Abstract
Due to the fact that in contact problems the contact area is not known a priori, a sufficient discretization to obtain a convergent finite element solution cannot be supplied from the outset. Therefore it is necessary to use adaptive finite element methods to adjust automatically the mesh sizes not only in the bodies under consideration but also in the contact zone. In this paper we develop an adaptive method for geometrically linear contact problems, which also includes elastoplastic material behavior. The radial return algorithm is used to derive the error estimator for one time increment of the solution process. The error estimator is based on the Zienkiewicz-Zhu projection scheme, which is extended to account for the special situation in the contact interface.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Babuska, I.; Miller, A. 1987: A feedback finite element method with a posteriori error estimation: Part I. The finite element method and some basic properties of the a posteriori error estimation, Comp. Meth. Appl. Mech. Engrg., 61: 1–40
Babuska, I.; Rheinboldt, W. 1978: Error estimates for adaptive finite element computations, J. Num. Analysis, 15: 736–754
Carstensen, C.; Scherf, O.; Wriggers, P.: A posteriori estimate and adaptive mesh refinement for contact of elastic bodies, submitted to Comp. Meth. Appl. Mech. Engrg.
Hlavacek, I.; Haslinger, J.; Necas, J.; Lovisek, J. 1988: Solution of Variational Inequalities in Mechanics, Springer, New York
Johnson, C. 1987: Numerical Solutions of Partial Differential Equations by the Finite Element Method, Cambridge Press, New York
Johnson, C. 1991: Adaptive finite element methods for the obstacle problem, Technical Report, Chalmers University of Technology, Göteborg
Johnson, C.; Hansbo, P. 1992: Adaptive finite element methods in computational mechanics, Comp. Meth. Appl. Mech. Engrg., 101: 143–181
Kikuchi, N.; Oden, J. T. 1988: Contact Problems in Elasticity: A Study of Variational Inequalities and Finite Element Methods, SIAM, Philadelphia
Krieg, R. D.; Krieg, D. B. 1977: Accuracies of numerical Solution Methods for the elastic-perfectly plastic model, J. Press. Vessel Techn., ASME, 99
Laursen, T. A.; Simo, J. C. 1991: On the the formulation and numerical treatment of finite deformation frictional contact problems, in: Computational Methods in Nonlinear Mechanics, P.Wriggers, W.Wagner, eds., Springer, Berlin
Lee, C. Y.; Oden, J. T.; Ainsworth, M. 1991: Local a posteriori error estimates and numerical results for contact problems and problems of flow trough porous media, in: Nonlinear Computational Mechanics P.Wriggers, P.Wagner, eds., 671–689, Springer, Berlin
Luenberger, D. G. 1984: Linear and nonlinear programming, Addison Wesley, Reading
Ortiz, M.; Popov, E. P. 1985: Accuracy and stability of integration algorithms for elastoplastic constitutive equation, Int. J. Num. Meth. Engrg., 21: 1561–1576
Ortiz, M.; QuigleyIV, J. J. 1991: Adaptive mesh refinement in strain localization problems, Comp. Meth. Appl. Mech. Engrg., 90: 781–804
Peraire, J.; Vahdati, M.; Morgan, K. Zienkiewicz, O. C. 1987: Adaptive meshing for compressible flow computations, J. Comp. Phys., 72: 449–466
Peric, D.; Yu, J.; Owen, D. R. J. 1994: On error estimates and adaptivity in elastoplastic solid: Applications to the numerical simulation of strain localization in classical and Cosserat continua, Int. J. Num. Meth. Engrg., 37: 1351–1379
Simo, J. C. 1991: Nonlinear stability of the time discrete variational problem in nonlinear heat conduction and elastoplasticity, Comp. Meth. Appl. Mech. Engrg., 88: 111–121
Simo, J. C. 1995: Topics on the numerical analysis and simulation of plasticity, Handbook of Numerical Analysis, Vol III, P. G. Ciarlet, J. L. Lions, eds., Elsevier
Simo, J. C.; Rifai, M. S. 1990: A class of mixed assumed strain methods and the method of incompatible modes, Int. J. Num. Meth. Engrg., 29: 1595–1638
Simo, J. C.; Taylor, R. L. 1985: Consistent tangent operators for rate-independent elastoplasticity, Comp. Meth. Appl. Mech. Engrg., 48: 101–118
Sloan, S. W. 1987: A fast algorithm for constructing delaunay triangularization in the plane, Adv. Eng. Software, 9: 34–55
Wriggers, P.; Miehe, C. 1994: Contact constraints within coupled thermomechanical analysis—A finite element model, Comp. Meth. Appl. Mech. Engrg., 113: 301–319
Wriggers, P.; Scherf, O.; Carstensen, C. 1994: Adaptive techniques for the contact of elastic bodies, in: Recent Developments in Finite Element Analysis, T. J. R.Hughes, E.Onate, O. C.Zienkiewicz, eds., CIMNE, Barcelona
Zienkiewicz, O. C.; Liu, Y. C.; Huang, G. C. 1988: Error estimation and adaptivity in flow formulation for forming problems, Int. J. Num. Meth. Engrg., 25: 23–42
Zienkiewicz, O. C.; Taylor, R. L. 1988: The finite element method, 4th ed., Vol. I, McGraw Hill, London
Zienkiewicz, O. C.; Zhu, J. Z. 1987: A simple error estimator and adaptive procedure for practical engineering analysis, Int. J. Num. Meth. Engrg., 24: 337–357
Zienkiewicz, O. C.; Zhu, J. Z. 1992: The superconvergent patch recovery and a posteriori error estimates. Part 1: The recovery technique. Int. J. Num. Meth. Engrg., 33: 1331–1364
Author information
Authors and Affiliations
Additional information
Communicated by S. N. Atluri, 18 August 1995
In memoriam of J. C. Simo
Rights and permissions
About this article
Cite this article
Wriggers, P., Scherf, O. An adaptive finite element algorithm for contact problems in plasticity. Computational Mechanics 17, 88–97 (1995). https://doi.org/10.1007/BF00356481
Issue Date:
DOI: https://doi.org/10.1007/BF00356481