Abstract
A new passive visual sensing system and special composed filter technology was developed firstly in this paper. Through the sensor, clearly welding gap image was collected. After regression recover, mean value smoothing, Laplace enhance, most noise was moved and gap edge became more evident. After analyzing the characters around welding gap, special straight line scanning was used. Then the gap edge was considered near the pixel gray value is the minimum on every scanning straight line. Extensively, because the gray value gradient of the gap edge is the local maximum, so the pixels on the two gap edges were found and were divided into two groups, at last, Hough transform was used to fit the two edges, and gap width and welding direction were calculated according to their definitions
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Brzakovic D., Khani D. T., Weld Pool Edge Detection for Automated Control of Welding, IEEE Transactions on Robotics and Automation, 1991, 7(3):397–403
Zhang Y. M., Kovacevic R. and Wu L., Closed-loop Control of Weld Penetration Us Front-Face Vision Sensing, Journal of Systems and Control Engineering, 1993, Vol. 207(3): 27–34.
Zhao D. B., Lou Y. J., Chen S. B., Wu L., Surface height and geometry para describing shape of weld pool during pulsed GTAW. SPIE International Symposium on Intelligent System and Advanced Manufacturing, Boston, Massachusetts, USA, 1999, V3833: 91–99
Zhang Guangjun, Intelligent control of weld shape during varied gap pulsed GTAW with wire filler based on visual sensing [D]. Harbin China, Harbin Institute of Technology, 2002.
J. J. Wang, T. Lin, S. B. Chen. Obtaining weld pool vision information during aluminum TIG welding, International Journal of Advanced Manufacture Technology, London, UK, 2005,V26: 219–227.
Ramesh Jain, Rangachar Kasturi, Brian G. Schunck. Machine vision, China machine press, China, 2003.
He Bin, Visual C++ Digital image processing, Post & Telecom press, Beijing, China, 2002.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Fan, C., Chen, S.B., Lin, T. (2007). Visual Sensing and Image Processing in Aluminum Alloy Welding. In: Tarn, TJ., Chen, SB., Zhou, C. (eds) Robotic Welding, Intelligence and Automation. Lecture Notes in Control and Information Sciences, vol 362. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-73374-4_32
Download citation
DOI: https://doi.org/10.1007/978-3-540-73374-4_32
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-73373-7
Online ISBN: 978-3-540-73374-4
eBook Packages: EngineeringEngineering (R0)