Abstract
Metallized plastics are used extensively in applications ranging from food packing to microelectronics1,2. Particularly the latter field has stimulated intensive research throughout the last decades1–6. In view of the great need for further miniaturization and reduction of propagation delay in future device generations aluminum will increasingly be replaced by the lower resistivity copper, and polymers are seen as potential low-permittivity (low-k) dielectrics even for on-chip interconnect5,6. First chips involving Cu and the polymer SiLK® (DuPont7) have already been fabricated by IBM8.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Metallized Plastics: Fundamentals and Applications, edited by K. L. Mittal (Marcel Dekker, New York, 1998).
S.P. Kowalczyk, in Metallization of Polymers, edited by E. Sacher, J. Pireaux and S.P. Kowalczyk (ACS Symposium Series 440, American Chem. Soc., Washington DC, 1990) p. 10.
Polymers for Electronic and Photonic Applications, edited by C. P. Wong (Academic Press, Boston, 1993).
Polyimides: Fundamental Aspects and Technological Applications, edited by M. Ghosh and K. L. Mittal (Marcel Dekker, New York, 1996).
M. T. Bohr, IEEE IEDM, 241 (1995).
Low-Dielectric Constant Materials and Applications in Microelectronics IV, edited by C. Chiang, P. S. Ho, T.-M. Lu and J. Wetzel, Mat. Res. Soc. Symp. Proc. 511 (1998).
P. H. Townsend, S. J. Martin, J. Godschalx, D. R. Romer, D. W. Smith, Jr.,D. Castillo, R. deVries, G. Buske, N. Rondan, S. Froelicher, J. Marshall, E. O. Shaffer, and J-H. Im, Mat. Res. Sco. Symp. Proc., 476,9 (1997).
European Smiconductor, May 2000, 7.
P. S. Ho, R. Haight, R. C. White, B. D. Silverman and F. Faupel, in Fundamentals of Adhesion, edited by L. H. Lee, (Plenum Press, New York, 1991) p. 383.
R. M. Tromp, F. K. LeGoues and P. S. Ho, J. Vac. Sci. Technol. A 3, 782 (1985).
F. K. LeGoues, B. D. Silverman and P. S. Ho, J. Vac. Sci. Technol. A 6, 2200 (1988).
S. P. Kowalczyk, Y. H. Kim, G. F. Walker and J. Kim, Appl. Phys. Lett. 52, 375 (1988).
F. Faupel, in Polymer-Solid Interfaces, edited by J. J. Pireaux, P. Bertrand and J. L. Bredas (IOP Publishing, 1992) p. 171.
F. Faupel, R. Willecke and A. Thran, Mater. Sci. Eng. R. 22, 155 (1998).
M. Kiene, T. Strunskus, R. Peter, and F. Faupel, Adv. Mater.10, 1357 (1998).
Y. Inoue, M. Inata, M. Fujii, S. Hayashi, K. Yamamoto, Thin Solid Films 372, 169 (2000).
R. M. Joyce-Wöhrmann, T. Hentschel, H. Münstedt. Adv. Eng. Mater., 2 (6), 380386, (2000).
S. Nie, S. R. Emory, Science, 275, 1102 (1997).
G. J. Kovacs and P. S. Vincett, J. of Colloid and Interface Sci., 90,335 (1982).
G. J. Kovacs and P. S. Vincett, C. Tremblay and A. L. Pundsack, Thin Solid Films, 101, 21(1983).
C. v. Bechtolsheim, V. Zaporojtchenko, and F. Faupel, Appl. Surf. Sci., 151 (2000), 12, 119 128.
S. P. Kowalczyk, Y. H. Kim, G. F. Walker, and J. Kim, Appl. Phys. Lett. 52, 375 (1988).
D. J. Godbey, L. J. Buckley, A. P. Purdy, and A. W. Snow, Thin Solid Films 308309,470 (1997).
see, e.g., K. D. Rendulic, Surface Science272, 34 (1992).
A. Thran, M. Kiene, V. Zaporojtchenko, and F. Faupel, Phys. Rev. Lett. 82, 1903 (1999).
V. Zaporojtchenko, K. Behnke, A. Thran, T. Strunskus, and F. Faupel, Appl. Surf. Sci. 144145, 355 (1999).
V. Zaporojtchenko, K. Behnke, T. Strunskus, and F. Faupel, Surf. a. Interf. Anal. 30, 439443 (2000).
V. Zaporojtchenko, J. Erichsen, T. Strunskus, K. Behnke, F. Faupel, M. Baklanov and K. Maex to be published in MRS Proceedings Symposium L (2001).
