Collection
Special Issue: Reliability and Consistency in Thermal Spray
- Submission status
- Closed
Special Issue published in June 2010, Vol. 19, No. 4 of Journal of Thermal Spray Technology
Editors
-
Klaus Landes
University of German Armed Forces Munich (Ret.), Germany
-
Basil R. Marple
National Research Council of Canada, Canada
Articles (17 in this collection)
-
-
JTST Special Issue on “Reliability and Consistency in Thermal Spray”
Authors
- Klaus Landes
- Basil Marple
- Content type: Editorial
- Published: 13 April 2010
- Pages: 665 - 665
-
-
The Effect of Torch Hardware on Particle Temperature and Particle Velocity Distributions in the Powder Flame Spray Process
Authors (first, second and last of 6)
- A. Hall
- D. Urrea
- D. Hirschfeld
- Content type: Technical Note
- Published: 16 March 2010
- Pages: 824 - 827
-
Sensors in Spray Processes
Authors
- P. Fauchais
- M. Vardelle
- Content type: Peer Reviewed
- Open Access
- Published: 11 March 2010
- Pages: 668 - 694
-
Sensor Issues and Requirements for Developing Real-Time Control for Plasma Spray Deposition
Authors (first, second and last of 7)
- D. Wroblewski
- G. Reimann
- M. Gevelber
- Content type: Peer Reviewed
- Published: 11 March 2010
- Pages: 723 - 735
-
Microstructure and Phase Composition of Composite Coatings Formed by Plasma Spraying of ZrO2 and B4C Powders
Authors (first, second and last of 4)
- P. Karuna Purnapu Rupa
- Prashant Sharma
- K. Balasubramanian
- Content type: Peer Reviewed
- Published: 12 February 2010
- Pages: 816 - 823
-
Controlling Spray Torch Fluid Dynamics—Effect on Spray Particle and Coating Characteristics
Authors (first, second and last of 4)
- Lorenzo Vincenzi
- Sho Suzuki
- Joachim Heberlein
- Content type: Peer Reviewed
- Published: 04 February 2010
- Pages: 713 - 722
-
Influence of Grit Blasting on the Roughness and the Bond Strength of Detonation Sprayed Coating
Authors (first, second and last of 4)
- D. Sen
- Naveen M. Chavan
- G. Sundararajan
- Content type: Peer Reviewed
- Published: 03 February 2010
- Pages: 805 - 815
-
Assessing Coating Reliability Through Pore Architecture Evaluation
Authors
- S. Paul
- Content type: Peer Reviewed
- Published: 02 February 2010
- Pages: 779 - 786
-
The Effect of Robot Kinematics on the Coating Thickness Uniformity
Authors (first, second and last of 4)
- D. Fang
- S. Deng
- C. Coddet
- Content type: Peer Reviewed
- Published: 30 January 2010
- Pages: 796 - 804
-
Supervision and Measuring of Particle Parameters During the Wire-Arc Spraying Process with the Diagnostic Systems Accuraspray-g3 and LDA (Laser-Doppler-Anemometry)
Authors (first, second and last of 9)
- S. Zimmermann
- E. Vogli
- W. Tillmann
- Content type: Peer Reviewed
- Published: 29 January 2010
- Pages: 745 - 755
-
Process Design and Monitoring for Plasma Sprayed Abradable Coatings
Authors (first, second and last of 6)
- Tanja Steinke
- Georg Mauer
- Matthew Hancock
- Content type: Peer Reviewed
- Published: 22 January 2010
- Pages: 756 - 764
-
Modern Industrial Approach to Qualification of Spray Booths and Laboratory Personnel
Authors
- J. Wigren
- J. Johansson
- Content type: Peer Reviewed
- Published: 14 January 2010
- Pages: 828 - 834
-
Assessing Process and Coating Reliability Through Monitoring of Process and Design Relevant Coating Properties
Authors (first, second and last of 4)
- Gopal Dwivedi
- Travis Wentz
- Toshio Nakamura
- Content type: Peer Reviewed
- Open Access
- Published: 14 January 2010
- Pages: 695 - 712
-
Phase Formation and Transformation in Alumina/YSZ Nanocomposite Coating Deposited by Suspension Plasma Spray Process
Authors (first, second and last of 5)
- F. Tarasi
- M. Medraj
- C. Moreau
- Content type: Peer Reviewed
- Published: 13 January 2010
- Pages: 787 - 795
-
Better Quality Control: Stochastic Approaches to Optimize Properties and Performance of Plasma-Sprayed Coatings
Authors
- Robert B. Heimann
- Content type: Peer Reviewed
- Published: 03 September 2009
- Pages: 765 - 778