Zusammenfassung
Der Werkstoff Stahl hat sich bei der Konstruktion von Automobilen insbesondere aufgrund seiner hervorragenden Kombination von Festigkeit und Duktilität in Verbindung mit einer hohen Verfügbarkeit und relativ günstigen Herstellungskosten bewährt. Jedoch sind die Anforderungen an die Auslegung von Automobilen hinsichtlich Leichtbau, Sicherheit und Umweltschutz in den letzten Jahren stetig gestiegen, wovon auch der Werkstoff Stahl betroffen ist. Impulse hierfür gaben vor allem veränderte gesetzliche Rahmenbedingungen wie die Auflagen zur Reduzierung der CO2-Emissionen, erhöhte Energiekosten und damit eine Senkung des Kraftstoffverbrauchs genauso wie die Erhöhung der Recyclingraten für einen nachhaltigen Ressourceneinsatz. Darüber hinaus stiegen die Komfortansprüche des Kunden genauso wie die Ansprüche an einen hohen Sicherheitsstandard. Diese zum Teil widersprüchlichen Anforderungen können nur über den Lösungsansatz Leichtbaukonzepte erfüllt werden. Eine zentrale Rolle für den wirtschaftlichen Automobilleichtbau spielen dabei insbesondere die höher- bis höchstfesten Stähle.
Aus diesem Grund konzentrierte sich seit Mitte der 90er die Entwicklung auf neue Stahlgüten mit gesteigerter Festigkeit und verbesserter Umformbarkeit (Bake-Hardening-Stähle, höherfeste IF-Stähle, Mehrphasenstähle), welche inzwischen im Automobilbau etabliert sind. Andere Entwicklungen wie HSD®-Stähle (siehe Abschn. 6.1.9) stehen kurz vor dem Einsatz.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Notes
- 1.
zu Fertigungsaufgabe von Kunststoffen allgemein vgl. Abschn. 7.4.
Literatur
Kerkhoff, H.J.: Keine Autos ohne Stahl, Bänder, Bleche, Rohre. S. 10–11 (2011)
LSS D7 Tool Steel Datasheet, Latrobe Special Steel Co. (2006)
Girodin, D., Manes, L., Moraux, J-Y., de Monicault, J-M.: Characterisation of the XD15 N High Nitrogen Martensitic Stainless Steel for Aerospace Bearing, 4th International Conference on Launcher Technology Space Launcher Liquid Propulsion, Liege (Belgium). 3.–6. Dec 2002
Gadadhar, S.: Corrosion behaviour and Metallurgy of novel Fe-P alloy, Applications of Fe-P alloys in 21st century, LAP LAMBERT Academic Publishing, 25. Juli 2011
Otto, M.: HSD®-Stahl, optimierter TWIPStahl im Legierungssystem Fe-Mn-Al-Si. ATZ-Fachtagung Werkstoffe im Automobilbau, Stuttgart, 18.–19. Mai 2011
Richter, F.: Physikalische Eigenschaften von Stählen und ihre Temperaturabhängigkeit, STAHLEISEN-SONDERBERICHTE Heft 10, Verlag Stahleisen m.b.h., Düsseldorf (1983)
Mukherjee, D., Muzhumathi, S., Mathiyarasu, J., Palaniswamy, N., Marikkannu, C.: Corrosion and oxidation resistance properties of titanium-containing low-alloy steel. J Solid State Electrochem 4(7), 402–407 (2000)
Hofmann, H., Mattissen, D., Schaumann, T.W.: Advanced cold rolled steels for automotive applications. Steel Res Int 80(1), 22–28 (2009)
Electrical steel sheets for high-frequency application), JFE Steel Cat.No.F1E-002-01, (2001)
Chaus, A.S., Rudnickii, F.I., Bohácik, M., Porubský, J., Úradník, P.: Cast metal-cutting tool: their production, materials and applications. Int J Adv Mach Form Oper 2(1), 35–53 (2010)
Berns, H., Theisen, W., Scheibelein, G.: Ferrous Materials: Steels and Cast Iron. Springer, Berlin Heidelberg, S. 15 (2008)
Verma, N.: Effect of Phosphorus addition as sintering, activator in Sinter-Hardened alloy steels, Tech. Rep Mme No. 499 B, Dept. of Mat. and Met. Eneg., Ind. Inst. Tech., S. 8. Kanapur (2007)
Bhatnagar, N., Srivatsan, T.S.: Processing and fabrication of advanced materials, XVII Bd. 1. I.K. International Publishing House, New Delhi, S. 68 (2009)
Pearson, W.B.: A hand book of lattice spacings and structure of metals and alloys Bd. 2. Pergamon Press, London, S. 908 (1967)
Dyson, D.J., Holmes, B.: Effect of alloying additions on lattice parameter of austenite. J Iron Steel Inst 208, 469–474 (1970)
Leslie, W.C.: The Physical Metallurgy of Steels. Mc-Graw-Hill, New York, S. 111 (1982)
Pickering, F.B., Gladman, T.: Metallurgical development in carbon steels. I.S.I. Special Report, Bd. 81., S. 10–20 (1963)
D’Ans, J., Lax, E.: Taschenbuch für Chemiker und Physiker Taschenbuch für Chemiker und Physiker. Springer, Berlin (1968)
de Albuquerque, V.H., de Macedo Silva, E., Pereira Leite, J., de Moura, E.P., de Araujo Freitas, V.L., Tavares, J.M.: Spinodal decomposition mechanism study on the duplex stainless steel UNS S31803 using ultrasonic speed measurements. Mater Des Reigate 31(4), 2147–2150 (2010)
Abbaschian, R., Abbaschian, L., Reed-Hill, R.E.: Physical Metallurgy Principles. Cengeage Learning, Stanford, S. 630 (1994)
Data sheet, Fastenal Company, Winona (2009)
Seidel, W.W.: Werkstofftechnik: Werkstoffe – Eigenschaften – Prüfung – Anwendung. Carl Hanser, München, S. 230 (2007)
