders with circular grooves under axisymmetric self-balancing loads,” Prikl. Mekh.,21, No. 5, 8–13 (1985).
Yu. N. Nemish, N. M. Bloshko, and D. I. Chernopiskii, “Three-dimensional elastic problems for finite and infinite nearly canonical regions,” Prikl. Mekh.,20, No. 1, 32–38 (1984).
Yu. N. Nemish, N. M. Bloshko, and D. I. Chernopiskii, “Three-dimensional elastic problems for finite and infinite nearly canonical regions,” 6th All-Union Conf. on Theoretical and Applied Mechanics: Compilation of Notes [in Russian], Tashkent (1986).
Yu. N. Nemish, L. I. Trushina, and N. M. Bloshko, “On the stress state in a transversely corrugated hollow cylinder of finite length,” Raschet Prostr. Stroit. Konstruk., Issue 12, 66–72 (1985).
Yu. N. Nemish and R. M. Israfilov, “Coupled problem for the stress of a saturated porous medium near a noncircular cylindrical cavity,” Prikl. Mekh.,23, No. 4, 9–18 (1987).
Yu. N. Nemish and R. M. Israfilov, “Effect of coupling between the processes of deformation and filtration on the stress in a saturated medium near an elliptical cavity,” Prikl. Mekh.,23, No. 6, 73–78 (1987).
Yu. N. Nemish and D. F. Lyalyuk, “On the stress in a thick, nearly spherical noncanonical shell,” Prikl. Mekh.,19, No. 8, 29–34 (1983).
Yu. N. Nemish, D. F. Lyalyuk, and D. I. Chernopiskii, “Axisymmetric stress state of thick, nearly spherical elastic shells,” Prikl. Mekh.,18, No. 12, 18–24 (1982).
Yu. N. Nemish and Yu. I. Matyash, “On the stress in multilayered, thick, longitudinally corrugated cylinders,” Prikl. Mekh.,19, No. 11, 12–22 (1983).
Yu. N. Nemish and Yu. I. Matyash, “Stress in multilayered, thick, transversely corrugated cylinders,” Prikl. Mekh.,20, No. 6, 29–34 (1984).
Yu. N. Nemish and V. N. Nemish, “Torsion in orthotropic bodies of revolution with noncanonical cavities and inclusions,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 6, 101–111 (1976).
Yu. N. Nemish and V. N. Nemish, “Solution of three-dimensional elastic problems for a transversely isotropic medium with noncanonical regions,” Prikl. Mekh.,12, No. 12, 73–82 (1976).
Yu. N. Nemish and V. N. Nemish, “Stress in a transversely isotropic medium weakened by a closed, conical cavity,” Mat. Fiz.,26, 110–114 (1979).
Yu. N. Nemish, V. N. Nemish, and P. F. Yarema, “Stress distribution near noncanonical surfaces,” Prikl. Mekh.,7, No. 12, 41–50 (1971).
Yu. N. Nemish and B. L. Pelekh, “On an analogy between the bending of a plate of the Timoshenko type and a plane problem in the moment theory of elasticity,” Prikl. Mekh.,5, No. 4, 127–132 (1969).
Yu. N. Nemish and B. L. Pelekh, “Bending of a transversely isotropic plate with curved inclusions,” Prikl. Mekh.,6, No. 1, 119–124 (1970).
Yu. N. Nemish, B. L. Pelekh, and I. Yu. Khoma, “Bending of a transversely isotropic plate with curved apertures,” Prikl. Mekh.,5, No. 10, 87–95 (1969).
Yu. N. Nemish, I. S. Sagalyuk, and D. I. Chernopiskii, “Study of the axisymmetric stress state of a medium with noncanonical elastic inclusions,” Prikl. Mekh.,21, No. 6, 23–30 (1985).
Yu. N. Nemish, I. S. Sagalyuk, and D. I. Chernopiskii, “Axisymmetric stress state of an elastic medium with a nearly spherical reinforced cavity,” Prikl. Mekh.,21, No. 12, 41–47 (1985).
Yu. N. Nemish, I. S. Sagalyuk, and D. I. Chernopiskii, “Stress distribution in an elastic medium with a reinforced noncanonical cavity under a nonuniform load,” Prikl. Mekh.,23, No. 1, 23–29 (1987).