V. Zaporojtchenko, J. Erichsen, J. Zekonyte, A. Thran, T. Strunskus, and F. Faupel, in this proceedings
J. A. Venables, Surf. Sci. 299300, 798 (1994).
R. Poteau, J. L. Heully, and F. Spiegelmannn, Z. Phys. D 40, 479 (1997).
F. Faupel, Adv. Mater. 2, 266 (1990).
F. Faupel and G. Kroll, in: Diffusion in Non-Metallic Solids, Landolt-Börnstein, New Series, W. Martienssen (Ed. in Chief), Volume III/33B1, D. L. Beke (Ed.), Springer-Verlag, Berlin, Heidelberg, New York 1999.
N. J. DiNardo, Metallized Plastics 1: Fundamental and Applied Aspects, edited by K. L. Mittal and J. R. Susko (Plenum Press, New York, 1989).
L. J. Matienzo and W. J. Unertl, in Polyimides: Fundamental Aspects and Technological Applications, edited by M. Ghosh and K. L. Mittal (Marcel Dekker, New York, 1996).
T. Strunskus, M. Grunze, G. Kochendoerfer and Ch. Wöll, Langmuir, 12, 2712 (1996).
H. M. Meyer, S. G. Anderson, Lj. Atanasoska and J. H. Weaver, J. Vac. Sci. Technol. A 6, 30; 1002 (1988).
N. J. DiNardo, J. E. Demuth and T. C. Clarke, Chem. Phys. Lett., 121, 239 (1985).
J. L. Jordan-Sweet in Metallization of Polymers, edited by E. Sacher, J. Pireaux and S.P. Kowalczyk (ACS Symposium Series 440, American Chem. Soc., Washington DC, 1990).
A. R. Rossi and B. D. Silverman in J. H. Lupinski and R. S. Moore (eds.), Polymeric Materials for Electronic Packaging and Interconnection, ACS Symposium Series 407, American Chemical Society, Washington DC (1989).
L. J. Gerenser, J. Vac. Sci. Technol. A 8, 3682 (1990).
A. J. Pertsin, Y. M. Pashunin, Appl. Surf. Sci., 47, 115 (1991).
G. D. Davis, B. J. Rees, P. L. Whisnant, J. Vac. Sci. Technol. A 12, 2378 (1994).
T. Strunskus, M. Kiene, R. Willecke, A. Thran, C. v. Bechtolsheim and F. Faupel, Materials and Corrosion 49, 180 (1998).
J. J. Pireaux, C. Grégoire, M. Vermeersch, P. A. Thiry, M. R. Vilar and R. Caudano in E. Sacher, J. Pireaux, and S.P. Kowalczyk (eds.), Metallization of Polymers, ACS Symposium Series 440, American Chem. Soc., Washington DC, p.47 (1990).
F. S. Ohuchi and S. C. Freilich, J. Vac. Sci. Technol. A 4, 1039 (1984); A 6, 1004 (1988).
W. N. Unertl, High Performance Polymers 2, 15 (1990).
S. C. Freilich and F. S. Farnsworth, Polymer 28, 1912 (1987).
J. G. Clabes, J. Vac. Sci. Technol. A 6, 2887 (1988).
L. Atanasoska, S. G. Anderson, H. M. Meyer, Z. Lin and J. H. Weaver, J. Vac. Sci. Technol. A 5, 3325 (1987).
P. S. Ho, P. O. Hahn, J. W. Bartha, G. W. Rubloff, F. K. LeGoues and B. D. Silverman, J Vac. Sci. Technol. A 3, 739 (1985).
J. J. Pireaux, M. Vermeersch, C. Grégoire, P. A. Thiry, R. Caudano and T. C. Clarke, J. Chem. Phys. 88, 3353 (1988).
S. G. Anderson, H. M. Meyer, and J. H. Weaver, J. Vac. Sci. Technol. A6, 2205 (1988).
P. O. Hahn, G. W. Rubloff, J. W. Bartha, F. K. LeGoues and P. S. Ho, Mat. Res. Soc. Symp. Proc, 40, 251 (1985).
J. G. Clabes, M. J. Goldberg, A. Viehbeck and C. A. Kovac, J. Vac. Sci. Technol. A 6, 985 (1988).
M. Kiene, H. Kiesbye, T. Strunskus, and F. Faupel, to be published.
M. Kiene, T. Strunskus, and F. Faupel in Metallized Plastics: Fundamentals and Applications, edited by K. L. Mittal (Marcel Dekker, New York, 1998).