Philip, T.V.: Heat treating of ultrahigh-strength steels. In: Metals Handbook, 9. Aufl. Bd. 4, S. 119. Americans Society for Metals, Ohio (1981)
Bleck, W.: Werkstoffkunde Stahl, 2. Aufl. Wissenschaftsverlag, Aachen (2004)
http://www.worldautosteel.org/Projects/ULSAB-AVC/Programme-Detail.aspx
DIN EN 10079, Begriffsbestimmungen für Stahlerzeugnisse. Beuth Verlag, Berlin (2007)
Kruska, J.U.: Tailored Blanks gehört die Zukunft im Automobilbau, STIL 02-Hausgeber Salzgitter AG (2009)
Hauger, A., Brecht, J.: Tailor Rolled Blanks, Development Strategy for Future Lightweight Design Concepts. Tagungsband zur Konferenz Strategien im Karosseriebau, Bad Nauheim (2011)
DIN EN 10027-1, Bezeichnungssystem für Stähle- Kurznamen, Beuth Verlag, Berlin (2005)
DIN EN 10130, Kaltgewalzte Flacherzeugnisse aus weichen Stählen zum Kaltumformen. Beuth Verlag, Berlin (2007)
DIN EN 10152, Elektrolytisch verzinkte kaltgewalzte Flacherzeugnisse aus Stahl zum Kaltumformen. Beuth Verlag, Berlin (2009)
DIN EN 10268, Kaltgewalzte Flacherzeugnisse aus Stahl mit hoher Streckgrenze zum Kaltumformen. Beuth Verlag, Berlin (2013)
DIN EN 10338, Warmgewalzte und kaltgewalzte Flacherzeugnisse ohne Überzug aus Mehrphasenstählen zum Kaltumformen – Technische Lieferbedingungen. Beuth Verlag, Berlin (2015)
DIN EN 10346, Kontinuierlich schmelztauchveredelte Flacherzeugnisse aus Stahl zum Kaltumformen. Beuth Verlag, Berlin (2015)
DIN EN 10083-2, Vergütungsstähle –Teil 2: unlegierte Stähle. Beuth Verlag, Berlin (2006)
DIN EN 10083-3, Vergütungsstähle –Teil 3: legierte Stähle. Beuth Verlag, Berlin (2007)
DIN EN 10088-2, Nichtrostende Stähle .Teil 2: für Blech und Band aus korrosionsbeständigen Stählen für allgemeine Verwendung. Beuth Verlag, Berlin (2005)
Merkblatt 109: Stahlsorten für oberflächenveredeltes Feinblech, Stahl-Informations-Zentrum, Düsseldorf (2011)
DIN EN 10131, Kaltgewalzte Flacherzeugnisse ohne Überzug und mit elektrolytischem Zink- oder Zink-Nickel-Überzug aus weichen Stählen sowie aus Stählen mit höherer Streckgrenze zum Kaltumformen – Grenzabmaße und Formtoleranzen. Beuth Verlag, Berlin (2006)
DIN EN 10143, Kontinuierlich schmelztauchveredeltes Blech und Band aus Stahl – Grenzabmaße und Formtoleranzen. Beuth Verlag, Berlin (2006)
VDA 239-100: Flacherzeugnisse aus Stahl zur Kaltumformung, Verband der Automobilindustrie, Berlin (2011)
SEW022: Kontinuierlich schmelztauchveredelte Flacherzeugnisse aus Stahl Zink-Magnesium-Überzüge, Verlag Stahleisen, Düsseldorf (2010)
Charakteristische Merkmal 095: Schmelztauchveredeltes Band und Blech, Stahl-Informations-Zentrum, Düsseldorf (2010)
Kurosawa, M., Sato, S., Obara, T., Tsunoyama, K.: Age-hardening behaviour and dent resistance of bake-hardenable and extra deep-drawable high strength steel. Kawasaki Steel Tech. Rep, Bd. 18. S. 61–65 (1988)
Bleck, W., Bode, R., Gielsel, D., Schlaphof, W.: Höhere Bauteilstreckgrenzen bei gut (Bake-hardening), Thyssen technische Berichte, Heft 2/89
Baker, L.J., Daniel, S.R., Parker, J.D.: Metallurgy and processing of ultralow cabon bake hardening steels. Mater Sci Tech 18, 355–368 (2002)
Gladmen, T., Mitchell, P. S.: Vanadium in Interstitial Free Steels, Vanitec.org (V0497)
Norm DIN EN 10325; Stahl – Bestimmung der Streckgrenzenerhöhung durch Wärmebehandlung (Bake-Hardening-Index); Deutsche Fassung EN 10325:2006. Beuth Verlag, Berlin (2006)
Norm DIN ISO 10275, Metallische Werkstoffe - Blech und Band - Bestimmung des Verfestigungsexponenten im Zugversuch (ISO 10275:2007); Deutsche Fassung EN ISO 10275:2014. Beuth Verlag, Berlin (2014)
Evertz, T., Liebertz, H.: E-Modul von Feinblechen nach Vorverformung sowie anschließender Wärmebehandlung für die Simulation. Tagung Werkstoffprüfung, Bad Neuenahr., S. 35–42 (2006). Tagungsband 2006 Verlag Stahleisen GmbH
Meyer, L.: Möglichkeiten zur Verbesserung der Werkstoffeigenschaften von Warmband und Kaltband aus Stahl durch Optimierung der Herstellbedingungen, genehmigte Habilitationsschrift RWTH Aachen (1987)
Evertz, T., Beusse, R.: Metallographie III: Werkstoffkundliche Fragestellungen und ihre Lösungen; Seminarreihe IfB Stahl-Zentrum: Institut für Bildung im Stahl-Zentrum, Aachen 2/4.März 2005
Mohrbacher, H., Flaxa, F., Schulz, T., Pohl, M.: Low Carbon microalloyed cold rolled, hot dip galvanized Dual Phase Steel for larger cross sectional areas with improved properties, Proceedings CD Galvatech 2011, Genova(Italy), 21.–24. June 2011, 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Session: Automotive Applications, Datei: 19.pdf
Heller, T., Evertz, T., Pichler, A.: Trends bei oberflächenveredelten Feinblechen. Stahl Eisen 126(7), 63–70 (2006)
Niemeyer, M., Schulz, T., Evertz, T., Eggers, U., Luther, F.: The new salzgitter mannesmann forschung technology center continuous R&D process chain – systematic product development. Steel Res Int 5, 396–400 (2008)
