Abstract
The chattering of machine tools, the squealing noise generated by tram wheels in narrow curves and the noise of band saws are examples of physical processes in which elastic structures exhibit self-sustained stick-slip vibrations. The nonlinear contact forces are often due to dry friction. Periodic, multiperiodic, and chaotic motions can occur, depending on the parameters.
Because the governing equations of motion are non-integrable, solutions can only be determined by numerical integration methods. The numerical investigations of continuous structures requires themodal approach to reduce the number of degrees of freedom.
As an example, a beam system has been investigated numerically and experimentally in this paper. The nonlinear motion of a point of the continuous structure has been measured by a specially developedlaser vibrometer.
The friction characteristic has been measured directly and identified from a measured time series by means of amodal state observer. The correlation dimension, which represents a lower bound of thefractal dimension, has been calculated using thecorrelation integral method from a measured time series of the beam system.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Moon F. C. and Shaw S. W., ‘Chaotic vibrations of a beam with non-linear boundary conditions’,International Journal of Non-Linear Mechanics 18, 1983, 465–477.
Hendriks F., ‘Bounce and chaotic motion in impact print hammers’,IBM Journal of Research and Development 27, 1983, 24–31.
Springer, H. and Ullrich, M., ‘Dynamics of dot-matrix printers’,Proceedings of IUTAM Symposium on Nonlinear Dynamics in Engineering Systems, University of Stuttgart, FRG, Aug. 21–25, 1990, Springer, Berlin, 297–304.
Szczygielski, W. M., ‘Dynamisches Verhalten eines schnell drehenden Rotors bei Anstreifvorgängen’, Zürich, ETH, Dissertation, No 8094, 1986.
Kaas-Petersen, Chr. and True, H., ‘Periodic, biperiodic and chaotic dynamical behavior of railway vehicles’,Proceedings 9th IAVSD-Symposium, Linkoping, 1985, 208–221.
Grabec I., ‘Explanation of random vibrations in cutting on grounds of deterministic chaos’,Robotics & Computer-Integrated Manufacturing 4, 1988, 129–134.
Pfeiffer, E., ‘Seltsame Attraktoren in Zahnradgetrieben’,Ingenieur-Archiv 58, 1988.
Magnus K.,Schwingungen, Teubner, Stuttgart, 1961. 070
Marui E. and Kato S., ‘Forced vibration of a base-exited single-degree-of-freedom system with Coulomb friction’,Transaction ASME, Journal of Dynamical Systems, Measurement and Control 106, 1984, 280–285.
Miyamoto M., ‘Effect of dry friction in link suspension on forced vibration of two-axle car’,Quarterly Reports 14, 1973, 99–103.
DenHartog J. P., ‘Forced vibrations with continued Coulomb and viscous friction’,Transaction ASME APM-53 9, 1931, 107–115.
Popp K. and Stelter P., ‘Stick-up vibrations and chaos’,Philosophical Transactions of the Royal Society, London A 332, 1990, 89–105.
Utkin V. I.,Sliding Modes and Their Application in Variable Structure Systems, English Translation Moscow: MIR Publication, 1978.
Pratt T. K. and Williams R., ‘Non-linear analysis of stick/slip motion’,Journal of Sound and Vibration 74, 1981, 531–542.
Dowell E. H. and Schwartz H. B., ‘Forced response of an cantilever beam with a dry friction damper attached. I. Theory’,Journal of Sound and Vibration 91, 1983, 255–267.
Ferri A. A. and Dowell E. H., ‘The behavior of a linear, damped modal system with a non-linear spring-mass — dry friction damper system attached. II’,Journal of Sound and Vibration 101, 1985, 55–74.
Shaw S. W., ‘Forced vibrations of a beam with one-sided amplitude constraint: theory and experiment’,Journal of Sound and Vibration 99, 1985, 199–212.
Popp, K. and Stelter, P., ‘Nonlinear oscillations of structures induced by dry friction’,Proceedings of IUTAM Symposium on Nonlinear Dynamics in Engineering Systems. University of Stuttgart, FRG. Aug. 21–25, 1990, Springer, Berlin, 233–240.
Stelter, P. and Popp, K., ‘Chaotic behaviour of structures excited by dry friction forces’,Proceedings of Workshop on Rolling Noise Generation, Berlin (ed. M. Heckl), 1989, 102–111.
Stelter, P., ‘Reibungserregte Schwingungen eines Kragbalkens’,ZAMM 71, 1991, 75–78.
Stelter, P., ‘Nichtlineare Schwingungen reibungserregter Strukturen’,VDI Fortschrittsherichte, Reihe 11 Schwingungstechnik 137, 1990.
Stelter, P. and Sextro, W., ‘Bifurcations in dynamical systems with dry friction’.Proceedings of Bifurcations and Chaos, Wurzburg, Aug. 20–24, 1990, Birkhauser, Basel, 311–315.
Mueller P. C., ‘Indirect measurement of nonlinear effects by state observers’,Proceedings of IUTAM Symposium on Nonlinear Dynamics in Engineering Systems, University of Stuttgart, FRG, Aug. 21–25, 1990, Springer, Berlin, 1990 205–215.
Grassberger P. and Procaccia I., ‘Measuring the strangeness of strange attractors’,Physica 9D, 1983, 189–208.
Packard N. H., Crutchfield J. P., Farmer J. D., and Shaw R. S., ‘Geometry of time series’,Physical Review Letters 45, 1980, 712–716.
Leven R. W., Koch B.-P., and Pompe B.,Chaos in dissipativen Systemen, Akademic-Verlag, Berlin, 1989.
Stelter P. and Pfingsten T., ‘Calculation of the fractal dimension via the correlation integral’,Chaos. Solitons and Fractals — Applications in Science and Engineering, Pergamon Press, New York, 1991.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Stelter, P. Nonlinear vibrations of structures induced by dry friction. Nonlinear Dyn 3, 329–345 (1992). https://doi.org/10.1007/BF00045070
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00045070