Abstract
Experiments are described in which thin plates of polymethylmethacrylate were fractured with cracks set at various angles to an applied uniaxial stress. While there is substantial agreement with previous analytical predictions, it is shown that inclusion of the stress component parallel to the crack can improve the correlation between linear theory and experiment, using a critical stress at a critical distance interpretation of the stress intensity factor criterion.
Résumé
On décrit des essais de rupture de tôles minces en polymethylmethacrylate contenant des fissures orientées de diverses manières par rapport à une contrainte uniaxiale. Les prédictions analytiques sont confirmées de maniere substantielle par les résultats.
On montre par ailleurs que le fait d'introduire la composante de tension parallèle an plan de la fissure permet d'améliorer la corrélation entre la théorie lineaire et l'expérience, en interprétant le critère de facteur d'intensité de contraintes selon une contrainte critique à une certaine distance critique de la fissure.
Zusammenfassung
Es werden Versuche beschrieben, bei deren diinne Polymethylmethacrylatplatten mit Rißen, deren Richtung mit der einachsigen Spannung verschiedenartige Winkel bildeten, geprüft warden.
Die Ergebnisse bestätigen eindeutig die analytischen Voraussagen. Es wird jedoch weiter gezeigt, daB die Übereinstimmung von linearer Theorie und Versuch noch verbessert werden kann durch die Inbetrachtnahme der parallel zur Rißebene liegenden Spannungskomponenten, wobei eine kritische Spannung in einer kritischen Entfernung als Ausdruck des Spannungsintensitätsfaktors benutzt wurde.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
F. Erdogen and G. C. Sih, Trans. ASME., J. Basic Eng., 85D (1963) 519.
J. G. Williams, J. C. Radon and C. E. Turner, Pol. Eng. and Sci., April (1968) 130.
M. L. Williams, Trans ASME., J. Appr. Mech., 24, 1 (1957) 109.
B. Cotterell Int. Jour. Fract. Mech., 2, 3 (1966) 526.
I. Constable, J. G. Williams and L. E. Culver, Int. Jour. Fract. Mech., 6, 3, September (1970) 279.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Williams, J.G., Ewing, P.D. Fracture under complex stress — The angled crack problem. Int J Fract 8, 441–446 (1972). https://doi.org/10.1007/BF00191106
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00191106