Norm DIN EN 10052:1994-01; Begriffe der Wärmebehandlung von Eisenwerkstoffen; Deutsche Fassung EN 10052:1993. Beuth Verlag, Berlin (1993)
Merkblatt 450 Wärmebehandlung von Stahl – Härten, Anlassen, Vergüten, Bainitisieren. Stahl-Informations-Zentrum im Stahl-Zentrum, www.stahl-info.de
N.N.: Internet-Publikation: http://www.worldautosteel.org/SteelBasics/Steel-Types/Post-Forming-Heat-Treatable.aspx
Kolleck, R., Veit, R.: Robert Current and Future Trends in the field of Hot Stamping of Car Body Parts, Konferenz-Einzelbericht: SCT2011 – Steel in Cars and Trucks, S. 40–47, Salzburg, 06.–08. June 2011
Charakteristische Merkmale 095 Schmelztauchveredeltes Band und Blech. Stahl-Informations-Zentrum im Stahl-Zentrum, www.stahl-info.de
Erdmann, C.M., Flaxa, V., Guettler, J., Rieth, M., Schöttler, J.: Reliably processable steel for chassis components with high structural durability. Konferenz-Einzelbericht: SCT 2011 – Steel in Cars and Trucks, S. 698–707, Salzburg, 5.–9. Juni 2011
Diekmann, U., Rogall, C.-M., Säuberlich, T., Frehn, A.: High Strength Air-Hardening Steels for Automotive Applications, Konferenz-Einzelbericht: Materials Science & Technology 2007 Conference and Exhibition. S. 111–122, Sep 2007
Lund, T., Ölund, P., Sjöstrand, M., Sandqvist, H.: Ovatec 277 ™ – ein neuer Einsatzstahl für Bauteile hoher Qualität mit Lufthärtbarkeit. Ovako Steel, Technischer Bericht, Bd. 1 (2002)
N.N.: Stahlentwicklung LH800 für die aktuelle Mercedes E-Klasse. Salzgitter entwickelt den Werkstoff in kürzester Zeit. Stahlmarkt, Heft 12/2009
Gottstein, G.: Physikalische Grundlagen der Materialkunde, 3. Aufl. Springer, Berlin Heidelberg (2007)
Bhadeshia, H., Honeycombe, R.: Steels – Microstructure and Properties, 3. Aufl. Butterworth Heinemann - Elsevier, Oxford (2006)
Song, R., Ponge, D., Raabe, D., Speer, J.G., Matlock, D.K.: Review – overview of processing, microstructure and mechanical properties of ultrafine grained bcc materials. Mater Sci Eng A 441, 1–17 (2006)
Lesch, C.: Grain refinement of cold rolled low carbon steels by rapid transformation annealing (RTA). Dissertation, RWTH Aachen. Shaker Verlag, Aachen (2006)
Lesch, C., Bleck, W., Álvarez, P., Gil Sevillano, J., Petitgand, H., Sartini, J.C., Le Corre, C., Schöttler, J.: Grain refinement of cold rolled microalloyed steels by rapid transformation annealing, ECSC final report, EUR 22008 EN, Luxembourg (2006)
Lesch, C.: Strengthening of cold rolled HSLA steels by rapid transformation annealing (RTA).In: Proceedings of Super-High Strength Steels Conference, Peschiera del Garda, Verona, Italien 17.–20. Okt 2010
Morimoto, T., Chikushi, I., Kurahashi, R., Yanagimoto, J.: Mathematical modelling for microstructure evolution and development of ultra fine grained plain carbon steel in a tandem hot strip mill. Steel Res Int 76(7), 514–520 (2005)
Weng, Y.: Ultra-Fine Grained Steels. In: Weng, Y. (Hrsg.) Metallurgical Industry Press, Beijing (2009). Springer GmbH, Berlin, Heidelberg
T. Mochida et al.: Kaltgewalztes Stahlblech mit ultrafeinem Korngefüge und Verfahren zu dessen Herstellung, Patent DE 603 00 835 T2, Anmelder JFE Steel Corporation, Veröffentlichung 27.Okt 2005
Tsuji, N., Ito, Y., Ueji, R.,Minamino, Y., Koizumi, Y., Saito, Y.: Mechanical properties of ultrafine grained ferritic steels produced by accumulative rollbonding (ARB) process. In: Proceedings of the International Symposium on Ultrafine Grained Steels (ISUGS 2001), The Iron and Steel Institute of Japan, S. 256–259, Fukuoka, 20.–22. November 2001
Tsuji, N., Ito, Y., Saito, Y., Minamino, Y.: Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing. Scripta Mater 12(47), 893–899 (2002)
Hodgson, P.D., Hickson, M.R., Gibbs, R.K.: Ultrafine ferrite in low carbon steel. Scripta Mater 40(10), 1179–1184 (1999)
Takaki, S., Kawasaki, K., Kimura, Y.: Mechanical properties of ultra fine grained steels. J Mater Process Technol 117, 359–363 (2001)
Dahl, W., Rees, H.: Festigkeitssteigerung durch Kornfeinung. Grundlagen des Festigkeits- und Bruchverhaltens. In: Dahl, W. (Hrsg.) Stahleisen, Düsseldorf (1974)
Kühne, K.: Einfluss des Spannungszustandes und des Gefüges auf die Spaltbruchspannung von Baustählen. Dissertation, RWTH Aachen, Aachen (1982)
Weng, Y., Zhao, P., Dong, H.: Recent development of new generation steels in China. In :3rd International Conference On Advanced Structural Steels, Gyeongju, 22.–24. August 2006, 22-PL-3
Wendl, F., Hänsch, W., Höfel, P.: Perlitfreier Feinkornstahl – Problemlöser im Automobilbau. Blech Rohre Profile, Bd. 11. S. 16–18 (2008)
Seto, K., Funakawa, Y., Kaneko, S.: Hot rolled high strength steels for suspension and chassis parts NANOHITEN and BHT Steel. JFE Technical Report, Bd. 10., S. 19–25 (2007).
