Abstract
Companies have to shorten the innovation cycle for products to obtain a competitive advantage. Thus not only time to market but also time for developing new products has to be reduced. Due to that several software tools are used to facilitate a computer based product synthesis. One of them is a Product Data Management System (PDMS) for the integration and administra-tion of all kind of CAx-data. With dedicated data transfer, information processing methods and self-generating assembly sequences it is possible to shorten the time between the arrangement drawing, part production and final assembly to a few moments. Because of a continuous data model it is even possible to transmit data backward in the product creation process. The information can be used as rules for an engineering workbench or for the visualization of the progress. Consequently a PDMS as an information feed-back control system can realize a more robust and sustainable product synthesis.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Eigner, M., Stelzer, R.: Produktdatenmanagement-Systeme: Ein Leitfaden zum Product Development und Life Cycle Management. Springer, Berlin (2001)
Koch, A., Rueckel, V., Hauck, C., Ernst, R.: Verkuerzung der Prozesskette Konstruktion – Qualitaetsmanagement – Montage durch Rueckkopplung von Prozesswissen. In: Geiger, M., Ehrenstein, G.W. (eds.) DFG Sonderforschungsbereich, Beitraege zum Berichts- und Industriekolloquium. Meisenbach, Bamberg, vol. 396, pp. 105–129 (2003)
Koch, A., Rueckel, V.: Potential von Prozessinformationen fuer fruehe Phasen im Produktentstehungsprozess. In: Meerkamm, H. (ed.) Design for X – Beitraege zum, Symposium, Erlangen, vol. 14 (2003)
Licha, A.: Flexible Montageautomatisierung zur Komplettmontage flaechenhafter Produktstrukturen durch kooperierende Industrieroboter. University Erlangen-Nuremberg, PhD. Feldmann, K., Geiger, M. (eds.): Reihe Fertigungstechnik, Band 138, Meisenbach, Bamberg (2003)
Mesihovic, S., Malmqvist, J., Pikosz, P.: Product data management system-based support for engineering project management. Journal of Engineering Design 15(4), 389–403 (2004)
Saaksvuori, A., Immonen, A.: Product Lifecycle Management. Springer, Berlin (2004)
Schoettner, J.: Produktdatenmanagement in der Fertigungsindustrie – Prinzip – Konzepte – Strategien, Carl Hanser Verlag, Munich Wien (1999)
Stark, J.: Product Lifecycle Management – 21st Century Paradigm for Product Realisation. Springer, London (2005)
Wartzack, S.: Predictive Engineering – Assistenzsystem zur multikriteriellen Analyse alternativer Produktkonzepte. University Erlangen-Nuremberg, PhD, Reihe 1, Nr. 336, VDI-Verlag, Duesseldorf (2001)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Rueckel, V., Koch, A., Feldmann, K., Meerkamm, H. (2006). Process Data Management for the Shortening of the Whole Product Creation Process. In: Shen, Wm., Chao, KM., Lin, Z., Barthès, JP.A., James, A. (eds) Computer Supported Cooperative Work in Design II. CSCWD 2005. Lecture Notes in Computer Science, vol 3865. Springer, Berlin, Heidelberg. https://doi.org/10.1007/11686699_62
Download citation
DOI: https://doi.org/10.1007/11686699_62
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-32969-5
Online ISBN: 978-3-540-32970-1
eBook Packages: Computer ScienceComputer Science (R0)