Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
- Martensitic Transformation
- Shape Memory Alloy
- Transformation Temperature
- Shape Recovery
- Martensitic Variant
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
C. M. Jackson, H. J. Wagner, R. J. Wasilewski, 55- Nitinol — The alloy with a memory: Its physical metallurgy, properties and applications, Tech. Rep. NASA SP-5110, NASA Technology Utilization Office, Washington, D.C. (1972).
T. Duerig, K. Melton, D. Stockel, C. Wayman (Eds.), Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann, London, 1990.
J. Perkins, Shape Memory Effects in Alloys, Plenum Press, New York, 1975.
H. Funakubo (Ed.), Shape Memory Alloys, Gordon and Breach Science Publishers, 1987.
K. Otsuka, C. M. Wayman (Eds.), Shape Memory Materials, Cambridge University Press, Cambridge, 1999.
G. V. Kurdjumov, L. G. Khandros, First reports of the thermoelastic behaviour of the martensitic phase of A u- C d alloys, Doklady Akademii Nauk SSSR 66 (1949) 211–213.
W. J. Buehler, J. V. Gilfrich, R. C. Wiley, Effects of low-temperature phase changes on the mechanical properties of alloys near composition TiNi, Journal of Applied Physics 34 (1963) 1475.
F. E. Wang, W. J. Buehler, S. J. Pickart, Crystal structure and a unique “martensitic” transition of TiNi, Journal of Applied Physics 36 (3232-3239).
L. Schetky, Shape-memory alloys, Scientific American 241 (74-82).
M. Wayman, J. Harrison, The origins of the shape memory effect, Journal of Minerals, Metals, and Materials 41 (99) (1989) 26–28.
M. H. Wu, L. M. Schetky, Industrial applications for shape memory alloys, in: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, California, 2000.
H. C. Doonkersloot, V. Vucht, Martensitic transformations in Au-Ti, Pd-Ti and Pt-Ti alloys, Journal of Less-Common Metals 20 (1970)83–91.
K. Melton, O. Mercier, Deformation behavior of NiTi-based alloys, Metallic Tras. 9A (1978) 1487–14488.
S. Miyazaki, K. Mizukoshi, T. Ueki, T. Sakuma, Y. Liu, Fatigue life of Ti-50 at. Materials Science and Engineering (1999) 658–663.
K. Ullakko, J. K. Huang, C. Kantner, R. C. O’Handley, V. V. Kokorin, Large magnetic-field-induced strains in Ni_2MnGa single crystals, Applied Physics Letters 69 (13) (1996) 1966–1968.
H. E. Karaca, I. Karaman, B. Basaran, Y. I. Chumlyakov, H. J. Maier, Magnetic field and stress induced martensite reorientation in NiMnGa ferromagnetic shape memory alloy single crystals, Acta Materialia 54 (1) (2006) 233–245.
L. Contardo, G. Guenin, Training and two way memory effect in Cu-Zn-Al alloy, Acta Metallurgica 38 (7) (1990) 1267–1272.
D. A. Miller, D. C. Lagoudas, Thermo-mechanical characterization of NiTiCu and NiTi SMA actuators: Influence of plastic strains, Smart Materials and Structures 9 (5) (2000) 640–652.
X. Ren, K. Otsuka, Universal symmetry property of point defects in crystals, Physical Review Letters 85 (5) (2000) 1016–1019.
P. Rodriguez, G. Guenin, Stability of the two way memory effect during thermal cycling of a high ms temperature Cu-Al-Ni alloy, Materials Science Forum 56–58 (2) (1990) 541–546.
D. A. Miller, D. C. Lagoudas, Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi , Material Science & Engineering A 308 (2001) 161–175.
K. N. Melton, O. Mercier, Fatigue of NiTi thermoelastic martensites, Acta Metallurgica 27 (1979) 137–144.
H. Tobushi, T. Hachisuka, S. Yamada, P. H. Lin, Rotating-bending fatigue of a TiNi shape-memory alloy wire, Mechanics of Materials 26 (1997) 35–42.
J. L. McNichols, P. C. Brooks, NiTi fatigue behavior, Journal of Applied Physics 52 (1981) 7442–7444.
H. Tobushi, T. Hachisuka, T. Hashimoto, S. Yamada, Cyclic deformation and fatigue of a TiNi shape memory alloy wire subjected to rotating bending, Journal of Engineering Materials and Technology 120 (1998) 64–70.