Funakawa, Y., et al.: High strength hot rolled steels and method for producing thereof, Patent EP 1338665 A1, Anmelder Nippon Kokan KK, Veröffentlichung, 27. August 2003
Schäperkötter, M.; Stehlin, M.; Wans, J.; Spitzer, K. H.: Hochleistungsstahl am laufenden Band. Siehe http://dlugosch.org/Leichtbau/tabid/62/Default.aspx unter 3.3 HSD-Stahl. Vortrag beim Fachpressetag Fit statt fett in der Fertigung (EADS, Ottobrunn) zum Thema Leichtbau, 5. Juli 2007
Kwon, O., Kim, S., Cho, J., Kwak, W., Kim, G.: Development of TWIP steel for automotive applica-tion, Posco, Korea. In : Proceedings 3rd International Steel Conference on New Developments in Metallurgical Process Technologies (METEC InSteelCon) S. 690–697. Düsseldorf, 11.–15. June 2007
Schumann, H.: Metallographie. Dt. Verlag für Grundstoffind, Leipzig (1991)
Frommeyer, G.: Die Singularitäten des Eisnes bestimmen die universellen Eigenschaften der Stähle – Teil 3. Stahl Eisen 127(12), 67–82 (2007)
Baruj, A., Cotes, S., Sade, M., Fernandez-Guillermet, A.: Effects of thermal cycling on the fcc/hcp martensitic transformation temperatures in Fe-Mn alloys. Z Met 87(10), 765–772 (1996)
Chang, S., Jahn, M., Pan, Y., Wang, C.: Age strengthening of Fe-Mn-Al stainless steels. Proceedings of the 7th International Conference on the Strength of Metals and Alloys, Montreal. (1985)
Schumann, H.: Die martensitischen Umwandlungen in kohlenstoffarmen Manganstähle. Arch Für Das Eisenhüttenwes (8), 647–656 (1967)
Grässel, O.: Entwicklung und Charakterisierung neuer TRIP/TWIP Leichtbaustähle auf der Basis Fe-Mn-Al-Si. Dissertation TU Clausthal (2000)
Sato, K., Ichinose, M., Hirotsu, Y., Inoue, Y.: Effects of deformation induced phase transformation and twinning on the mechanical properties of Austenitic Fe-Mn-Al alloys. Isij Int 29(10), 868–877 (1989)
Becker, J.U., Thomas, I., Göklu, S., Hofmann, H., Richter, H., X-IP 1000: properties of an austenitic super high strength high manganese steel – status and outlook. Konferenz-Einzelbericht: SCT2008, 2nd International Conference on Steels in Cars and Trucks, Future trends in steel development, processing technologies and applications, (S. 34–42) Wiesbaden, Germany. Verlag Stahleisen, Düsseldorf, 1.–4. June 2008
Kim, S.K., Kim, G., Chin, K.G.: Development of high Manganese TWIP steel with 980 MPa tensile strength. In :International Conference on New Developments in Advanced High-Strength Sheet Steels, Orlando, 15.–18. June 2008
Chen, L., Voswinckel, H., Han Kim, S., Kim, S.K., Kim, G.S., De Cooman, B.C.: Stretch-flangeability of TWIP Steel,, International Conference on New Developments in Ad-vanced High-Strength Sheet Steels, Orlando, 15.–18. June 2008
Roller, R., et al.: Fachkunde für gießereitechnische Berufe – Technologie des Formens und Gießens, 6. Aufl. Europa-Lehrmittel (2009)
Bäumer, A., Bork, C.P., Emde, T., Evertz, T., Masendorf, R., May, U., Menne, M., Ratte, E., Steinbeck, G.: Ermittlung des Werkstoffverhaltens und des Beschichtungseinflusses durch rechnerische Methoden zur Verkürzung der Entwicklungszeiten im Fahrzeugbau mit Stahl, Abschlussbericht, P 603. Forschungsvereinigung für Stahlanwendunge (2007). ISBN 3937567488
Hecker, S.S., Stout, M.G., Staudhammer, K.P., Smith, J.L.: Effects of strain state and strain rate on deformation induced transformation in 304 stainless steel: part I magnetic measurements and mechanical behaviour. Met Trans A 13A, 619–626 (1982)
Högerl, J., Richter, A., Schlerkmann, H.: Prüfung von hochfesten Stählen für den Automobilbau. Tagungsband, GfKORR-Jahrestagung. Frankfurt, 3. Nov 2009
Fischer, H., Georgeou, Z., Otto, M., Schäperkötter, M., Schmidt-Jürgensen, R.: Recent developments and future potentials of near net shape casting belt strip technology. In: Proceedings of Conference Thermec 2009, Berlin, 25.–29. August 2009
Stein, F., Palm, M.: Re-determination of transition temperatures in the Fe-Al system by differential thermal analysis. Int J Mat Res 98(7), 580–588 (2007)
Frommeyer, G., Drewes, E.J., Engl, B.: Phyisical and mechanical properties of iron-aluminuim-(Mn, Si) lightweight steels. La Revue De Métallurgie-cit, 1245–1253 (2002)
Deevi, S.C., Sikka, V.K., Liu, C.T.: Processing, properties, and applications of nickel and iron aluminides. Prog Mater Sci 42, 177–192 (1997)
