Abstract
An identification of the model parameters for a parallel cable-driven robot (8 cables for 6 degrees of freedom) is performed by using both a calibration and a self-calibration approach. Additionally, advanced tools and algorithmic improvements are presented to perform the parameter identification. A complete experimentation validates the robot accuracy improvement.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Bibliography
Skycam, 2007. URL www.skycam.tv.
Sebastian Besnard and Wisama Khalil. Identifiable parameters for parallel robots kinematic calibration. In International Conference on Robotics and Automation, volume 3, pages 2859–4729, Seoul, Korea, may 2001.
Paul T. Boggs, Richard H. Byrd, and Robert B. Schnabel. A stable and efficient algorithm for nonlinear orthogonal distance regression. SIAM Journal on Scientific and Statistical Computing, 8(6):1052–1078, 1987.
Paul Bosscher and al. Cable-suspended robotic contour crafting system. Automation in Construction, 17(1):45 – 55, 2007.
David Daney. Etalonnage geometrique des robots paralleles. PhD thesis, Nice - Sophia Antipolis, 2000.
David Daney, Nicolas Andreff, Gilles Chabert, and Yves Papegay. Interval method for calibration of parallel robots : Vision based experiments. Mechanism and Machine Theory, 41:929–944, 2006.
Amit J. Patel and Kornel F. Ehmann. Calibration of a hexapod machine tool using a redundant leg. International Journal of Machine Tools and Manufacture, 40(4):489–512, mar 2000.
S. Tadokoro, R. Verhoeven, M. Hiller, and T. Takamori. A portable parallel manipulator for search and rescue at large-scale urban earthquakes and an identification algorithm for the installation in unstructured environments. In Intelligent Robots and Systems, IROS ’99., volume 2, pages 1222 –1227 vol.2, 1999.
Yukio Takeda, Gang Shen, and Hiroaki Funabashi. A DBB-Based kinematic calibration method for In-Parallel actuated mechanisms using a fourier series. Journal of Mechanical Design, 126(5):856–865, 2004. doi:10.1115/1.1767822.
M. Saeed Varziri and Leila Notash. Kinematic calibration of a wire-actuated parallel robot. Mechanism and Machine Theory, 42(8):960 – 976, 2007.
Charles W. Wampler, John M. Hollerbach, and Tatsuo Arai. An implicit loop method for kinematic calibration and its application to Closed- Chain mechanisms. IEEE Transactions on Robotics and Automation, 11 (5):710–724, oct 1995.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 CISM, Udine
About this paper
Cite this paper
dit Sandretto, J.A., Daney, D., Gouttefarde, M. (2013). Calibration of a Fully-Constrained Parallel Cable-Driven Robot. In: Padois, V., Bidaud, P., Khatib, O. (eds) Romansy 19 – Robot Design, Dynamics and Control. CISM International Centre for Mechanical Sciences, vol 544. Springer, Vienna. https://doi.org/10.1007/978-3-7091-1379-0_10
Download citation
DOI: https://doi.org/10.1007/978-3-7091-1379-0_10
Publisher Name: Springer, Vienna
Print ISBN: 978-3-7091-1378-3
Online ISBN: 978-3-7091-1379-0
eBook Packages: EngineeringEngineering (R0)