D. Miller, Thermomechanical characterization of plastic deformation and transformation fatigue in shape memory alloys, Ph.D. thesis, Texas A&M University (2000).
O. Bertacchini, D. Lagoudas, E. Patoor, Fatigue life characterization of shape memory alloys undergoing thermomechanical cyclic loading, Proceedings of SPIE, Smart Structures and Materials (2003) 612–624.
K. Gall, H. Maier, Cyclic deformation mechanisms in precipitated NiTi shape memory alloys, Acta Materialia 50 (2002) 4643–4657.
G. Eggeler, E. Hornbogen, A. Yawny, A. Heckmann, M. Wagner, Structural and functional fatigue of NiTi shape memory alloys, Materials Science and Engineering A (378) (2004) 24–33.
W. Predki, M. Klönne, A. Knopik, Cyclic torsional loading of pseudoelastic NiTi shape memory alloys: Damping and fatigue failure, Materials Science and Engineering A (417) (2006) 182–189.
K. Madangopal, The self accomodating martensitic microstructure of NiTi shape memory alloys, Acta Materialia 45 (12) (1997) 5347–5365.
W. J. Buehler, R. C. Wiley, Nickel-base alloys, U.S. Patent 3,174,851. (1965).
S. Miyazaki, K. Otsuka, Deformation and transformation behavior associated with the r-phase in Ti - Ni alloys., Metallurgical Transactions A 17A (1986) 53–63.
D. Hartl, B. Volk, D. C. Lagoudas, F. T. Calkins, J. Mabe, Thermomechanical characterization and modeling of Ni60Ti40 SMA for actuated chevrons, in: Proceedings of ASME, International Mechanical Engineering Congress and Exposition (IMECE), 5–10 November, Chicago, IL, 2006, pp. 1–10.
K. Richardson, Nitinol technologies innovator redefining the cutting edge, Outlook 22 (2) (2001) 1–8.
D. J. Clingman, F. T. Calkins, J. P. Smith, Thermomechanical properties of 60-Nitinol, in: Proceedings of the SPIE, Smart Structures and Materials: Active Materials: Behavior and Mechanics, Vol. 5053, 2003, pp. 219–229.
J. Mabe, R. Ruggeri, F. T. Calkins, Characterization of nickel-rich nitinol alloys for actuator development, in: Proceedings of the International Conference on Shape Memory and Superelasticity Technology, 2006.
T. H. Nam, T. Saburi, K. Shimizu, Copper-content dependence of shape memory characteristics in Ti - Ni - Cu alloys, Materials Transactions, JIM 31 (11) (1990) 959–967.
T. Saburi, T. Takagi, S. Nenno, K. Koshino, in: M. Doyama, S. Somlya, R. P. H. Chang (Eds.), Shape Memory Materials, MRS International Meeting on Advanced Materials, Vol. 9, 1989, pp. 147–152.
N. M. Matveeva, V. N. Khachin, V. P. Shivokha, Stable and metastable phase equilibrium in metallic systems, Nauka, Moscow, 1985.
Y. Liu, Mechanical and thermomechanical properties of a Ti0.50Ni0.25Cu0.25 melt spun ribbon, Materials Science and Engineering A 354 (2003) 286–291.
Z. L. Xie, J. Van Humbeeck, Y. Liu, L. Delaey, TEM study of Ti50Ni25Cu25 melt spun ribbons, Scripta Materialia 37 (3) (1997)363–371.
K. N. Melton, J. Simpson, T. W. Duerig, A new wide hysteresis NiTi based shape memory alloy and its applications, in: Proceedings of The International Conference on Martensitic Transformations, The Japan Institute of Metals, 1986, pp. 1053–1058.
K. N. Melton, J. L. Proft, T. W. Duerig, Wide hysteresis shape memory alloys based on the Ni - Ti - Nb system, MRS 9 (1989) 165–170.
L. C. Zhao, T. W. Duerig, S. Justi, K. N. Melton, J. L. Proft, W. Yu, C. M. Wayman, The study of niobium-rich precipitates in a Ni-Ti-Nb shape memory alloy, Scripta Metallurgica and Materialia 24 (1990)221–226.