Morris, D.G., Gunther, S.: Room and high temperature mechanical behaviour of a Fe3Al-based alloy with a-a’ microstructure. Acta Mater 45, 811–822 (1997)
Palm, M.: Concepts derived from phase diagram studies for strengthening of Fe-Al-based alloys. Intermetallics 13, 1286–1295 (2005)
Bahadur, A.: Enhancement of high temperature strength and room temperature ductility of iron aluminides by alloying. Mater Sci Technol 19, 1627–1634 (2003)
Kim, S.M., Morris, D.G.: Long range order and vacancy properties in Al-Rich Fe3al And Fe3Al(Cr) Alloys. Acta Mater 46, 2587–2602 (1998)
Morris, D., Dadras, M., Morris, M.: The influence of chromium additions on order and ductility in Fe3Al intermetallic. J De Physique IV3, 429–434 (1993)
McKamey, C.G., Maziasz, P.J., Goodwin, G.M., Zacharia, T.: Effects of alloying additions on the microstructures, mechanical properties and weldability of Fe3Al-based alloys. Mater Sci Eng A 174, 59–70 (1994)
Morris, D.G.: Possibilities for high-temperature strengthening in iron aluminides. Intermetallics 6, 753–758 (1998)
McKamey, C., Horton, J.: The effect of molybdenum addition on properties of iron aluminides. Met Trans A 20, 751–757 (1989)
Baiyang, L., Maosen, L., Xiaobing, C., Zhiyuan, M.: Influence of Mn addition on the ordering of D03 Fe-28 %Al intermetallics. J Mater Sci 34, 4039–4042 (1999)
Schneider, A., Falat, L., Sauthoff, G., Frommeyer, G.: Microstructures and mechanical properties of Fe3Al-based Fe-Al-C alloys. Intermetallics 13, 1322–1331 (2005)
Kim, W., Ruano, O.A., Wolfensteine, J., Frommeyer, G., Sherby, O.D.: Superplastic behavior of a kappa carbide material (Fe3AlCx). J Mater Res 12, 2317–2324 (1997)
Cadel, E., Lemarchand, D., Gay, A., Fraczkiewicz, A., Blavette, D.: Atomic scale investigation of boron nanosegregation in FeAl intermetallics. Scripta Mater 41, 421–426 (1999)
Klein, O., Baker, I.: Effect of heat-treatment on the tensile behavior of iron-rich FeAl and FeAl-B. Scripta Met Mater 30, 627–632 (1994)
Liu, C.T., Wright, J.L., Stoloff, N.S.: Effect of Zr and C additions on environmental embrittlement of Fe-28Al-5Cr aluminide. Scripta Mater 38, 1601–1606 (1998)
McKamey, C.G., Stoloff, N.S., Sikka, V.K. (Hrsg.): Physical Metallurgy and processing of Intermetallic Compunds Iron Aluminides. Chapman and Hall, S. 351–390 (1996)
Marcinkowski, M.J., Brown, N.: Direct observation of antiphase boundaries in the Fe3Al superlattice. J Appl Phys 33, 537–552 (1962)
George, E.P., Baker, I.: Thermal vacancies and the yield anomaly of FeAl. Intermetallics 6, 759–763 (1998)
Frommeyer, G., Brüx, U.: Microstructures and Mechanical Properties of High-Strength Fe-Mn-Al-C Light-Weight TRIPLEX Steels. Steel Res Int 77(9–10), 627–633 (2006)
Brüx, U.: Mikrostrukturen und Eigenschaften ultrahochfester Leichtbaustähle auf der Basis Fe-Mn-Al-C. Dissertation TU Clausthal (2007)
EAA: The Aluminium Automotive Manual (http://www.alueurope.eu/?page_id=8284)
Ostermann, F.: ANWENDUNGSTECHNOLOGIE ALUMINIUM. Springer, Berlin Heidelberg New York (1998)
Altenpohl, D.G.: Aluminum: Technology, Applications and Environment. The Aluminum Association, Washington (1998)
Kammer, C.: ALUMINIUM TASCHENBUCH Bd. 1. Aluminium-Verlag, Düsseldorf (2002)
Aluminium-Zemtrale e.V.: Düsseldorf ALUMINIUM TASCHENBUCH Bd. 2. Aluminium-Verlag, Düsseldorf (1999)
Aguilar, J., Hecht, U., Schievenbusch, A.: Materials Science Forum Bd. 638. Trans Tech Publications, Zürich, S. 1275–1280 (2010). bis Bd. 642
Furrer, P., Bloeck, M.: ALUMINIUM-KAROSSERIEBLECHE. sv corporate media, München (2007)
Furrer, P.: ALUMINIUM-WERKSTOFFVERBUNDE ERÖFFNEN NEUE ANWENDUNGSPOTENZIALE Tagungsband T29. EFB Hannover., S. 85–94 (2008)
Furrer, P., Harings, R.: FUSION-VERBUNDBLECHE FÜR DEN AUTOMOBILBAU ATZ Special Karosserie und Bleche, S. 18-21, Okt. 2010
Aluminium-Zemtrale e.V.: Düsseldorf ALUMINIUM TASCHENBUCH Bd. 3. Aluminium-Verlag, Düsseldorf (2003)
Georg Fischer Automotive: Interne Aufstellung, Stand 2011
Kiehl, P., et al.: Einführung in die DIN-Normen, 13. Aufl. S. 528 (2001)
Karl Konzelmann GmbH: Aluminium Gußlegierungen, Broschüre, vor 2005