Yu. N. Nemish and D. I. Chernopiskii, “Thermostress of an elastically nonlinear hollow sphere under aerodynamic heating,” Prikl. Mekh.,10, No. 6, 15–26 (1974).
Yu. N. Nemish and D. I. Chernopiskii, “Axisymmetric stress in deformable cylinders of variable thickness,” Prikl. Mekh.,11, No. 10, 9–18 (1975).
Yu. N. Nemish and D. I. Chernopiskii, “On the convergence of the method of successive approximations in physically nonlinear boundary-value problems,” Mat. Fiz., No. 18, 125–130 (1975).
Yu. N. Nemish and D. I. Chernopiskii, “Asymptotic methods for thick shells bounded by noncoordinate surface,” Trans. 10th All-Union Conf. on the Theory of Shells and Plates (Kutaisi, 1975), Metsniereba, Tbilisi (1975), Vol. 1, pp. 235–243.
Yu. N. Nemish and D. I. Chernopiskii, “Some axisymmetric boundary-value problems on the statics of a transversely corrugated multilayered cylinder,” Prikl. Mekh.,13, No. 6, 38–46 (1977).
Yu. N. Nemish and D. I. Chernopiskii, “Some three-dimensional boundary-value problems for a longitudinally corrugated, thick-walled cylinder,” Prikl. Mekh.,14, No. 3, 34–44 (1978).
Yu. N. Nemish and D. I. Chernopiskii, “Three-dimensional elastic boundary-value problems for a transversely corrugated, thick-walled cylinder,” Prikl. Mekh.,17, No. 12, 20–26 (1981).
Yu. N. Nemish and D. I. Chernopiskii, Elastic Equilibrium in Corrugated Bodies [in Russian], Naukova Dumka, Kiev (1982).
Yu. N. Nemish and D. I. Chernopiskii, “Three-dimensional stress state of a longitudinally corrugated elastic cylinder,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 3, 55–62 (1983).
A. V. Netrebko and Z. S. Falaleeva, “Application of the method of perturbation to a problem on a strip with an irregular boundary,” Trans. Seminar on the Strength in Plates, Moscow (1984), pp. 4–9.
V. A. Pal'mov, “Stress concentration near surface irregularities of an elastic body,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 3, 104–108 (1963).
V. A. Pal'mov, “Stress state near surface irregularities of elastic bodies,” Prikl. Mat. Mekh.,27, No. 5, 963–969 (1963).
V. A. Pal'mov, “Elastic plane with an aperture of irregular shape,” Trans. Leningrad Polytechnic Inst., No. 235, 35–40 (1964).
B. L. Pelekh, “Solution of a problem on the bending of a plate for a multiply connected region,” Prikl. Mekh.,5, No. 9, 54–61 (1969).
B. L. Pelekh, Stress Concentration Near an Aperture of a Transversely Isotropic Plate Under Bend [in Russian], Naukova Dumka, Kiev (1977).
B. L. Pelekh and V. A. Laz'ko, Layered Anisotropic Plates and Shells with Stress Concentrators [in Russian], Naukova Dumka, Kiev (1982).
B. L. Pelekh and A. A. Syas'kii, Stress Distribution near Apertures in Anisotropic Shells Pliable to Shear [in Russian], Naukova Dumka, Kiev (1975).
B. L. Pelekh, A. A. Syas'kii, and V. A. Syas'kii, “Stress in a transversely isotropic spherical shell with a curved inclusion,” Mat. Met. Fiz.-Mekh. Polya, Issue 6, 49–53 (1977).
G. S. Pisarenko and A. A. Lebedev, Resistance of Materials to Deformation and Breakdown under Complicated Stress States [in Russian], Naukova Dumka, Kiev (1969).
G. V. Plyanko, O. V. Magiiovich, and V. N. Maksimovich, “Vibration of a hollow shell under a localized load,” Prikl. Mekh.,19, No. 8, 49–52 (1983).
Yu. N. Podil'chuk, “Approximation methods of solving boundary-value problems of elasticity for nearly-ellipsoidal figures,” Prikl. Mekh.,6, No. 9, 23–30 (1970).
