Abstract
This paper presents results of the modelling of the influence of temperature on the magnetic characteristics of Fe40Ni38Mo4B18 amorphous alloy in as quenched state. For modelling Jiles-Athertos-Sablik model was used. Evolutionary strategies together with Hook-Jevies optimization were applied for calculation of model’s parameters on the base of experimental results. To provide sufficient (from technical point of view) agreement between model and experimental data, the extension of Jiles-Athertos-Sablik model was proposed. This extension connect model’s parameter k, describing magnetic wall density, with magnetic state of the material. Good agreement between experimental data and modelling confirms, that extended Jiles-Atherton-Sablik model creates the possibility of modelling of thermo-magnetic characteristics of cores of magnetoelastic sensors.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
- Amorphous Alloy
- Magnetic Characteristic
- Magnetic Hysteresis Loop
- Soft Magnetic Material
- Magnetization Process
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
R. O’Handley “Modern magnetic materials” Wiley, 2000.
F. Liorzou et al., IEEE Trans. Magn. 36 (2000) 418.
D. Lederer et al., IEEE Trans. Magn. 35 (1999) 1211.
D. C. Jiles, D. Atherton, J. Magn. Magn. Mater 61 (1986) 48.
D. C. Jiles, D. Atherton, J. Appl. Phys. 55 (1984) 2115.
J. Deane, IEEE Trans. Magn. 30 (1994) 2795.
P. Gaunt, IEEE Trans. Magn. 19 (1983) 2030.
R. Szewczyk, J. Phys D. (2007), in printing.
H. P. Schwefel “Evolution and optimum seeking” Wiley 1995.
M. Dobosz M. „Wspomagana komputerowo statystyczna analiza wynikow badan“ EXIT, Warszawa 2001.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Szewczyk, R. (2007). Modelling the influence of temperature on the magnetic characteristics of Fe40Ni38Mo4B18 amorphous alloy for magnetoelastic sensors. In: Jabłoński, R., Turkowski, M., Szewczyk, R. (eds) Recent Advances in Mechatronics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-73956-2_115
Download citation
DOI: https://doi.org/10.1007/978-3-540-73956-2_115
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-73955-5
Online ISBN: 978-3-540-73956-2
eBook Packages: EngineeringEngineering (R0)