Conclusions
-
1.
We constructed analytical solutions of the problems of laminations near a transverse crack in a laminated composite in an arbitrary homogeneous field of external stresses.
-
2.
We investigated the stability and instability of processes of lamination and the effects of the magnitude of friction on the fracture surfaces and of the type of load on these processes.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literature cited
V. V. Bolotin and Yu. N. Novichkov, The Mechanics of Multilayered Structures [in Russian], Moscow (1980).
A. S. Tetelman, “Fracture process in fiber composite materials,” in: Compos. Mater. Test and Design, ASTM STP 460, Philadelphia, Pa, (1969), pp. 473–502.
Inelastic Properties of Composite Materials [in Russian], Moscow (1978).
V. D. Kuliev, Yu. N. Rabotnov, and G. P. Cherepanov, “Inhibition of cracking at the interface of elastic media,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 4, 120–128 (1978).
A. I. Zobnin, “Cleavage in unidirectional composites,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 2, 168–171 (1977).
P. van Dyke and J. M. Hedgepth, “Stress concentrations from single-filament failure in composite materials,” Textile Res. J.,39, No. 7, 618–626 (1969).80.
A. Akbarzaden, “Effect of broken fibers in the strength of unidirectional composite materials,” Fibre Sci. Technol.,11, No. 3, 217–228 (1978).
A. M. Mikhailov, “Shear cracks in unidirectional glass-fiber reinforced plastic,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 1, 103–110 (1975).
V. V. Partsevskii, “Plane deformation of a laminated composite with transverse crack,” Mekh. Polim., No. 4, 632–636 (1978).
V. V. Partsevskii, “Stress distribution in a discrete model of a laminated medium near the section,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 3, 103–108 (1977).
A. K. Miller, “Thermal expansion coefficients for laminates obtained from invariant lamina properties,” Fibre Sci. Technol.,13, No. 5, 397–409 (1980).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 5, pp. 794–798, September–October, 1983.
Rights and permissions
About this article
Cite this article
Partsevskii, V.V. Stability of lamination in composites. Mech Compos Mater 19, 576–581 (1984). https://doi.org/10.1007/BF00604456
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00604456