C. S. Zhang, L. C. Zhao, T. W. Duerig, C. M. Wayman, Effects of deformation on the transformation hysteresis and shape memory effect in a Ni47Ti44Nb9 alloy, Scripta Metallurgica and Materialia 2 (1990) 1807–1812.
M. Piao, K. Otsuka, S. Miyazaki, H. Horikawa, Mechanism of the as temperature increase by pre-deformation in thermoelastic alloys, Materials Transactions, JIM 34 (10) (1993) 919–929.
X. M. He, L. J. Rong, D. S. Yan, Y. Y. Li, TiNiNb wide hysteresis shape memory alloy with low niobium content,Materials Science and Engineering A 371 (2004) 193–197.
P. G. Lidquist, C. M. Wayman, Shape memory and transformation behavior of martensitic Ti- P d-Ni and Ti- P t-Ni alloys, in: T. W. Duerig, K. N. Melton, D. Stöckel, C. M. Wayman (Eds.), Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann, London, 1990, pp. 58–68.
P. E. Thoma, J. J. Boehm, Effect of composition on the amount of second phase and transformation temperatures of NixTi90-x H f10 shape memory alloys, Materials Science and Engineering A 273-275 (1999) 385–389.
V. N. Khachin, N. A. Matveeva, V. P. Sivokha, D. V. Chernov, High-temperature shape memory effects in TiNi-Ti P d system alloys, Doklady Akademii Nauk SSSR ( USSR ) 257 (1) (1981) 167–169.
S. Wu, C. Wayman, Martensitic transformations and the shape-memory effect in Ti50Ni10Au40 and Ti50Au50 alloys, Metallography (1987) 359.
P. K. Kumar, D. C. Lagoudas, K. J. Zanca, M. Z. Lagoudas, Thermomechanical characterization of high temperature SMA actuators, in: Proceedings of SPIE, Vol. 6170, 2006, pp. 306–312.
S. Padula II, G. Bigelow, R. Noebe, D. Gaydosh, A. Garg, Challenges and progress in the development of high-temperature shape memory alloys based on NiTiX compositions for high-force actuator applications, in: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, ASM International, Metals Park, OH, 2006.
Z. Pu, H. Tseng, K. Wu, Martensite transformation and shape-memory effect of NiTi-Zr high- temperature shape-memory alloys, in: SPIE proceedings, Vol. 2441, 1995, p. 171.
B. Strnadel, S. Ohashi, H. Ohtsuka, T. Ishihara, S. Miyazaki, Cyclic stress-strain characteristics of Ti-Ni and Ti-Ni-Cu shape memory alloys, Material Science & Engineering A 202 (1995) 148–156.
P. Potapov, A. Shelyakov, A. Gulyaev, E. Svistunova, N. Matveeva, D. Hodgson, Effect of hf on the structure of Ni-Ti martensitic alloys, Materials Letters 32 (4) (1997) 247–250.
S. Hsieh, S. Wu, Room-temperature phases observed in Ti53-x Ni47 Zr_x high-temperature shape memory alloys, Journal of Alloys and Compounds 226 (1998) 276–282.
K. Enami, S. Menno, Metal transformation 2 (1971).
R. Kainuma, M. Ise, C. Jia, H. Ohtani, K. Ishida, Phase equilibria and microstructural control in the Ni- C o- A l system, Intermetallics 4 (1996) 151.
D. Schryvers, P. Boullay, P. Potapov, R. Kohn, J. Ball, Microstructures and interfaces in Ni- A l martensite: comparing HRTEM observations with continuum theories, International Journal of Solids Structures 39 (3543).
H. E. Karaca, I. Karaman, D. C. Lagoudas, H. J. Maier, Y. I. Chumlyakov, Recoverable stress-induced martensitic transformation in a ferromagnetic CoNiAl alloy, Scripta Materialia 49 (2003) 831–836.
H. Morito, A. Fujita, R. Kainuma, K. Ishida, K. Oikawa, Magnetocrystalline anisotropy in single-crystal Co - Ni - Al ferromagnetic shape-memory alloy, Applied Physics Letters 81 (9) (2002) 1657–1659.
