Abstract
The increasing need for environmental protection together with the concerns over the future availability of petrochemical feedstock have led to the design and development of new degradable thermoplastic materials, based on renewable resources that are more friendly to the environment than the conventially used petroleum-based plastics (Chapman, 1994; Fritz et al., 1995; Chiellini and Solaro, 1996; Krochta and De Mulder-Johnston, 1996).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Baumberger, S., Lapierre, C., Monties, B., Lourdin, D., and Colonna, B., 1997, Preparation and properties of thermally moulded and cast lignosulfonates-starch blends, Ind. Crops. Prod. 6: 253–258.
Baumberger, S., Lapierre, C., and Monties, B., 1998a, Utilization of pine kraft lignin in starch composites: impact of structural heterogeneity, J. Agric. Food Chem. 46: 2234–2240.
Baumberger, S., Lapierre, C., Monties, B., and Della Valle, G., 1998b, Use of kraft lignin as filler for starch films, Polym. Degrad. Stab. 59: 273–277.
Baumberger, S., 1999, Obtention et caractérisation de matériaux composites amidon-lignines, Ph.D. thesis, Institut National Agronomique (France).
Baumberger, S., Lapierre, C., Lora, J. H., and Monties, B, 1999, Novel utilization of wheat straw organosolv lignins in starch composites, Proceedings of the 1O th Int. Symp. Wood Pulp. Chem., Yokohama (Japan), Vol I, p. 680.
Baumberger, S., Michon, C., Cuvelier, G., and Lapierre, C., 2000, Lignin utilization in starch thermoplastics: towards molecular origin of polymer compatibility, Proceedings of the 6 th Europ. Workshop Lignocell. Pulps, Bordeaux (France), p. 121.
Bengs, H., 1998, Germain patent n°W09902596
Callegarin, F., Gallo, J-A Q., Debeaufort, F., and Voilley, A., 1997, Lipids and biopackaging, JAOCS, 74(10): 1183–1192.
Chang, Y. P., Cheah, P. B., and Seow, C. C., 2000, Plasticizing-antiplasticizing effects of water on physical properties of tapioca starch films in the glassy state, J. Food Sci. 65(3): 445–451.
Chapman, G. M., 1994, Status of technology and applications of degradable products, in: Polymers from Agricultural Coproducts, M. L. Fishman, R. B. Friedman and S. J. Huang, ed., ACS, Washington, pp. 29–47.
Chiellini, E. and Solaro, R., 1996, Biodegradable polymeric materials, Adv. Mater. 8(4): 305–313.
Doane, W. M, 1992, USDA Research on starch-based biodegradable plastics, Starch/Stärke, 44: 293–295.
Fang, Q. and Hanna, M. A., 2000, Functionnal properties of polylactic acid starch-based loose-fill packagingfoams, Cereal Chem. 77(6): 779–783.
Fengel, D. and Wegener, G., 1989, Wood: Chemistry, Ultrastructure,Reactions. Walter de Gruyter, Berlin, pp. 613.
Fishman, M. L., Coffin, D. R., Unruh, J. J., and Ly, T., 1996. Pectin/starch/glycerol films: blends or composites? J. Mat. Sci. Pure appl. Chem. A33: 639–654.
Fritz, H. G., Aichholzer, W., Seidenstcker, T., and Widmann, B., 1995, Abbaubare polymerwerkstoffe auf der basis nachwachsender rohstoffe-möglichkeiten und grenzen, Starch/stärke 47: 475–491.
Funke, U. and Lindhauer, G, 1994, Eigenschaften von Gießfilmen aus nativen und chemisch modifizierten Starken, Starch/stärke 46: 384–388.
Garcia, M. A., Martino, M. N., and Zaritzky, N. E., 2000, Lipid addition to improve barrier properties of edible starch-based films and coatings, J. Food Sci. 65(6): 941–947.
Hanggi, U. J., 1995, Requirements on bacterial polyesters as future substitute for conventional plastics for consumer goods, FEMS Microbiology Reviews 16: 213–220.
Jauregui, B., Munoz, M. E., and Santamaria, A., 1995, Dynamic viscoelastic properties of blends of poly(ethylene-co-vinyl acetate) and a modified starch, Macromol. Chem. Phys. 196: 3133–3142.
Kalichevsky, M. T. and Ring, S. G, 1987, Incompatibility of amylose and amylopectin in aqueous solution, Carbohydr. Res. 162: 323–328.
Ke, T. and Sun, X., 2000, Physical properties of poly(lactic) and starch composites with various blending ratios, Cereal Chem. 77(6): 761–768.
Kim, M. and Pometto, A. L., 1994, Food packaging potential of some novel biodegradable starch-polyethylene, J. Food Protection 57(11): 1007–1012.
Kosikowa, B., Demianova, V., and Kacurakova, M., 1993, Sulfur-free lignins as composites of polypropylene films, J. Appl. Polym. Sci. 47: 1065–1073.
Krochta, J. M. and De Mulder-Johnston, C. L. C., 1996, Biodegradable polymers from agricultural products, in: Agricultural Materials as Renewable Resources, G. Fuller, T. A. McKeon and D. D. Bills, ed., ACS, Washington, pp. 120–140.