Aluminium Rheinfelden: Hütten-Aluminium – Druckguss-Legierungen, (2. Aufl.), 2007, http://www.rheinfelden-alloys.eu/c/document_library/get_file?p_l_id=78483&folderId=51634&name=DLFE-425.pdf (zuletzt aufgerufen 27. November 2012)
Georg Fischer Automotive: Produktkatalog, Stand 2015
Georg Fischer Automotive: 2006
Georg Fischer Automotive: Produktkatalog, Stand 2011
DGS Druckguss Systeme AG: Produktkatalog, Stand 2012
VAW-IMCO Guss und Recycling GmbH: Aluminium-Gusslegierungen, (3. Aufl.), S. 67ff. und 75–79 (2007)
VAW-IMCO Guss und Recycling GmbH: Aluminium-Gusslegierungen, (3. Aufl.), S. 71ff. und 75–79 (2007)
Song, G.-L.: Corrosion of Magnesium Alloys. Woodhead Publishing (2011). ISBN 9781845697082
Bettles, C., Barnett, M.: Advances in wrought magnesium alloys: properties, processing and applications. Woodhead Publishing (2012). ISBN 9781845699680
Kainer, K.U.: Metallische Verbundwerkstoffe. Wiley-VCH (2003). ISBN 3527305327
Emley, E.F.: Principles of Magnesium Technology. Pergamon Press (1966)
Hollemann, A.F., Wiberg, E.: Lehrbuch der anorganischen Chemie. Walter de Gruyter (1985). ISBN 3110075113
Strelez, C.L., Taiz, A.J., Guljanitzki, B.S.: Metallurgie des Magnesiums. VEB Verlag Technik, Berlin (1953)
Friedrich, H.E., Mordike, B.L.: Magnesium Technology. Springer (2006). ISBN 9783540205999
Kammer, C.: Magnesium-Taschenbuch. Alumiumverlag, Düsseldorf (2000). ISBN 3870172649
ASTM Designation B 275–05
Dunlop, G.L., et al.: Microstructure and properties of magnesium alloy high pressure die castings, Mg 97. Proceedings of 1st Israeli International Conference on Magnesium Science and Technology., S. 108–115 (1997)
Luo, A.A.: Mat. Sci. Forum 419–422, 57–66 (2003)
Aghion, E., et al.: Magnesium Technology. In: Luo, A.A. (Hrsg.) S. 167–172. TMS (2004)
Pekguleryuz, M.O., Kaya, A.A.: Magnesium Technology. In: Luo, A.A. (Hrsg.) Bd. 2004, S. 281–287. TMS (2004)
Baril, E., et al.: SAE Technical Paper Series 2004-01-0659
Bettles, C.J., Forwood, C.T., StJohn, D.H., Frost, M.T., Jones, D.S., Qian, M., Song, G.-L., Griffiths, J.R., Nie, J.F.: AMC-SC1:An elevated temperature magnesium alloy suitable for precission sand casting of powertrain components. In: Kalpan, H.I. (Hrsg.) Magnesium Technology, Bd. 2003, S. 223–226. TMS (2003)
Dieringa, H., Kainer, K.U.: Technologische Eigenschaften und Potential von Magnesiumlegierungen. Giesserei-Rundschau 56(7/8), 114–119 (2009)
Zeumer, N., et al.: New develeopments in casting of magnesium. Proc. Int. Conf. Magnesium Technology, London., S. 18–24 (1987)
Unsworth, W., King, J.F.: Recent casting alloy developments. In. Proc. Int. Conf. Magnesium Technology, London., S. 25–36 (1987)
King, J.F.: Development of practical high temperature magnesium casting alloys. In: Kainer, K.U. (Hrsg.) Magnesium Alloys and their Applications, S. 14–22. Wiley (2000)
StJohn, D.H., Qian, M., Easton, M.A., Cao, P., Hildebrand, Z.: Met Mater Trans 36A, 1669–1679 (2005)
Gunther, R., Hartig, C., Anopuo, O., Hort, N., Bormann, R.: Magnesium Technology Symposium 2008. In: Pekguleryuz, M.O., Neelameggham, N.R., Beals, R.S., Nyberg, E.A. (Hrsg.) S. 95–99. New Orleans (2008)
http://www.intlmag.org/files/yend1985.pdf. http://www.intlmag.org/files/yend2000.pdf
Letzig, B.D., Kainer, K.U.: Proceedings of the Beijing International Materials Week. (2006)
Bohlen, J., Nürnberg, M.R., Senn, J.W., Letzig, D., Agnew, S.R.: Acta Mater 55, 2101–2112 (2007)
Kainer, K.U., Wendt, J., Kurz, G., Fuskova, L., Bohlen, J., Letzig, D.: Gefuegeentwicklung als Werkzeug zur Optimierung von Magnesium-Knetlegierungen. In: Rettenberger, M., Kneiss, A. (Hrsg.) Materialographie, Metalle-Keramik-Polymere, S. 25–34 (2008)
Watari, H., Davey, K., Rasgado, M.T., Haga, T., Izawa, S.: J Mater Process Technol 155–156, 1662–1667 (2004)
Kurz, G., Sillekens, W.H., Swiostek, J., Letzig, D.: Proceedings of the 15. Magnesium Abnehmer- und Automotive Seminar (2007)
Schichtel, G.: Magnesium-Taschenbuch. VEB Verlag Technik, Berlin (1954)
VDI Werkstoff Magnesium, VDI Verlag GmbH, Berlin (1938)
Roberts, C.S.: Magnesium and its Alloys. Wiley, London (1960)
Avedesian, M.M., Baker, H.: ASM Specialty Handbook Magnesium. ASM International Materials Park (1999)
Scharf, C., Blawert, C., Ditze, A.: Magnesium Alloys and Their Applications. Wiley, Wolfsburg (2003)
Franke, G.: Sinomag Die Casting Magnesium Seminar, PRC. Private Publisher, Beijing (2000)
