Abstract
This book chapter discusses results from Life Cycle Assessment (LCA) studies for the commercially most important biopolymers. Biopolymers are defined here as polymers that are fully or partially produced from renewable raw materials, covering both biodegradable and non-degradable polymers.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
ECCP (European Climate Change Programme), 2001, Long report. http://europa.eu.int/comm/environment/climat/eccp_longreport_0106.pdf, Brussels, Belgium.
ISO (1997-1999), International Organisation for Standardisation: — ISO 14 040 (DIN EN ISO 14040), 1997, Environmental Management — Life Cycle Assessment — Principles and Framework. Berlin: DIN (Deutsches Institut für Normung).-EN ISO 14 041, 1998, Environmental Management — Life Cycle Assessment — Goal and scope definition and inventory analysis. Berlin: DIN (Deutsches Institut für Normung). — EN ISO 14 042, 1998, Environmental Management — Life Cycle Assessment — Life Cycle Impact Assessment. Draft. Berlin: DIN (Deutsches Institut für Normung). — EN ISO 14 043. 1999, Environmental Management — Life Cycle Assessment — Life Cycle Interpretation. Draft. Berlin: DIN (Deutsches Institut für Normung).
CARBOTECH (1996): Dinkel, F., Pohl, C., Ros, M., Waldeck, B., Ökobilanz stärkehaltiger Kunststoffe (Nr. 271), 2 volumes. Commissioned by the Bundesamt für Umwelt und Landschaft (BUWAL), Bern, Switzerland.
Kaltschmitt, M., and Reinhardt, G. A., 1997, Nachwachsende Energieträger-Grundlagen, Verfahren, Ökologische Bilanzierung. Vieweg Publishers, Braunschweig/Wiesbaden, Germany
BIFA/IFEU/Flo-Pak, 2001, Kunststoffe aus nachwachsenden Rohstoffen — Vergleichende Ökobilanz für Loose-fill-Packmittel aus Stärke bzw. aus Polystyrol (confidential interim report). Bayrisches Institut für angewandte Umweltforschung und-technik, Augsburg (BIFA, project leader), Institut für Energie-und Umweltforschung Heidelberg (IFEU), Flo-Pak GmbH, Germany
Geier, U., Frieben, B., Haas, G., Molkenthin, V., and Köpke, U., 1998, Ökobilanz Hamburger Landwirtschaft — Umweltrelevanz verschiedener Produktionsweisen, Handlungsfelder Hamburger Umweltpolitik. Prepared by the Institute of Organic Agriculture of the Rheinische Friedrich-Wilhelm-Universität Bonn, Part 1. Schriftenreihe für organischen Landbau, Verlag Dr. Köster, Berlin
Kopf, N., 1999, Kunststoffe aus nachwachsenden Rohstoffen — Polyhydroxybutyrat und Stärkekunststoffe — Abschätzungen zum kumulierten Energieaufwand und zu CO 2-Emissionen. Student’s report, prepared at the Fraunhofer Institute for Systems and Innovation Research (FhG-ISI), Karlsruhe for Engler-Bunte-Institut at Karlsruhe University. Karlsruhe, Germany
Meuser, F., German, H., 1981, Enrgiebedarf und Energiefluss einer Kartoffelstärkefabrik. Starch/Stärke 33(10): 332–337
Winter, D., Fürniß, B., Klein-Vielhauer, S., Leible, L., Nieke, E., Rösch, Ch., and Taugen, H., 1993, TFA (Technologiefolgenabschätzung zum Thema Nachwachsende Rohstoffe), Landwirschaftsverlag, Münster, Germany
Patel, M., Bastioli, C., Marini, L., and Würdinger, E., 2003, Life-cycle assessment of bio-based polymers and natural fibres. In Biopolymers, Vol. 10, Wiley-VCH, forthcoming in 2003, see also downloadable documents on http://www.chem.uu.nl/nws/www/nws.html
Fraunhofer ISI, 1999, C-STREAMS — Estimation of material, energy and CO2 flows for model systems in the context of non-energy use, from a life cycle perspective — Status and scenarios. Volume I: Estimates for the total system (in German, English abstract). M. Patel, E. Jochem, F. Marscheider-Weidemann, P. Radgen, N. von Thienen, Karlsruhe, Germany
APME (1999, 2000) Eco-profiles of plastics and related intermediates (about 55 products). Association of Plastics Manufacturers in Europe (APME). Downloadable from the internet (http://lca.apme.org), Brussels, Belgium
COMPOSTO (July 2000): Life cycle assessment of Mater-Bi and EPS loose fills. Study prepared by by R. Estermann, B. Schwarzwälder and B. Gysin, Composto, for Novamont, Olten, Switzerland for Novamont, Novara, Italy
COMPOSTO (September 1998): Life cycle assessment of Mater-Bi bags for the collection of compostable waste. Study prepared by R. Estermann and B. Schwarzwälder, Composto, Olten, Switzerland for Novamont, Novara, Italy
CARGILL DOW, 2001, NatureWorks-A new generation of biopolymers. Presentation by E. Vink on 29 March 2001, Birmingham, United Kingdom
Gerngross, T. U., and Slater, S., 2000, How Green are Green Plastics? Scientific American, August, 2000, pp. 37–41
Heyde, M., 1998, Ecological considerations on the use and production of biosynthetic and synthetic biodegradable polymers. Polym. Degrad. Stab. 59(1-3): 3–6.