Yu. N. Podil'chuk, Boundary Problems in the Statics of Elastic Bodies [in Russian], Naukova Dumka, Kiev (1984) [Three-Dimensional Problems of Elasticity and Plasticity (6 vols.); Vol. 1].
Yu. N. Podil'chuk and A. M. Kirichenko, “On an approximate method of solving boundary-value problems of elasticity for figures which are nearly ellipsoids of revolution,” Dokl. Akad. Nauk Ukr. SSR, Ser. A, No. 7, 650–655 (1970).
Yu. N. Podil'chuk and L. A. Neznakina, “Stress distribution near a short fiber soldered into a matrix,” Prikl. Mekh.,13, No. 5, 3–10 (1977).
Yu. N. Podil'chuk and L. A. Neznakina, “On an approximate method of solving threedimensional elastic problems,” Prikl. Mekh.,13, No. 10, 100–107 (1977).
V. K. Prokopov, “Review of the book ‘Statics of Elastic Bodies of Noncanonical Shape’,” Prikl. Mekh.,21, No. 8, 123–127 (1985).
G. N. Savin, “Stress distribution in thin shells weakened by an aperture”, Problems in Continuum Mechanics [in Russian], Izd. Akad. Nauk SSSR (1961), pp. 338–358.
G. N. Savin, “Stress concentration near apertures in shells”, Theory of Plates and Shells [in Russian], Izd. Akad. Nauk Ukr. SSR, Kiev (1962), pp. 70–85.
G. N. Savin, “Stress concentration near curved apertures in plates and shells”, Konts. Napryazh., Issue 1, 5–38 (1965).
G. N. Savin, Fundamentals of Plane Problems in the Moment Theory of Elasticity [in Russian], Kiev Univ. (1965).
G. N. Savin, “Stress concentration near curved apertures in plates and shells”, Trans. 2nd All-Union Conf. on Theoretical and Applied Mechanics, Issue 3, pp. 295–308 (1966).
G. N. Savin, Stress Distribution near Apertures [in Russian], Naukova Dumka, Kiev (1968).
G. N. Savin and A. N. Guz', “Stress concentration near an elliptical aperture in a spherical shell”, Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 1, 54–58 (1964).
G. N. Savin and A. N. Guz', “Stress state near curved apertures in shells”, Izv. Akad. Nauk SSSR, Mekh. Mashinostr., No. 6, 96–105 (1964).
G. N. Savin and A. N. Guz', “On a method of solving plane problems of the moment theory of elasticity for multiply connected regions”, Prikl. Mekh.,2, No. 1, 3–19 (1968).
G. N. Savin, A. N. Guz', and I. A. Tsurpal, “Physically nonlinear problems for plates and shells weakened by apertures”, in: Physically and Geometrically Nonlinear Problems of the Theory of Plates and Shells [in Russian], Tartu Univ. (1966), pp. 204–234.
G. N. Savin, A. S. Kosmodamianskii, and A. N. Guz', “Stress concentration near apertures”, Prikl. Mekh.,3, No. 10, 21–37 (1967).
G. N. Savin and Yu. N. Nemish, “On stress concentration in the moment theory of elasticity”, Prikl. Mekh.,4, No. 12, 1–17 (1968).
G. N. Savin and Yu. N. Nemish, “Method of perturbation of the elastic properties in the mechanics of solid deformable bodies”, Dokl. Akad. Nauk SSSR,216, No. 1, 53–55 (1974).
I. V. Svirskii, Methods of the Bubnov-Galerkin Type and Successive Approximations, [in Russian], Nauka, Moscow (1968).
V. S. Sedykh, “Explosive welding”, in: Welding in Mechanical Engineering., N. A. Ol'shanskii (ed.), Mashinostroenie, Moscow (1978); Vol. 1, pp. 362–375.
A. E. Andreev (ed.), Bellows. Calculation and Design [in Russian], Mashinostroenie, Moscow (1975).
L. V. Slepneva, “Effect of the boundary conditions on the stress distribution near an elliptical aperture in a spherical shell”, Prikl. Mekh.,4, No. 7, 40–48 (1968).