P. J. Webster, K. R. A. Ziebeck, S. L. Town, M. S. Peak, Magnetic order and phase transformation in Ni_2MnGa , Philosophical Magazine B 49 (3) (1984) 295–310.
S. J. Murray, M. Marioni, S. M. Allen, R. C. O’Handley, 6 magnetic-field-induced strain by twin-boundary motion in ferromagnetic Ni - Mn - Ga , Applied Physics Letters 77 (6) (2000) 886–888.
R. C. O’Handley, S. M. Allen, D. I. Paul, C. P. Henry, M. Marioni, D. Bono, C. Jenkins, A. Banful, R. Wager, Keynote address: Magnetic field-induced strain in single crystal Ni - Mn - Ga , Proceedings of SPIE, Symposium on Smart Structures and Materials 5053 (2003) 200–206.
A. Sozinov, A. A. Likhachev, N. Lanska, O. Söderberg, K. Ullakko, V. K. Lindroos, Effect of crystal structure on magnetic-field-induced strain in Ni - Mn - Ga , Proceedings of SPIE, Symposium on Smart Structures and Materials 5053 (2003) 586–594.
H. Karaca, I. Karaman, B. Basaran, D. Lagoudas, Y. Chumlyakov, H. Maier, On the stress-assisted magnetic-field-induced phase transformation in ni2mnga ferromagnetic shape memory alloys, Acta Materialia 55 (2007) 4253–4269.
J. Cui, T. W. Shield, R. D. James, Phase transformation and magnetic anisotropy of an iron-palladium ferromagnetic shape-memory alloy, Acta Materialia 52 (2004) 35–47.
R. D. James, M. Wuttig, Magnetostriction of martensite, Philosophical Magazine A 77 (5) (1998) 1273–1299.
T. W. Shield, Magnetomechanical testing machine for ferromagnetic shape-memory alloys, Review of Scientific Instruments 74 (9) (2003) 4077–4088.
T. Yamamoto, M. Taya, Y. Sutou, Y. Liang, T. Wada, L. Sorensen, Magnetic field-induced reversible variant rearrangement in Fe - Pd single crystals, Acta Materialia 52 (17) (2004) 5083–5091.
S. J. Murray, R. Hayashi, M. Marioni, S. M. Allen, R. C. O’Handley, Magnetic and mechanical properties of FeNiCoTi and NiMnGa magnetic shape memory alloys, Proceedings of SPIE 3675 (1999) 204–211.
A. Fujita, K. Fukamichi, F. Gejima, R. Kainuma, K. Ishida, Magnetic properties and large magnetic-field-induced strains in off-stoichiometric Ni - Mn - Al heusler alloys, Applied Physics Letters 77 (19) (2000) 3054–3056.
M. Wuttig, J. Li, C. Craciunescu, A new ferromagnetic shape memory alloy system, Scripta Materialia 44 (2001) 2393–2397.
T. Sakamoto, T. Fukuda, T. Kakeshita, T. Takeuchi, K. Kishio, Magnetic field-induced strain in iron-based ferromagnetic shape memory alloys, Journal of Applied Physics 93 (10) (2003) 8647–8649.
K. R. Melton, General applications of shape memory alloys and smart materials, in: K. Otsuka, C. M. Wayman (Eds.), Shape Memory Materials, Cambridge University Press, Cambridge, 1999, Ch. 10, pp. 220–239.
C. Liang, F. Davidson, L. M. Schetky, F. K. Straub, Applications of torsional shape memory alloys actuators for active rotor blade control — opportunities and limitations, in: Proceedings of SPIE, Smart Structures and Materials: Smart Structures and Integrated Systems, Vol. 2717, 1996, pp. 91–100.
L. J. Garner, L. N. Wilson, D. C. Lagoudas, O. K. Rediniotis, Development of a shape memory alloy actuated biomimetic vehicle, Smart Materials and Structures 9 (2000) 673–683.
A. A. Ilyin, P. G. Sysolyatin, V. E. Gunter, A. P. Dergilev, M. A. Didin, S. P. Sysolyatin, I. A. Makarova, The use of superelastic shape memory implants in temporo-mandibular joint surgery, Proceedings of the First International Symposium on Advanced Biomaterials (ISAB), Montreal, Canada (1997) 177.
