Abstract
Failure mechanisms of short-glass-fibre reinforced poly(ethylene terephthalate) were investigated with particular attention to the effects of fibre weight fraction (Wf=1 wt%, 30 wt% and 60 wt%). A fracture morphology study was carried out for the surface and for the interior of uniaxial tensile specimens. On the surface, tensile cracks occurring mostly at the fibre ends seemed to be more influential in catastrophic fracture initiation with decreasing Wf. However, the failure mechanisms in the interior were different from those on the surface. For specimens of low Wf (1 wt%), shear bands grew around the fibre ends. A “specific layer” was formed in the matrix along the fibre-matrix interface and shear cracks propagated near the interface in the fibre length direction. The fibre pull-out from the matrix as well as the voiding at the fibre ends, induced by the shear cracks, had strong effect on the fracture initiation. For intermediate and higher Wf (30 wt% and 60 wt%), the shear-band induced cracking near the interface caused matrix shear cracking which was the most influential factor in the fracture initiation. The shear failure in the interior almost dominated the fracture processes throughout the specimens.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
K. Friedrich, in “Microstructure and fracture of fibre reinforced thermoplastic polyethylene terephthalate”, Fortschr.-Ber. VDI-Zeitschr. Series 18 No. 12 (VDI-Verlag, Düsseldorf 1982).
Idem, in “Fracture Mechanical Behavior of Short Fibre Reinforced Thermoplastics”, Fortschr.-Ber. VDI-Zeitschr. Series 18 No. 18 (VDI-Verlag, Düsseldorf 1984).
Idem, Comp. Sci. Tech. 22 (1985) 43.
J. Krey, K. Friedrich and A. Moet, Polymer 29 (1988) 1433.
J. C. Malzahn and J. M. Schultz, Comp. Sci. Tech. 27 (1986) 253.
C. Lhymn and J. M. Schultz, J. Mater. Sci. 18 (1983) 2029.
Idem, Polym. Eng. Sci. 24 (1984) 1064.
C. Lhymn, J. Mater. Sci. Lett. 4 (1985) 1323.
F. Ramsteiner and R. Theysohn, Comp. Sci. Tech. 24 (1985) 231.
R. L. Hollis, R. Hammer and M. Y. Al-Jaroudi, J. Mater. Sci. 19 (1984) 1897.
J. Karger-Kocsis and K. Friedrich, ibid. 22 (1987) 947.
H. Voss and R. Walter, J. Mater. Sci. Lett. 4 (1985) 1174.
K. Friedrich, K. Schulte, G. Horstenkamp and T. W. Chou, J. Mater. Sci. 20 (1985) 3353.
R. W. Lang, J. A. Manson and R. W. Hertzberg, ibid. 22 (1987) 4015.
N. Sato, T. Kurauchi, S. Sato and O. Kamigaito, ibid. 19 (1984) 1145.
Idem., J. Comp. Mater. 22 (1988) 850.
N. Sato, T. Kurauchi and O. Kamigaito, J. Mater. Sci. 21 (1986) 1005.
P. T. Curtis, M. G. Bader and J. E. Bailey, ibid. 13 (1978) 377.
J. Yuan, A. Hiltner, E. Baer and D. Rahrig, ibid. 20 (1985) 4377.
Idem, Polym. Eng. Sci. 24 (1984) 844.
T. F. Maclaughlin, J. Comp. Mater. 2 (1968) 44.
W. H. Bowyer and M. G. Bader, J. Mater. Sci. 7 (1972) 1315.
F. Ramsteiner, Composites, 12 (1981) 65.
K. Stade, Polym. Eng. Sci. 17 (1977) 50.
W-Y. Chiu and G-D. Shyu, J. Appl. Polym. Sci. 34 (1987) 1493.
B. Fisa, Polym. Composites, 6 (1985) 232.
A. Salinas and J. F. T. Pittman, Polym. Eng. Sci. 21 (1981) 23.
B. Franzen, C. Klason, J. Kubat and T. Kitano, Composites, 20 (1989) 65.
R. von Turkovich and L. Erwin, Polym. Eng. Sci. 23 (1983) 743.
N. S. Choi and K. Takahashi, in “Proceedings of Benibana International Symposium on how to improve the toughness of polymers and composites” edited by I. Narisawa (Yamagata, Japan, 1990) p. 249.
N. S. Choi and K. Takahashi, Comp. Sci. Tech., in press.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Takahashi, K., Choi, NS. Influence of fibre weight fraction on failure mechanisms of poly(ethylene terephthalate) reinforced by short-glass-fibres. J Mater Sci 26, 4648–4656 (1991). https://doi.org/10.1007/BF00612401
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00612401