R. G. Mack, E. Grossman and W. N. Unertl, J. Vac. Sci. Technol. A 8, 3827 (1990).
M. Fontaine, J. M. Layet, C. Grégoire and J. J. Pireaux, Appl. Phys. Lett. 62, 2938 (1993).
A. Foitzik and F. Faupel, Mater. Res. Soc. Symp. Proc.203, 59 (1991).
F. Faupel, phys. stat. sol. (a) 134, 9 (1992).
C. v. Bechtolsheim, V. Zaporojtchenko, and F. Faupel, J. Mater. Res., 14, 9 (1999).
F. Faupel, P. W. Hüppe, K. Rätzke, R. Willecke and T. Hehenkamp, J. Vac. Sci. Technol. A 10, 92 (1992).
F. Faupel, D. Gupta, B. D. Silverman and P. S. Ho, Appl. Phys. Lett. 55, 357 (1989).
D. Gupta, F. Faupel and R. Willecke, in Diffusion in Amorphous Materials, edited by H. Jainand and D. Gupta (The Minerals, Metals &Materials Society, 1994) p. 189.
R. Willecke and F. Faupel, Macromolecules 30, 567573 (1997).
R. Willecke and F. Faupel, J. Polym. Sci. Polym. Phys. Ed. 35, 1043 (1997).
A. Thran and F. Faupel, Defect and Diffusion Forum 143147 (1), 903 (1997).
B. D. Silverman, Macromolecules 24, 2467 (1991).
L. Tröger, H. Hünnefeld, S. Nunes, M. Oehring, and D. Fritsch, J. Phys. Chem. B 101, 1279 (1997).
A. Thran, F. Faupel, to be published.
D. Gupta, in Diffusion in Thin Films, Encyclopedia Appl. Phys., 5, (VCH Pub. Inc., New York, 1993), p 75.
R. Willecke, PhD thesis, University of Göttingen, 1993.
J. H. Das and J. E. Morris, J. Appl. Phys. 66, 5816 (1989).
N. Y. Kim, H.-S. Yoon, S. Y. Kim, C. N. Whang, K. W. Kim, and S. J. Cho, J. Vac. Sci. Technol. B, 17, 380 (1999).
M. Du, R. L. Opila, V. M. Donnelly, J. Sapjeta, and T. Boone, J. Appl. Phys. 85, 1496 (1999).
J. H. Das and J. E. Morris, IEEE Transactions on Components, Packaging and Manufacturing Technology B 17, 620 (1994).
D. Popovici, K. Piyakis, M. Meunier and E. Sacher, J. Appl. Phys. 83, 108 (1998).
N. Marin, Y. Serruys and P. Calmon, Nuclear Instr. and Methods in Physics Research B 108, 179 (1996).
M. Kiene, PhD thesis, University of Kiel, 1997.
S. S. Wong, A. L. S. Loke, J. T. Wetzel, P. H. Townsend, R. N. Vrtis, M. P. Zussman, in Ref. 9.
A. L. S. Loke, J. T. Wetzel, C. Ryu, W.-J. Lee and S. S. Wong, Symposium on VLSI Technology, Honolulu, 1998.
J. M. Neirynck, R. J. Gutmann, and S. P. Murarka, Proc. CMP-MIC Conference IMIC 1999, p. 192.
D.C. Allara; S. Arte and A. N. Parikh, in Polymer Surfaces and Interfaces, edited by W. J. Feast; H. S. Munrom, and R. W. Richards, Wiley &Sons: New York, 1993.
A. M. Mayes, Macromolecules (1994), 27, 3114.
J. Baschnagel, and K. Binder, K. Macromolecules, 28, 6808 (1995).
Y. C.Jean, R. Zhang,; H. Cao, J.-P. Yuan, C.-M Huang,. B. Nielsen, P. Asoka-Kumar, Phys.Rev. B, , 56, R8459(1997).
N. Satomi, A. Takahara, and T. Kajiyama, Macromolecules, 32, 4474 (1999).
J. A. Forrest, J. Mattsson, Phys. Rev. E,61 (1), 53 (2000).
W. E. Wallace, J. H. van Zanten, and W.L. Wu, Phys. Rev. B, 52, R3329 (1995).
V. Zaporqjtchenko, T. Strunskus, J. Erichsen, and F. Faupel, Macromolecules, 5, 1125(2001).
V. Zaporqjtchenko, T. Strunskus, K. Behnke, C. v. Bechtolsheim, M. Kiene, and F. Faupel, J. Adhesion Sci. Technol., 14, 3, 467(2000).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer Science+Business Media New York
About this chapter
Cite this chapter
Faupel, F. et al. (2002). Fundamental Aspects of Polymer Metallization. In: Sacher, E. (eds) Metallization of Polymers 2. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-0563-1_8
Download citation
DOI: https://doi.org/10.1007/978-1-4615-0563-1_8
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-5134-4
Online ISBN: 978-1-4615-0563-1
eBook Packages: Springer Book Archive