V. Brailovski, F. Trochu, Review of shape memory alloys medical applications in R ussia, Bio-Medical Materials & Engineering 6 (4) (1996) 291–298.
B. Sanders, R. Crowe, E. Garcia, Defense advanced research projects agency – S mart materials and structures demonstration program overview, Journal of Intelligent Material Systems and Structures 15 (2004) 227–233.
J. Kudva, Overview of the DARPA smart wing project, Journal of Intelligent Material Systems and Structures 15 (2004) 261–267.
J. K. Strelec, D. C. Lagoudas, M. A. Khan, J. Yen, Design and implementation of a shape memory alloy actuated reconfigurable wing, Journal of Intelligent Material Systems and Structures 14 (2003) 257–273.
R. Mani, D. Lagoudas, O. Rediniotis, MEMS based active skin for turbulent drag reduction, in: Proceedings of SPIE, Smart Structures and Materials, Vol. 5056, San Diego, CA, 2003, pp. 9–20.
M. Tawfik, J. Ro, C. Mei, Thermal post-buckling and aeroelastic behaviour of shape memory alloy reinforced plates, Smart Materials and Structures 11 (2002) 297–307.
C. Nam, A. Chattopadhyay, Y. Kim, Application of shape memory alloy ( SMA ) spars for aircraft maneuver enhancement, in: Proceedings of SPIE, Smart Structures and Materials, Vol. 4701, San Diego, CA, 2002, pp. 226–236.
D. Pitt, J. Dunne, E. White, E. Garcia, SAMPSON smart inlet SMA powered adaptive lip design and static test, Proceedings of the 42nd AIAA Structures, Structrual Dynamics, and Materials Conference, Seattle, WA, 16–20 April 2001 (2001) 1–11.
S. Wax, G. Fischer, R. Sands, The past, present, and future of DARPAs investment strategy in smart materials, Journal of the Minerals, Metals, and Materials Society 55 (12) (2003) 17–23.
J. Mabe, R. Cabell, G. Butler, Design and control of a morphing chevron for takeoff and cruise noise reduction, in: Proceedings of the 26th Annual AIAA Aeroacoustics Conference, Monterey, CA, 2005, pp. 1–15.
T. Turner, R. Buehrle, R. Cano, G. Fleming, Modeling, fabrication, and testing of a SMA hybrid composite jet engine chevron concept, Journal of Intelligent Material Systems and Structures 17 (2006) 483–497.
J. H. Mabe, F. Calkins, G. Butler, Boeing’s variable geometry chevron, morphing aerostructure for jet noise reduction, in: 47th AIAA/ ASME / ASCE / AHS / ASC Structures, Structural Dynamics and Materials Conference, Newport, Rhode Island, 2006, pp. 1–19.
V. Birman, Review of mechanics of shape memory alloy structures, Applied Mechanics Reviews 50 (11) (1997) 629–645.
H. Prahlad, I. Chopra, Design of a variable twist tiltrotor blade using shape memmory alloy ( SMA ) actuators, in: Proceedings of SPIE, Smart Structures and Materials, Vol. 4327, Newport Beach, CA, 2001, pp.46–59.
A. Jacot, R. Ruggeri, D. Clingman, Shape memory alloy device and control method, U.S. Patent 7,037,076 (2 May (2006).
K. Singh, J. Sirohi, I. Chopra, An improved shape memory alloy actuator for rotor blade tracking, Journal of Intelligent Material Systems and Structures 14 (2003) 767–786.
D. Kennedy, F. Straub, L. Schetky, Z. Chaudhry, R. Roznoy, Development of an SMA actuator for in-flight rotor blade tracking, Journal of Intelligent Material Systems and Structures 15 (2004) 235–248.
R. Loewy, Recent developments in smart structures with aeronautical applications, Smart Materials and Structures 6 (1997) R11–R42.
C. Test, S. Leone, S. Ameduri, A. Concilio, Feasibility study on rotorcraft blade morphing in hovering, in: Proceedings of SPIE, Smart Structures and Materials, Vol. 5764, San Diego, CA, 2005, pp. 171–182.