Slot and Moubray, “Note on the coefficients of stress concentration for symmetric U-shaped grooves in planar samples”, Tr. Am. o-va Inzh. Mekh., Ser. E, Prikl. Mekh.,36, No. 4, 241–242 (1969).
Collected Works of Academician A. N. Krylov, Publ. by the Academy of Sciences of the USSR, Moscow-Leningrad (1948), Vol. 10.
A. A. Syas'kii, “Stress concentration near apertures in shells with finite rigidity to shear”, Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Lvov (1972).
A. A. Syas'kii, “Stress concentration in a piecewise-homogeneous orthotropic spherical shell with a curved aperture”, Prikl. Mekh.,14, 132–136 (1978).
A. A. Syas'kii and V. A. Syas'kii, “Stress in a piecewise-homogeneous spherical shell with a curved aperture”, Prikl. Mekh.,12, No. 7, 18–23 (1976).
A. G. Vgodchikov and V. A. Soboleva, “Stress concentration near curved apertures in plates in the Reissner theory”, Prikl. Mekh.,8, No. 6, 58–66 (1972).
A. I. Uzdalev, Thermal Stress in Plates Bounded by a Doubly Connected Contour [in Russian], Saratov Univ. (1975).
K. U. Urazgil'dyaev, A. G. Cheberyak, V. A. Chubok, and P. G. Shishkin, “Stress state of a bilayered plate with a wavy surface”, Prikl. Mekh.,11, No. 12, 48–53 (1975).
N. N. Fotieva and V. G. Garaichuk, “Diffraction of harmonic elastic waves radiated by sources near apertures of arbitrary shape”, in: Theory and Application of Mechanics, 4th Congress, Bulg. Akad. Nauk, Sofia (1980), pp. 64–69.
G. D. Khan'zhova, “Temperature distribution in a finite noncircular cylinder”, Mekh. Deform. Sred., Issue 4, 25–32 (1976).
G. M. Khatiashvili, “On the deformation of a cylindrical body with a slightly canted axis”, Tr. Vychisl. Tsentra GSSR,20, No. 1, 104–115 (1980).
G. M. Khatiashvili, “Approximate solution of a Saint-Venant problem for a nearly cylindrical body”, Prikl. Mekh.,17, No. 4, 10–15 (1981).
G. M. Khatiashvili, Almansi-Mitchell Problem for Homogeneous and Composite Bodies [in Russian], Metsniereba, Tbilisi (1983), Chap. 1.
L. P. Khoroshun, “Theory of saturated porous media”, Prikl. Mekh.,12, No. 12, 35–41 (1976).
L. P. Khoroshun and R. M. Israfilov, “Stress state near a shaft with a square cross section”, Prikl. Mekh.,20, No. 11, 108–111 (1984).
L. P. Khoroshun and E. N. Shikula, “Stress state near an ellipsoidal shaft in a gas-saturated massif for unsteady filtration of the gas”, Prikl. Mekh.,20, No. 4, 14–18 (1984).
L. P. Khoroshun and E. N. Shikula, “Nonaxisymmetric stress state near a cylindrical shaft in a gas-saturated massif for unsteady filtration of the gas”, Prikl. Mekh.,21, No. 8, 10–17 (1985).
A. P. Khusu, Yu. R. Vitenberg, and V. A. Pal'mov, Surface Irregularities: Probability-Theoretic Approach [in Russian], Nauka, Moscow (1975).
I. A. Tsurpal, “Stress concentration near a curved aperture in a plate for a nonlinear law of elasticity”, Tr. I Recp. Konf. Molodykh Uchenykh, Issue 2, pp. 705–716 (1965).
I. A. Tsurpal, “Stress concentration near a square aperture in a physically nonlinear elastic plate”, Izv. Akad. Nauk SSSR, Mekh., No. 6, 71–76 (1965).
I. A. Tsurpal, “Stress state near a curved aperture in a physically nonlinear elastic plate”, Prochn. Korp. Sudna, Issue 67, 125–139 (1965).
I. A. Tsurpal, “Physically nonlinear elastic plate weakened by an arbitrary aperture”, Kontsentr. Napryazh., Issue 1, 305–311 (1965).
I. A. Tsurpal, “Thermostress concentration near arbitrary apertures for elastically nonlinear materials”, Tepl. Napryazh. Elem. Konstruk, Issue 8, 182–187 (1969).