Argo, D., Forakis, P., Lefebvre, M.: Symposium on Magnesium Technology 2003 held at the 2003 TMS Annual Meeting. Minerals, Metals & Materials Soc, San Diego (2003)
Petrovich, V.W., Waltrip, J.S.: World Magnesium Conference. International Magnesium Association, Washington (1988)
Pinfold, P.M.D., Oymo, D.: Sae Tech Pap Ser, 65–70 (1993)
The European Parliament and the Council of the European Union, Directive 2000/53/EC of the European Parliament and of the Council of 18: On end-of-life vehicles. Off. J. Eur. Communities 2000, 34–42 (September 2000)
Blawert, C., et al.: 65th Annual World Magnesium Conference. International Magnesium Associatio, Warsaw (2008)
Ditze, et al.: Magnesium Alloy. Technische Universität, Clausthal, S. 23 (2006). D, GKSS-Forschungszentrum Geesthacht GmbH
Fechner, D., et al.: Science in China. Ser E-technological Sci 52(1), 148–154 (2009)
Dieringa, H.: J Mat Sci 46(2), 289–306 (2011)
ASM Composites, ASM Handbook, Bd. 21, S. 38 (2001)
Dieringa, H.: In: Kainer, K.U. (Hrsg.) Metal Matrix Composites, S. 55–76. Wiley-VCH. ISBN 3527313605
Sklenicka, V., Pahutova, M., Kucharova, K., Svoboda, M., Langdon, T.G.: Key Engin. Mat 171–174, 593–600 (2000)
Dieringa, H., Hort, N., Kainer, K.U.: Proc. of Processing and Fabrication of Advanced Materials XVI 2007 (PFAM XVI). S. 248–255 (2008). ISBN 9789810596507
Kumar, S., Ingole, S., Dieringa, H., Kainer, K.U.: Comp Sci Techn 63, 1805–1814 (2003)
Hermann Starck, C.: Firmenprospekt, Goslar
Firmenprospekt Wacker Ceramics, Kempten
Firmenprospekt Electro Abrassives, Bufallo
Ferkel, H., Mordike, B.L.: Mater Sci Eng A298, 193–199 (2001)
Ugandhar, S., Gupta, M., Sinha, S.K.: Solid State Phenom 111, 79–82 (2006)
Wong, W.L.E., Gupta, M.: Solid State Phenom 111, 91–94 (2006)
Trojanova, Z., Lukac, P., Ferkel, H., Mordike, B.L., Riehemann, W.: Mater Sci Eng A234–236, 798–801 (1997)
Hassan, S.F., Gupta, M.: Met Mater Trans 36A, 2253–2258 (2005)
Wong, W.L.E., Karthik, S., Gupta, M.: J Mater Sci 40, 3395–3402 (2005)
Hassan, S.F., Gupta, M.: J Alloys Compd 457, 244–250 (2008)
Hassan, S.F., Gupta, M.: Mater Sci Eng A425, 22–27 (2006)
Hassan, S.F., Gupta, M.: J Alloys Compd 419, 84–90 (2006)
Srikanth, N., Zhong, X.L., Gupta, M.: Mater Lett 59, 3851–3855 (2005)
Han, B.Q., Dunand, D.C.: Mater Sci Eng A277, 297–304 (2000)
Han, B.Q., Dunand, D.C.: Mater Sci Eng A300, 235–244 (2001)
Garces, G., Rodriguez, M., Perez, P., Adeva, P.: Mater Sci Eng A419, 357–364 (2006)
Lee, C.J., Huang, J.C., Hsieh, P.J.: Scripta Mater 54, 1415–1420 (2006)
Morisada, Y., Fujii, H., Nagaoka, T., Fukusumi, M.: Mater Sci Eng A419, 344–348 (2006)
Goh, C.S., Wie, J., Lee, L.C., Gupta, M.: Mater Sci Eng A423, 153–156 (2006)
Goh, C.S., Wie, J., Lee, L.C., Gupta, M.: Solid State Phenom 111, 179–182 (2006)
Schauerte, O.: Titanium and Titanium Alloys. In: Leyens, C., Peters, M. (Hrsg.) S. 467–482. Wiley, Weinheim (2003)
Friedrich, H., Kiese, J., Haldenwanger, H.-G., Stich, A.: Ti-2003 – Science and Technology. In: Lütjering, G., Albrecht, J. (Hrsg.) Bd. V, S. 3393–3402. Wiley (2004)
Peters, M., Leyens, C.: Titanium and Titanium Alloys. In: Leyens, C., Peters, M. (Hrsg.) S. 393–422. Wiley, Weinheim (2003)
Wagner, L., Schauerte, O.: Ti-2007 – Science and Technology. In: Niinomi, M. (Hrsg.) The Japan Inst. Metals, Bd. II, S. 1371–1378 (2007)
Peters, M., Leyens, C.: Titan im Automobilbau. Metall 64(6), 236–239 (2010)
Peters, M., Hemptenmacher, J., Kumpfert, J., Leyens, C.: Titanium and Titanium Alloys. In: Leyens, C., Peters, M. (Hrsg.) S. 1–36. Wiley, Weinheim (2003)
Peters, M., Clemens, H.: Berg- Hüttenmännische Monatshefte 155(9), 402–408 (2010)
Appel, F., Öhring, M.: Titanium and Titanium Alloys. In: Leyens, C., Peters, M. (Hrsg.) S. 89–152. Wiley, Weinheim (2003)
Kestler, H.C.: H.: Titanium and Titanium Alloys. In: Leyens, C., Peters, M. (Hrsg.) S. 351–392. Wiley, Weinheim (2003)
Leyens, C.: Titanium and Titanium Alloys. In: Leyens, C., Peters, M. (Hrsg.) S. 187–230. Wiley, Weinheim (2003)
Kosaka, Y., Fox, S.P., Faller, K.: JOM 56, 32–34 (2004)
Otsuka, H., et al.: Ti-2007 – Science and Technology. In: Niinomi, M. (Hrsg.) The Japan Inst. Metals, Bd. I, S. 251–254. (2007)
