Abstract
As the microelectronic industry advances to Pb-free solders due to environmental concerns, electromigration (EM) has become a critical issue for finepitch packaging as the diameter of the solder bump continues decreasing and the current that each bump carries keeps rising owing to higher performance requirement of electronic devices. As stated in 2003 International Technology Roadmap for Semiconductors (ITRS), the EM is expected to be the limiting factor for high-density packages. This paper reviews general background of EM, current understanding of EM in solder joints, and technical hurdles to be addressed as well as possible solutions. It is found that the EM lifetimes of Pb-free solder bumps are between the high-Pb and the eutectic composition under the same testing condition. However, our simulation results show that the electrical and thermal characteristics remain essentially almost the same during accelerated EM tests when the Pb-containing solders are replaced by Pb-free solders, suggesting that the melting points of the solders are likely the dominant factor in determining EM lifetimes. The EM behavior in Pb-free solder is a complicated phenomenon as multiple driving forces coexist in the joints and each joint contains more than four elements with distinct susceptibility to each driving force. Therefore, atomic transport due to electrical and thermal driving forces during EM is also investigated. In addition, several approaches are presented to reduce undesirable current crowding and Joule heating effects to improve EM resistance.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
K.N. Tu, J. Appl. Phys. 94, 5451 (2003)
H.B. Huntigton, A.R. Grone, J. Phys. Chem. Solids 20, 76 (1961)
K. Zeng, K.N. Tu, Mater. Sci. Eng. Rep. R38, 55 (2002)
S. Brandenburg, S. Yeh, in Proceedings of Surface Mount International Conference and Exhibition, SM198, San Jose, CA, 23–27 August 1998, p. 337
C.Y. Liu, C. Chen, K.N. Tu, J. Appl. Phys 88, 5703 (2000)
Q.T. Huynh, C.Y. Liu, C. Chen, K.N. Tu, J. Appl. Phys. 89, 4332 (2001)
E.C.C. Yeh, W.J. Choi, K.N. Tu, P. Elenius, H. Balkan, Appl. Phys. Lett. 80, 580 (2002)
T.L. Shao, S.-W. Liang, T.C. Lin, C. Chen, J. Appl. Phys. 98, 044509 (2005)
S. H. Chiu, T.L. Shao, C. Chen, D.J. Yao, C.Y. Hsu, Appl. Phys. Lett. 88, 022110 (2006)
H. Ye, C. Basaran, D. Hopkins, Appl. Phys. Lett. 82, 7 (2003)
A.T. Huang, A.M. Gusak, K.N. Tu, Y.-S. Lai, Appl. Phys. Lett. 88, 141911 (2006)
Y.H. Lin, Y.C. Hu, C.M. Tsai, C.R. Kao, K.N. Tu, Acta Mater. 53, 2029 (2005)
J.W. Nah, K.W. Paik, J.O. Suh, K.N. Tu, J. Appl. Phys. 94, 7560 (2003)
J. D. Wu, C.W. Lee, P. J. Zheng, J. C.B. Lee, S. Li, in Proceedings of the 54th Electronic Components and Technology Conference, IEEE Components, Packaging, and Manufacturing Technology Society, Las Vegas, NV, 2004, p. 961
S. Gee, N. Kelkar, J. Huang, K. N. Tu, in Proceedings of IPACK2005, ASME InterPACK 2005, San Francisco, CA, USA, 2005
W.J. Choi, E.C.C. Yeh, K.N. Tu, J. Appl. Phys. 94, 5665 (2003)
T.L. Shao, S.H. Chiu, C. Chen, D.J. Yao, C.Y. Hsu, J. Electron. Mater. 33(11), 1350 (2004)
Y-S. Lai, K.M. Chen, C.W. Lee, C.L. Kao, Y.H. Shao, in Proceedings of EPTC 2005, 7th Electronics Packaging Technology Conference, Singapore, 2005, p. 786
T.Y. Lee, W.J. Choi, K.N. Tu, J.W. Jang, S.M. Kuo, J.K. Lin, D.R. Frear, K. Zeng, J.K. Kivilahti, J. Mater. Res. 17(2), 291 (2002)
A.A. Liu, H.K. Kim, K.N. Tu, P.A. Totta, J. Appl. Phys. 80(5), 2774 (1996)
S.W. Chen, C.M. Chen, W.C. Liu, J. Electron. Mater. 27(11), 1193–1198 (1998)
T.L. Shao, Y.H. Chen, S.H. Chiu, C. Chen, J. Appl. Phys. 96(8), 4518 (2004)
Y.H. Chen, T.L. Shao, P.C. Liu, C. Chen, T. Chou, J. Mater. Res. 20(9), 2432–2442 (2005)
G.A. Rinne, Microelectron. Reliab. 43, 1975 (2003)
S.H. Chiu, S.W. Liang, C. Chen, D.J. Yao, Y.C. Liu, K.H. Chen, S.H. Lin, in Proceedings of the 56th Electronic Components and Technology Conference, IEEE Components, Packaging, and Manufacturing Technology Society, San Diego, CA, 2006
J.R. Black, IEEE Trans. Electron. Devices ED 16(4), 338 (1969)
S.W. Liang, T.L. Shao, C. Chen, E.C.C. Yeh, K.N. Tu, J. Mater. Res. 21(1), 137 (2006)
C.Y. Hsu, D.J. Yao, S.W. Liang, C. Chen, J. Electron. Mater. 35, 947 (2006)
J.W. Nah, J.O. Suh, K.N. Tu, S.W. Yoon, C.T. Chong, V. Kripesh, B.R. Su, C. Chen, in Proceedings of the 56th Electronic Components and Technology Conference, IEEE Components, Packaging, and Manufacturing Technology Society, San Diego, CA, 2006
Y.H. Lin, C.M. Tsai, Y.C. Hu, Y.L. Lin, C.R. Kao, J. Electron. Mater. 34(1), 27 (2005)
J.K. Lin, J.W. Jang, J. White, in Proceedings of the 53th Electronic Components and Technology Conference, IEEE Components, Packaging, and Manufacturing Technology Society, New Orleans, USA 2006, p. 816
P.G. Kim, J.W. Jang, T.Y. Lee, K.N. Tu, J. Appl. Phys. 86, 6746–6751 (1999)
A.T. Wu, A.M. Gusak, K.N. Tu, C.R. Kao, Appl. Phys. Lett. 86, 241902 (2005)
A.T. Wu, J.R. Lloyd, N. Tamura, B.C. Valek, K.N. Tu, C.R. Kao, Appl. Phys. Lett. 85(13), 2490 (2004)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Chen, C., Liang, S.W. (2006). Electromigration issues in lead-free solder joints. In: Lead-Free Electronic Solders. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-48433-4_17
Download citation
DOI: https://doi.org/10.1007/978-0-387-48433-4_17
Published:
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-48431-0
Online ISBN: 978-0-387-48433-4
eBook Packages: EngineeringEngineering (R0)