Special Issue: Recent Advances in Modeling and Numerical Simulation of Thermal Spray Processes

Special Issue published in Mid-December 2009, Vol. 18, No. 5-6 of Journal of Thermal Spray Technology

Journal

Journal of Thermal Spray Technology

"Manufacturing and Icephobic Performance Evaluation of Cold-Sprayed Adhesive Perfluoroalkoxy Alkane Coatings” has been chosen as the Journal of Thermal Spray Technology's 2023 Best...

Joachim Heberlein

University of Minnesota, USA
Armelle Vardelle

University of Limoges, France

Showing 1-27 of 27 articles

JTST Special "Recent Advances in Modeling and Simulation of Thermal Spray Processes" Issue
Joachim Heberlein
Armelle Vardelle
Editorial 30 October 2009 Pages: 727 - 727
Erratum to: From Particle Acceleration to Impact and Bonding in Cold Spraying
Tobias Schmidt
Hamid Assadi
Thomas Klassen
Erratum 02 October 2009 Pages: 1038 - 1038
Modeling the Build-Up of Internal Stresses in Multilayer Thick Thermal Barrier Coatings
H. Samadi
T. W. Coyle
Peer Reviewed 24 September 2009 Pages: 996 - 1003
Numerical Study of the Plasma Flow Field and Particle In-flight Behavior with the Obstruction of a Curved Substrate
Te Ba
Chang Wei Kang
Heong Wah Ng
Peer Reviewed 24 September 2009 Pages: 858 - 874
Numerical Investigation of a Hybrid HVOF-Plasma Spraying Process
B. Martinez
G. Mariaux
M. Parco
Peer Reviewed 24 September 2009 Pages: 909 - 920
Lifetime of Plasma-Sprayed Thermal Barrier Coatings: Comparison of Numerical and Experimental Results
Robert Vaßen
Stephan Giesen
Detlev Stöver
Peer Reviewed 24 September 2009 Pages: 835 - 845
The Impact of a Partially Molten YSZ Particle
Tommy Che-Ming Wu
Markus Bussmann
Javad Mostaghimi
Peer Reviewed 11 September 2009 Pages: 957 - 964
Review of Modeling of Liquid Precursor Droplets and Particles Injected into Plasmas and High-Velocity Oxy-Fuel (HVOF) Flame Jets for Thermal Spray Deposition Applications
Baki M. Cetegen
Saptarshi Basu
Peer Reviewed 03 September 2009 Pages: 769 - 793
The Sensitivity of Abradable Coating Residual Stresses to Varying Material Properties
R. E. Johnston
Peer Reviewed 02 September 2009 Pages: 1004 - 1013
Mathematical Modeling and Numerical Simulation of Splat Cooling in Plasma Spray Coatings
H. Fukanuma
R. Huang
Y. Uesugi
Peer Reviewed Open access 13 August 2009 Pages: 965 - 974
Modeling of Thermal Spraying Heat Transfer Processes by Exodus Stochastic Method
Milan Honner
Jan Sroub
Peer Reviewed 12 August 2009 Pages: 1014 - 1021
Assessment of CFD Modeling via Flow Visualization in Cold Spray Process
B. Samareh
O. Stier
A. Dolatabadi
Peer Reviewed 11 August 2009 Pages: 934 - 943
From Particle Acceleration to Impact and Bonding in Cold Spraying
Tobias Schmidt
Hamid Assadi
Thomas Klassen
Peer Reviewed Open access 06 August 2009 Pages: 794 - 808
Influence of the Definition of the Representative Volume Element on Effective Thermoelastic Properties of Thermal Barrier Coatings with Random Microstructure
K. Bobzin
N. Bagcivan
J. Scheele
Peer Reviewed 25 July 2009 Pages: 988 - 995
Trajectory Generation and Coupled Numerical Simulation for Thermal Spraying Applications on Complex Geometries
A. Candel
R. Gadow
Peer Reviewed 21 July 2009 Pages: 981 - 987
Comparisons Between Two Different Three-Dimensional Arc Plasma Torch Simulations
B. Selvan
K. Ramachandran
Peer Reviewed 21 July 2009 Pages: 846 - 857
From DC Time-Dependent Thermal Plasma Generation to Suspension Plasma-Spraying Interactions
Erick Meillot
S. Vincent
D. Damiani
Peer Reviewed 16 July 2009 Pages: 875 - 886
Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics
Hong-Bing Xiong
Jian-Zhong Lin
Peer Reviewed 08 July 2009 Pages: 887 - 895
Elastic and Conductive Properties of Plasma-Sprayed Ceramic Coatings in Relation to Their Microstructure: An Overview
Igor Sevostianov
Mark Kachanov
Peer Reviewed Open access 27 June 2009 Pages: 822 - 834
Calculation of Particle Parameters for Cold Spraying of Metal-Ceramic Mixtures
S. V. Klinkov
V. F. Kosarev
I. Smurov
Peer Reviewed 17 June 2009 Pages: 944 - 956
Arc Plasma Torch Modeling
J. P. Trelles
C. Chazelas
J. V. R. Heberlein
Peer Reviewed 16 June 2009 Pages: 728 - 752
Modeling and Simulation of Microstructure Formation for Porosity Prediction in Thermal Barrier Coatings Under Air Plasma Spraying Condition
K. Bobzin
N. Bagcivan
I. Petković
Peer Reviewed 03 June 2009 Pages: 975 - 980
Modeling of Combustion as well as Heat, Mass, and Momentum Transfer During Thermal Spraying by HVOF and HVSFS
Esther Dongmo
Rainer Gadow
Martin Wenzelburger
Peer Reviewed 03 June 2009 Pages: 896 - 908
Heat Transfer Through Plasma-Sprayed Thermal Barrier Coatings in Gas Turbines: A Review of Recent Work
I. O. Golosnoy
A. Cipitria
T. W. Clyne
Peer Reviewed 03 June 2009 Pages: 809 - 821
Modeling Aspects of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Element Analysis
Wen-Ya Li
Chao Zhang
Hanlin Liao
Peer Reviewed 07 May 2009 Pages: 921 - 933
Two-Directional Nodal Model for Co-Condensation Growth of Multicomponent Nanoparticles in Thermal Plasma Processing
Masaya Shigeta
Takayuki Watanabe
Peer Reviewed 24 April 2009 Pages: 1022 - 1037
Modeling and Control of High-Velocity Oxygen-Fuel (HVOF) Thermal Spray: A Tutorial Review
Mingheng Li
Panagiotis D. Christofides
Peer Reviewed Open access 27 March 2009 Pages: 753 - 768