A. Johnson, Non-explosive seperation device, U.S. Patent 5,119,555 (June 1992).
O. Godard, M. Lagoudas, D. Lagoudas, Design of space systems using shape memory alloys, in: Proceedings of SPIE, Smart Structures and Materials, Vol. 5056, San Diego, CA, 2003, pp. 545–558.
C. Willey, B. Huettl, S. Hill, Design and development of a miniature mechanisms tool-kit for micro spacecraft, in: Proceedings of the 35 th Aerospace Mechanisms Symposium, Ames Research Center, 9–11 May, 2001, pp. 1–14.
A. Peffer, K. Denoyer, E. Fossness, D. Sciulli, Development and transition of low-shock spacecraft release devices, in: Proceedings of IEEE Aerospace Conference, Vol. 4, 2000, pp. 277–284.
B. Carpenter, J. Lyons, EO-1 technology validation report: L ightweight flexible solar array experiment, Tech. rep., NASA Godard Space Flight Center, Greenbelt, MD (8 August 2001).
S. Shabalovskaya, Biological aspects of TiNi alloys surfaces, Journal de Physique IV 5 (1995) 1199–1204.
J. Ryhänen, Biocompatibility evolution of nickel-titanium shape memory alloy, Ph.D. thesis, Univeristy of Oulu, Oulu, Finland (1999).
L. Machado, M. Savi, Medical applications of shape memory alloys, Brazilian Journal of Medical and Biological Research 36 (2003) 683–691.
D. Mantovani, Shape memory alloys: P roperties and biomedical applications, Journal of the Minerals, Metals and Materials Society 52 (2000) 36–44.
K. Speck, A. Fraker, Anodic polarization behavior of Ti-Ni and Ti-6 A l-4 V in simulated physiological solutions, J Dent Res 59 (100) (1980) 1590–1595.
G. Andreasen, T. Hilleman, An evaluation of 55 cobalt subsituted nitinol wire for use in orthodontics, Journal of the American Dental Association 82 (1971) 1373–1375.
S. Thompson, An overview of nickel-titanium alloys used in dentistry, International Endodontic Journal 33 (2000) 297–310.
T. Duerig, A. Pelton, D. Stöckel, Superelastic nitinol for medical devices, Medical Plastics and Biomaterials (1997) 31–42.
D. Lagoudas, E. Vandygriff, Processing and characterization of niti porous sma by elevated pressure sintering, Journal of intelligent material system and structures 13 (2002) 837–850.
J. Paine, C. Rogers, High velocity impact response of composites with surface bonded nitinol- SMA hybrid layers, Journal of Intelligent Material Systems and Structures 5 (4) (1994) 530–535.
B. Barnes, D. B. J. Luntz, A. Browne, K. Strom, Panel deployment using ultrafast SMA latches, in: ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, USA, 2006.
K. Otsuka, T. Kakeshita, Science and technology of shape-memory alloys: New developments, bulletin (February (2002).
P. Anderson, A., S. Sangesland, Detailed study of shape memory alloys in oil well applications., Sintef petroleum research, Trondheim, Norway (1999).
I. Ohkata, Y. Suzuki, The design of shape memory alloy actuators and their applications, in: K. Otsuka, C. M. Wayman (Eds.), Shape Memory Materials, Cambridge University Press, Cambridge, 1999, Ch. 11, pp. 240–266.
S. Saadat, J. Salichs, M. Noori, Z. Hou, H. Davoodi, I. Bar-on, An overview of vibration and seismic applications of NiTi shape memory alloy, Smart Materials and Structures 11 (2002) 218–229.
J. Evans, D. Brei, J. Luntz, Preliminary experimental study of SMA knitted actuation architectures, in: ASME International Mechanical Engineering Congress and Exposition, 2006.
V. Brailovski, S. Prokoshkin, P. Terriault, F. Trochu (Eds.), Shape Memory Alloys: Fundamentals, Modeling and Applications, University of Quebec, 2003.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer-Verlag US
About this chapter
Cite this chapter
Kumar, P., Lagoudas, D. (2008). Introduction to Shape Memory Alloys. In: Shape Memory Alloys., vol 1. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-47685-8_1
Download citation
DOI: https://doi.org/10.1007/978-0-387-47685-8_1
Published:
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-47684-1
Online ISBN: 978-0-387-47685-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)