Kosbar, L. L., Gelorme, J. D., Japp, R. M., and Fotorny, W. T., 2001, Introducing biobased materials into the electronics industry. J. Ind. Ecol. 4(3): 93–105.
Diehlmann, A., Kreisel, G., 2000, Ökologische Bilanzierung ausgewählter Lackrohstoffe: Vergleich von Bindemitteln auf nativer und petrochemischer Basis. ITUC (Institute for Technical Chemistry and Environmental Chemistry), Jena University, Germany, pp. 95
Diener, J., and Siehler, U., 1999, Ökologischer Vergleich von NMT-und GMT-Bauteilen. Angew. Makromol. Chem. 272: 1–4.
Wötzel, K., Wirth, R., and Flake, R., 1999, Life cycle studies on hemp fibre reinforced components and ABS for automotive parts. Angew. Makromol. Chem. 272: 121–127.
Heijungs, R., Guinee, J. B., Huppes, G., Lankreijer, R. M., Udo de Haes, H. A., Wegener, and Sleeswijk, A., 1992, CML (Centre for Environmental Science Leiden), Netherlands Organisation for Applied Scientific Research (TNO), Fuels and Raw Materials Bureau (B&G): Environmental Life-Cycle Assessment of Products — Guide and Background. Leiden, Netherlands
Schleiss, K., and Chardonnens, M., 1994, Stand und Entwicklung der Kompostierung in der Schweiz 1993. BUWAL Umwelt-Materialien Nr. 21. Bundesamt für Umwelt, Wald und Landschaft (BUWAL), Bern, Switzerland
Hauspurg, Ch., Reußmann, T., and Mieck, K.-P., 2000, Recycling von Naturfaserverbundwerkstoffen im Plastifizier-Pressverfahren. GAK 8/2000, Jahrgang 53, 523–527.
Climate Change 2001 — The scientific basis, 2001 (Houghton, J. T., Ding, Y., Griggs, D. J., Noguer, M., van der Linden, P. J., Da, X., Maskell, K., and Johnson, C. A., eds.), Contribution of Working Group I to the Third Assessment Report of the Intergovernmental Panel on Climate Change (IPCC). Full text downloadable from www.ipcc.ch.
Patel, M., 1999, PhD thesis Closing Carbon Cycles: Carbon use for materials in the context of resource efficiency and climate change. (ISBN 90-73958-51-2, http://www.library.uu.n1/digiarchief/dip/diss/1894529/inhoud.htm), Utrecht University, Utrecht, Netherlands.
Reimann, D. O., and Hämmerli, H., 1995, Verbrennungstechnik für Abfälle in Theorie und Praxis. Schriftenreihe Umweltschutz, Bamberg, p. 246.
Patel, M., 2003, Environmental life cycle comparisons of biodegradable plastics. In Handbook on Biodegradable Materials (C. Bastioli, ed.), RAPRA Technology Ltd., forthcoming in 2003.
FAT/CARBOTECH, 1997, Beurteilung nachwachsender Rohstoffe in der Schweiz in den Jahren 1993-1996 — Vergleichende Betrachtung von Produkten aus ausgewählten nachwachsenden Rohstoffen und entsprechenden konventionellen Produkten bezüglich Umweltwirkungen und Wirtschaftlichkeit, (U. Wolfensberger and F. Dinkel, eds.). Prepared by FAT (Eidgenössische Forschungsanstalt für Agrarwirtschaft und Landtechnik) and CARBOTECH for the Federal Office of Agriculture, Bern, Switzerland.
Corbière-Nicollier, T., Gfeller Laban, B., Lundquist, L., Leterrier, Y. Manson, J.-A.E., and Jolliet, O., 2001, Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics. Swiss Federal Institute of Technology, Lausanne, Switzerland. Resour. Conserv. Recy. 33: 267–287.
Finnveden, G., 2000, On the limitations of life cycle assessment and environmental system analysis tools in general. Int. J. Life Cycle Assess. 5(4): 229–238.
Kurdikar, D., Paster, M., Gruys, K. J., Fournet, L., Gerngross, T. U., Slater, S. C., and Coulon, R., 2001, Greenhouse gas profile of a plastic derived from a genetically modified plant. J. Ind. Ecology. 4(3): 107–122.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2003 Springer Science+Business Media New York
About this paper
Cite this paper
Patel, M. (2003). Do Biopolymers Fulfill Our Expectations Concerning Environmental Benefits?. In: Chiellini, E., Solaro, R. (eds) Biodegradable Polymers and Plastics. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-9240-6_7
Download citation
DOI: https://doi.org/10.1007/978-1-4419-9240-6_7
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-4854-2
Online ISBN: 978-1-4419-9240-6
eBook Packages: Springer Book Archive