Abstract
This paper describes an experimental setup for axial laminar flow of liquids in the annulus between two eccentered cylinders. The design uses a conductivity method for measuring peak axial velocities around the annulus, and for the determination of displacement efficiency when displacing one fluid by another (displacement efficiency being defined as the ratio of volume of displaced fluid removed from the annulus, to the volume of the annulus, after a given number of annular volumes have been pumped). In an eccentric annulus, lower axial velocity in the narrow side produces “channeling” of the displacing fluid in the wide side and reduces the displacement efficiency. A positive density contrast between the two fluids can increase the efficiency by promoting azimuthal flow of the (denser) displacing fluid towards the narrow side. In this paper we report that gravity driven azimuthal flow is prone to severe instabilities which accelerate the displacement process but may leave behind an immobile strip of the displaced fluid in the narrow side.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Abbreviations
- C m :
-
mean tracer concentration in exit stream
- C 0 :
-
tracer concentration in displacing fluid
- d m:
-
distance between centres of inner and outer pipes
- E :
-
circulation or displacement efficiency
- e :
-
non-dimensional eccentricity [= d/(R 0-R i)]
- g m s−2 :
-
gravitational acceleration
- h m:
-
typical annular gap ( = R 0-R i)
- k Pa sn :
-
consistency index in Herschel-Bulkley equation
- L m:
-
hydrostatic head between wide and narrow sides of annulus
- n :
-
flow behaviour index in Herschel-Bulkley equation
- p Pa:
-
pressure
- Q m3 s−1 :
-
volume flow rate
- R i m:
-
inner radius of annulus
- R 0 m:
-
outer radius of annulus
- r m:
-
radial distance in annulus
- T s:
-
time
- T b s:
-
breakthrough time
- V m3 :
-
volume of annulus
- w m s−1 :
-
axial velocity
- w max m s−1 :
-
peak axial velocity
- w m s−1 :
-
mean flow velocity
- z m:
-
length in direction of flow
- ġg s−1 :
-
shear rate
- θ :
-
angular position around annulus
- μ Pa s:
-
shear viscosity
- ρ Kg m−3 :
-
fluid density
- τ Pa:
-
shear stress
- τ y Pa:
-
Herschel-Bulkley yield-stress
- φ :
-
angle of deviation from vertical
- *:
-
denotes non-dimensionalized quantities such as time, etc.
- S:
-
specifies value of variable at position S along the annulus
References
Beirute, R. M.; Sabins, F. L.; Ravi, K. V. 1991: Large-scale experiments show proper hole conditioning: A critical requirement for successful cementing operations. SPE Paper 22774. Presented at the 66th Annual Conference, Dallas, Oct.
Bird, R. B.; Armstrong, R. C.; Hassager, O. 1987: Dynamics of polymeric liquids. Volume 1: Fluid mechanics (second edition). Appendix B. New York: Wiley
Clark, R. C.; Carter, L. G. 1973: Mud displacement with cement slurries. J. Pet. Tech., July 775–783
Haut, R. C.; Collins, R. E.; Graves, W. G. 1978: Applications of a computer simulator to primary cementing. SPE Paper 7588. Presented at the 53rd Annual Conference, Houston, Oct.
Haut, R. C.; Crook, R. J. 1979: Primary cementing: The mud displacement process. SPE Paper 8253. Presented at the 54th Annual Conference, Las Vegas, Sep.
Herschel, W. H.; Bulkley, R. 1926: Konsistenzmessungen von Gummi-Benzollösungen. Kolloid Z. 39, 291–300
Levenspiel, O. 1972: Chemical Reaction Engineering. Chapter 9. New York: Wiley
Lockyear, C. F.; Hibbert, A. P. 1988: A novel approach to primary cementation using a field scale flow loop. SPE Paper 18376. Presented at the European Petroleum Conference. London, Oct.
Lockyear, C. F.; Ryan, D. F.; Gunningham, M. M. 1989: Cement channeling: How to predict and prevent. SPE Paper 19865. Presented at the 64th Annual Conference, San Antonio, Oct.
Long, P. J. G. 1991: Experimental studies of fluid-fluid displacement in annuli. Ph.D. thesis, Cambridge University
Walton, I. C.; Bittleston, S. H. 1991: The axial flow of a Bingham Plastic in a narrow eccentric annulus. J. Fluid Mech. 222, 39
Zuiderwijk, J. J. M. 1974: Mud displacement in primary cementing. SPE Paper 4830. Presented at the European Spring Meeting, Amsterdam, May
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tehrani, M.A., Bittleston, S.H. & Long, P.J.G. Flow instabilities during annular displacement of one non-Newtonian fluid by another. Experiments in Fluids 14, 246–256 (1993). https://doi.org/10.1007/BF00194015
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00194015