Abstract
The successful replacement of metal alloys by ceramic matrix composites (CMC) in high-temperature engine components will require the development of constituent materials and processes that can provide CMC systems with enhanced thermal capability along with the key thermostructural properties required for long-term component service. This chapter presents information concerning processes and properties for five silicon carbide (SiC) fiber-reinforced SiC matrix composite systems recently developed by NASA that can operate under mechanical loading and oxidizing conditions for hundreds of hours at 1204, 1315, and 1427°C, temperatures well above current metal capability. This advanced capability stems in large part from specific NASA-developed processes that significantly improve the creeprupture and environmental resistance of the SiC fiber as well as the thermal conductivity, creep resistance, and intrinsic thermal stability of the SiC matrices.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
7. References
D. Brewer, HSR/EPM Combustor Materials Development Program, Materials Science and Engineering, A261, 284–291 (1999).
NASA Ultra Efficient Engine Technology (UEET) Program, http://www.grc.nasa.gov/WWW/RT2000/2000/2100shaw.html
NASA Next Generation Launch Technology (NGLT) Program, http://www1.msfc.nasa.gov/NEWSROOM/background/facts/ngltfacts.pdf
K.N. Lee, D.S. Fox, R.C. Robinson, and N.P. Bansal, Environmental Barrier Coatings for Silicon-Based Ceramics, in High Temperature Ceramic Matrix Composites, W. Krenkel, R. Naslain, and H. Schneider, Eds, Wiley-VCH, Weinheim, Germany, (2001), pp. 224–229.
J.L. Smialek, R.C. Robinson, E.J. Opila, D.S. Fox, and N.S. Jacobson, SiC and Si3N4 Recession Due to SiO2 Scale Volatility under Combustor Conditions, Adv. Composite Mater, 8[1], 33–45 (1999).
J.A. DiCarlo and H-M. Yun, Non-Oxide (Silicon Carbide) Ceramic Fibers, in Handbook of Ceramic Composites, N.P. Bansal, Ed., Kluwer Academic Publishers, Boston, MA, 2004, pp. 33–52.
L. Thomas-Ogbuji, A Pervasive Mode of Oxidation Degradation in a SiC/SiC Composite, J. Am. Ceram. Soc., 81[11], 2777–2784 (1998).
H-M. Yun, and J.A. DiCarlo, Comparison of the Tensile, Creep, and Rupture Strength Properties of Stoichiometric SiC Fibers, Cer. Eng. Sci. Proc., 20[3], 259–272 (1999).
G.N. Morscher, H-M. Yun, J.A. DiCarlo, and L. Thomas-Ogbuji, Effect of a BN Interphase that Debonds Between the Interphase and the Matrix in SiC/SiC Composites, J. Am. Ceram. Soc., 87, 104–112 (2004).
R.T. Bhatt, NASA Glenn Research and Technology 2003, NASA/TM-2004-212729, 20–21 (2004).
R.T. Bhatt, T.R. McCue, and J.A. DiCarlo, Thermal Stability of Melt Infiltrated SiC/SiC Composites, Cer. Eng. Sci. Proc., 24[4B], (2003), 295–300.
J.A. DiCarlo, R.T. Bhatt, and T.R. McCue, Modeling the Thermostructural Stability of Melt Infiltrated SiC/SiC Composites, Cer. Eng. Sci. Proc., 24[4B], (2003), 465–470.
Starfire Systems, http://www.starfiresystems.com/
G.S. Corman and K.L. Luthra, Silicon Melt Infiltrated Ceramic Composites (HiPerComp™), in Handbook of Ceramic Composites, N.P. Bansal, Ed., Kluwer Academic Publishers, Boston, MA, 2004, pp. 99–115.
S.K. Mital, P.L.N. Murthy, and J.A. DiCarlo, Characterizing the Properties of a Woven SiC/SiC Composite, Journal of Advanced Materials, 35[1], 52–60 (2003).
Z. Li and R.C. Bradt, Thermal Expansion of the Cubic (3C) Polytype of SiC, J. Mater. Sci. 21 (1986), 4366–68.
J.A. DiCarlo, Creep of Chemically Vapour Deposited SiC Fibers, J. Mater. Sci. 21 (1986), 217–224.
Thermophysical Properties of Matter, Thermal Conductivity, Nonmetallic Solids, Vol. 2, Y.S. Touloukia el al., Eds., Plenum, New York, (1970), p. 6a.
G.N. Morscher, Stress-Dependent Matrix Cracking in 2D Woven SiC-fiber Reinforced Melt-Infiltrated SiC Matrix Composites, Comp. Sci. Tech., in print.
G.N. Morscher and J.D. Cawley, Intermediate Temperature Strength Degradation in SiC/SiC Composites, J. European Ceram. Soc., 22, 2777–2787 (2002).
J.A. DiCarlo, H.M. Yun, and J.B. Hurst, Fracture Mechanisms for SiC Fibers and SiC/SiC Composites Under Stress-Rupture Conditions at High Temperatures, Applied Mathematics and Computation, 152, 473–481(2004).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Kluwer Academic Publishers
About this chapter
Cite this chapter
DiCarlo, J.A., Yun, H.M., Morscher, G.N., Bhatt, R.T. (2005). SiC/SiC Composites for 1200°C and Above. In: Bansal, N.P. (eds) Handbook of Ceramic Composites. Springer, Boston, MA . https://doi.org/10.1007/0-387-23986-3_4
Download citation
DOI: https://doi.org/10.1007/0-387-23986-3_4
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-8133-0
Online ISBN: 978-0-387-23986-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)