Special Issue: Recent Advances in Modeling and Numerical Simulation of Thermal Spray Processes

Participating journal

Journal of Thermal Spray Technology

Editors

Joachim Heberlein

Armelle Vardelle

Articles

JTST Special "Recent Advances in Modeling and Simulation of Thermal Spray Processes" Issue

Erratum to: From Particle Acceleration to Impact and Bonding in Cold Spraying

Modeling the Build-Up of Internal Stresses in Multilayer Thick Thermal Barrier Coatings

Numerical Study of the Plasma Flow Field and Particle In-flight Behavior with the Obstruction of a Curved Substrate

Numerical Investigation of a Hybrid HVOF-Plasma Spraying Process

Lifetime of Plasma-Sprayed Thermal Barrier Coatings: Comparison of Numerical and Experimental Results

The Impact of a Partially Molten YSZ Particle

Review of Modeling of Liquid Precursor Droplets and Particles Injected into Plasmas and High-Velocity Oxy-Fuel (HVOF) Flame Jets for Thermal Spray Deposition Applications

The Sensitivity of Abradable Coating Residual Stresses to Varying Material Properties

Mathematical Modeling and Numerical Simulation of Splat Cooling in Plasma Spray Coatings

Modeling of Thermal Spraying Heat Transfer Processes by Exodus Stochastic Method

Assessment of CFD Modeling via Flow Visualization in Cold Spray Process

From Particle Acceleration to Impact and Bonding in Cold Spraying

Influence of the Definition of the Representative Volume Element on Effective Thermoelastic Properties of Thermal Barrier Coatings with Random Microstructure

Trajectory Generation and Coupled Numerical Simulation for Thermal Spraying Applications on Complex Geometries

Comparisons Between Two Different Three-Dimensional Arc Plasma Torch Simulations

From DC Time-Dependent Thermal Plasma Generation to Suspension Plasma-Spraying Interactions

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

Elastic and Conductive Properties of Plasma-Sprayed Ceramic Coatings in Relation to Their Microstructure: An Overview

Calculation of Particle Parameters for Cold Spraying of Metal-Ceramic Mixtures

Arc Plasma Torch Modeling

Modeling and Simulation of Microstructure Formation for Porosity Prediction in Thermal Barrier Coatings Under Air Plasma Spraying Condition

Modeling of Combustion as well as Heat, Mass, and Momentum Transfer During Thermal Spraying by HVOF and HVSFS

Heat Transfer Through Plasma-Sprayed Thermal Barrier Coatings in Gas Turbines: A Review of Recent Work

Modeling Aspects of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Element Analysis

Two-Directional Nodal Model for Co-Condensation Growth of Multicomponent Nanoparticles in Thermal Plasma Processing

Modeling and Control of High-Velocity Oxygen-Fuel (HVOF) Thermal Spray: A Tutorial Review

Navigation

Special Issue: Recent Advances in Modeling and Numerical Simulation of Thermal Spray Processes

Participating journal

Editors

Joachim Heberlein

Armelle Vardelle

Articles

Search

Navigation