I. A. Tsurpal, “Some problems on the stress concentration near apertures for a physically nonlinear material”, Author's Abstract of Candidate's Dissertation, Technical Sciences, Kiev (1968).
I. A. Tsurpal, “On a nonlinear stress concentration problem”, Prikl. Mekh.,4, No. 10, 51–58 (1968).
I. A. Tsurpal, “Stress concentration problems for highly elastic materials”, Stroit. Mekh. Korabl., Issue 10, 27–30 (1968).
I. A. Tsurpal, “Some problems of stress concentration near apertures and cavities for physically nonlinear material”, Kontsentr. Napryazh., Issue 2, 241–254 (1968).
I. A. Tsurpal, “Foundations of the theory of physically nonlinear bodies and its application to structural elements with apertures”, in: Polymers in Mechanical Engineering [in Russian], Kharkov Univ. (1972), Vol. 6, pp. 146–150.
I. A. Tsurpal, Calculation of Structural Elements of Elastically Nonlinear Materials [in Russian], Tekhnika, Kiev (1976).
I. A. Tsurpal and M. A. Kuliev, “Solution of a plane, nonlinear elastic problem for the stress concentration in a biconical plate with a reinforced curved aperture”, 2nd Science and Engineering Conf. on Engineering Mechanics of Ships (Memory of Academician Yu. A. Shimanskii), Leningrad (1965), pp. 11–12.
I. A. Tsurpal and G. G. Kuliev, “Problems of stress concentration in physically non-linear materials (Review)”, Prikl. Mekh.,10, No. 7, 3–22 (1974).
I. A. Tsurpal and N. G. Tamurov, Calculation of Multiply Connected and Elastically Nonlinear Plates and Shells [in Russian], Vyshchaya Shkola, Kiev (1977).
I. A. Tsurpal and N. A. Shul'ga, “Stress state near curved apertures in shells for a nonlinear law of elasticity”, Prikl. Mekh.,2, No. 8, 51–58 (1966).
D. I. Chernopiskii, “On the stress in thick corrugated spherical shells”, Prikl. Mekh.,15, No. 10, 128–133 (1979).
D. I. Chernopiskii, “Study of the stress in thick elastic corrugated shells”, Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1980).
V. N. Chekhov, “Stress in a cylindrical shell with a moderately large curved aperture”, Prikl. Mekh.,6, No. 6, 116–120 (1970).
V. N. Chekhov, “On the stress distribution in a cylindrical shell with an elliptical aperture”, Prikl. Mekh.,7, No. 11, 41–46 (1971).
G. S. Shapiro, “Axisymmetric deformation of an ellipsoid of revolution”, Dokl. Akad. Nauk SSSR,58, No. 7, 1309–1312 (1947).
R. N. Shvets and V. I. Éleiko, Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 11, 1020–1023 (1977).
R. N. Shvets and V. I. Eleiko, “Stochastic thermal stress in a cylinder with an irregular surface”, Prikl. Mekh.,13, No. 12, 39–45 (1977).
R. N. Shvets and A. P. Matkovskii, “Thermal stress in a hollow cylindrical shell with a curved aperture”, Prikl. Mekh.,20, No. 12, 63–70 (1984).
R. N. Shvets, A. P. Matkovskii, and V. D. Pavlenko, “Temperature field in a thin shell with a curved aperture”, in: Applied Thermoelasticity [in Russian], Naukova Dumka, Kiev (1979), pp. 31–36.
E. N. Shikula, “Axisymmetric stress state near a shaft in the shape of an ellipsoid of revolution caused by unsteady filtration”, Trans. 9th Sci. Conf. of Students of the Inst. of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev (1982), pp. 230–234; in: VINITI, May 27, 1982, No. 2644-82.
E. N. Shikula, “Nonaxisymmetric stress state near an ellipsoidal shaft in a gas-saturated massif for unsteady filtration of the gas”, Prikl. Mekh.,20, No. 8, 18–24 (1984).
E. N. Shikula, “Axisymmetric stress state near a cylindrical shaft in a gas-saturated massif for unsteady filtration of the gas”, Prikl. Mekh.,21, No. 9, 16–21 (1985).