Leloup, V., Colonna, P., and Buléon, A., 1991, Influence of amylose amylopectin ratio on gel properties, J. Cereal Sci. 13: 1–13.
Lim, S.-T. and Jane, J.-L, 1993, Preparation of water-resistant, biodegradable plastics with starch-zein mixtures in: Carbohydrates and Carbohydrate Polymer, M. Yalpani, ed., ATL Press, Mount Prospect, pp. 288–297.
Lourdin, D., Colonna, P., and Della Valle, G, 1995, Modes d’obtention de matériaux amylacées aux échelles laboratoire et pilote, in: Valorisations Non Alimentaires Des Grandes Productions Agricoles, J. Gueguen, ed., INRA, Nantes, pp. 241–248.
Lourdin, D., Bizot, H., and Colonna, P., 1997a, Correlation between static mechanical properties of starch-glycerol materials and low-temperature relaxation, Macromol. Symp. 114: 179–185.
Lourdin, D., Coignard, L., Bizot, H., and Colonna, P., 1997b, Influence of equilibrium relative humidity and plasticizer content on water content and glass transition of starch materials, Polymer 38: 5401–5406.
Monties, B. 1988, Preparation of dioxane lignin fractions by acidolysis, in: Methods in enzymology, W. A. Wood and S. T. Kellogg, ed., Academic Press, New York, pp. 31–34.
Mörck, R., Reimann, A., and Kringstad, K. P, 1988, Fractionation of kraft lignin by successive extraction with organic solvents. III. Fractionation of kraft lignin from birch, Holzforschung 42: 111–116.
Muzzarelli, R. and Bari, P., 1994, Chitosans carrying the methoxyphenyl functions typical of lignin, Carbohydr. Polym. 23: 155–160.
Otey, F., Westhoff, R. P., and Doane, W. M, 1987. Starch-based blown films, Ind. Eng. Chem. Res. 26: 1659–1663.
Protzman, T. F., Wagoner, J. A., and Young, A. H, 1967, Process of casting amylose films, U.S. patent n° 3,344,216.
Rivard, C., Moens, L., Roberts, K., Brigham, J., and Kelley, S, 1995. Starch esters as biodegradable plastics: effects of ester group chain length and degree of substitution on anaerobic biodegradation, Enzyme and Microbial Technology 17: 848–852.
Rutlege, D. N., Barros, A. S., Vackier, M. C., Baumberger, S., and Lapierre, C., 1999, Analysis of time domain NMR and other signals, in: Advances in Magnetic Resonance in Food Science, P. S. Belton, B. P. Hills, and G. A. Webb, ed., Royal Society of Chemistry, Cambridge, pp. 203.
van Soest, J. J. G, 1996. Starch plastics: structure-property relationships, Ph.D. thesis, Utrecht University (The Netherlands).
Shogren, R. L., Swanson, C. L., and Thompson, A. R., 1992, Extrudates of cornstarch with urea and glycols: structure/mechanical property relations, Starch/Stärke 44: 335–338.
Simionescu, C. I., Macoveanu, M. M., Vasile, C., Ciobanu, F., Esanu, M., Ioanid, A., Vidrascu, P., and Georgescu-Buruntea, N., 1996, Polyolefins/lignosulfonates blends, Cellulose Chem. Technol. 30: 411–429.
Volperts, A., Dizhbite, T., Telysheva, G., Odermatt, J., Lehnen, R., and Faix, O., 2001, Miscibility of ligninpolymer blends as detected by differential scanning calorimetry (DSC), Proceedings of the 11th Int. Symp. Wood Pulp Chem. Nice (France), p 203–206.
Whistler, R. L., 1965, Fractionation of starch, in: Starch: Chemistry and Technology, R. L. Whistler and E. F. Paschall, ed., Academic Press, New York-London, pp. 331–347.
Yao, Y., Yoshioka, M., and Shiraishi, N., 1995, Rigid polyurethane foams from combined liquefaction mixtures of wood and starch, Mokuzai Gakkaishi 41(7): 659–668.
Yao, Y., Yoshioka, M., and Shiraishi, N., 1994, Soluble properties of liquefied biomass prepared in organic solvents, Mokuzai Gakkaishi 40(2): 176–184.
Yao, Y., Yoshioka, M., and Shiraishi, N., 1993, Combined liquefaction of wood and starch in a polyethylene glycol/glycerin blended solvent, Mokuzai Gakkaishi 39(8): 930–938.
Zobel, H. F., and Stephen, A. M, 1995. Starch: structure, analysis, and application, in: Food Polysaccharides and Their Applications, A. M. Stephen, ed., Marcel Dekker, New York, pp. 19–66.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer Science+Business Media New York
About this chapter
Cite this chapter
Baumberger, S. (2002). Starch-Lignin Films. In: Hu, T.Q. (eds) Chemical Modification, Properties, and Usage of Lignin. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-0643-0_1
Download citation
DOI: https://doi.org/10.1007/978-1-4615-0643-0_1
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-5173-3
Online ISBN: 978-1-4615-0643-0
eBook Packages: Springer Book Archive