E. N. Shikula, “Stress state near shafts in a gas-saturated porous massif for unsteady filtration of the gas”, Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1985).
K. I. Shnerenko, “Stress distribution in a spherical shell around reinforced curved apertures”, Prikl. Mekh.,2, No. 11, 55–62 (1966).
K. I. Shnerenko, “Some equilibrium problems for spherical shells with apertures”, Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1966).
K. I. Shnerenko, “Stress in composite shells with apertures”, Author's Abstract of Candidate's Dissertation, Technical Sciences, Kiev (1981).
N. A. Shul'ga, “Bending of a thin plate weakened by a curved aperture for a nonlinear law of elasticity”, Prikl. Mekh.,2, No. 4, 50–54 (1966).
N. A. Shul'ga, “Stress concentration near apertures for the bending of a thin, physically nonlinear plate”, Author's Abstract of Candidate's Dissertation, Physicomathematical Sciences, Kiev (1966).
N. A. Shul'ga, “Stress state near an aperture in a thin, physically nonlinear plate”, Prikl. Mekh.,3, No. 12, 115–118 (1967).
N. A. Shul'ga, “Stress concentration near an aperture for the bending of a physically nonlinear plate”, Sci.-Eng. Conf. on the Effect of Stress Concentration on the Strength of the Components of Machines and of Structural Elements, Kiev (1970), pp. 44–46.
N. A. Shul'ga and P. Z. Lugovoi, “Stress concentration near a curved aperture in a conical shell”, Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 8, 725–729 (1976).
J. I. D. Alexander, P. H. Leo, and R. F. Sekerka, “Elastic fields about a perturbed cylindrical inclusion”, Acta Met.,33, No. 6, 975–983 (1985).
A. J. Basu and T. J. Lardner, “Deformation of a strip containing wavy inextensible fibers”, Mech. Res. Commun.,12, No. 3, 163–171 (1985).
J. P. Curtis, “Optimization of homogeneous thermal insulation layers”, Int. J. Sol. Struct.,19, No. 9, 813–823 (1983).
S. K. Datta, “Rectilinear oscillations of a rigid inclusion in an infinite elastic medium”, Int. J. Eng. Sci.,9, No. 10, 947–957 (1971).
Gai Biengzbeg, “The asymptotic method for problems of the diffraction of SH waves from a noncircular cylinder”, Acta Mech. Sin.,16, No. 1, 96–103 (1984).
P. H. Leo, J. I. D. Alexander, and R. F. Sekerka, “Elastic fields about a perturbed spherical inclusion”, Acta Met.,33, No. 6, 985–989 (1985).
M. Misicu, Teoria Mobilitatii Elastice, Editura Akademie R. S., Romaina Bucharest, (1972).
C. Panek and J. Dundurs, “Thermoelastic contact between bodies with wavy surfaces”, Trans. ASME, J. Appl. Mech.,46, No. 4, 854–860 (1979).
S. R. Reid, “A discussion of the mechanism of interface wave generation in explosive welding”, Int. J. Mech. Sci.,16, No. 6, 399–413 (1974).
G. N. Savin (Sawin), A. N. Guz' (Guz), and A. S. Kosmodamianskii (Kosmodamiaskij), Mech. Teor. Stosowana,8, No. 1, 3–18 (1970).
M. Skowronek, Rozpr. Inz.,29, No. 4, 527–543 (1981).
R. S. Tennyson, D. K. Roberts, and D. Zimcik, “Analysis of the stress distribution around unreinforced cutouts in circular cylindrical shells under axial compression”, NRC, NASA, Ann. Progr. Rept., UTJAS (1968), pp. 118–129.
Z. Zhou and Shu Wang, “The method of matrix conjoint multiplication for the problem of a circular arc corrugated diaphragm”, Appl. Math. Mech.,6, No. 6, 551–566 (1985).
Additional information
Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Prikladnaya Mekhanika, Vol. 23, No. 9, pp. 3–29, September, 1987.
Rights and permissions
About this article
Cite this article
Guz', A.N., Nemish, Y.N. Perturbation of boundary shape in continuum mechanics (review). Soviet Applied Mechanics 23, 799–822 (1987). https://doi.org/10.1007/BF00887782
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00887782