Sibum, H., Kiese, J., Müller, G.: Ti-2007 – Science and Technology. In: Niinomi, M. (Hrsg.) The Japan Inst. Metals, Bd. II, S. 1083–1086 (2007)
Peters, M.: MB-Revue. Maschinenbau Jahreshaupt 2009, S. 72–79 (2009)
Wollmann, M., Wagner, L., Kiese, J.: Properties and applications of Titanium alloys in transport. Proceedings of 12th World Conference on Titanium – Ti-2011, Beijing. (2011)
Kocan, M., Yazgan-Kokuoz, B., Rack, H.J., Wagner, L.: JOM. 66–68 (2005)
Clemens, H.: Berg- Hüttenmännische Monatshefte 153, 337–341 (2008)
Eberhardt, N., et al.: Z Met 89, 772–778 (1998)
Tetsui, T.: Adv Eng Mater 3, 307–310 (2001)
Gadow, R., Kern, F., Wenzelburger, M., von Niessen, C.: Stofflicher Leichtbau mit Sinterkohlenstoff und Verbundwerkstoffen, Themenheft Forschung der Universität Stuttgart, Thema Leichtbau (2007)
Buchmann, M., Gadow, R., Scherer, D., Speicher, M.: Ceramic matrix-and layer-composites in advanced automobile technology. In: Singh, J.P., Bansal, N.P., Singh, M. (Hrsg.) Advances in Ceramic Matrix Composites VIII Ceramic Transactions, Bd. 139, S. 3–18. The American Ceramic Society, Westerville (2002). ISBN 1574981544
Kurz, G., Müller, R., Fischer, G.: Bremsanlage und Schlupfregelungssysteme in der neuen Baureihe 5 von BMW. Automobiltech. Z. 98(4), 188–198 (1996)
Gadow, R., Speicher, M.: Manufacturing and CMC component development for brake disks in automotive applications. In: Gadow, R. (Hrsg.) Advanced Ceramics and Composites, S. 301–312. expert (2000). ISBN 3816918301
Stappen, H.J.: Packendes Duell. Ams Auto Motor Sport 17, 50–53 (2000)
Hillig, W.B., et al.: General Electric Techn. Inform. Serv. 74 CRD 282 (1974)
Fitzer, E., Gadow, R.: Fiber reinforced silicon carbide. Am Ceram Soc Bull 65(2), 326–335 (1986)
Gadow, R., Speicher, M.: Manufacturing of ceramic matrix composites for automotive applications. In: Bansal, P. (Hrsg.) Advances in Ceramic Matrix Composites VII Ceramic Transactions, Bd. 128, S. 25. The American Ceramic Society (2001). ISBN 1574981366
Phillips, D.C.: Fiber reinforced ceramics. In: Kelly, A., Mileiko, S.T. (Hrsg.) Handbook of Composites, Bd. 4, S. 373–428. Elsevier (1993). ISBN 0444864474
Flemming, M., Roth, S., Ziegmann, G.: Faserverbundbauweisen. Springer (1999). ISBN 3540616594
Speicher, M.F.: Kohlenstofffaserverstärkte SiC - Keramiken für Leichtbau – Bremsscheiben, IFKB Forschungsberichte. In: Gadow, R. (Hrsg.) D 93. Dissertation, Fakultät für Maschinenbau, Universität Stuttgart. Shaker, Aachen (2002). ISBN 3832219722. ISSN 1610-4803
Berreth, K., Gadow, R., Speicher, M.: Fiber reinforced ceramic and method for producing the same. International Patent EP1154970 WO 00/41982 (2004)
Jungnickel, B.J.: Physik und Werkstoffkunde von Polymerlegierungen und -mischungen. Vortrag Deutsches Kunststoff Institut (DKI), Darmstadt. (1992)
Paul, D.R., Newmann, S.: Polymer Blends. Academie, New York (1978)
Sok, K.: Polymer Compatibility and Incompatibility – Principles and Practices. Harwood, New York (1982)
Kaiser, W.: Kunststoffchemie für Ingenieure. Carl Hanser, München Wien (2006)
Michaeli, W.: Einfügung in die Kunststoffverarbeitung. Carl Hanser, München Wien (1999)
Eyerer, P., Hirth, T.: Polymer Engineering – Technologie und Praxis. Springer, Berlin Heidelberg (2008)
Dominighaus, H.: Die Kunststoffe und ihre Eigenschaften. Springer, Berlin Heidelberg (2005)
Pfaender, R.: Additive und Recyclat. Carl Hanser, München Wien, S. 76–79 (1999). Kunststoffe
Hund, M., Gores, F.: Qualitätssicherung Additive, Ein Buch mit sieben Siegeln? Kunststoffe, 72–74 (2003)
Zweifel, H., Maier, R., Schiller, M.: Plastics Additives Handbook. Carl Hanser, München Wien (2009)
Papst, F., Oberbach, K.: Sächtling – Kunststoff Taschenbuch. Carl Hanser, München Wien (1995)
Neitzel, M.: Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Additive. Carl Hanser, München Wien (2004)
Steuernagel, L.: Naturfasern – Neue Möglichkeiten zur Einstellung definierter Eigenschaften in Kunststoffverbunden, Fachagentur für Nachwachsende Rohstoffe
Wambua, P., Ivens, J., Verpoest, I.: Natural fibres: can they replace in fibre reinforced plastics? Compos Sci Technol 62, 1259–1264 (2003)
Flemming, M., Ziegmann, G., Roth, S.: Faserverbundbauweisen Fasern und Matrices. Springer, Berlin Heidelberg (1995)
Wypych, G.: Handbook of Fillers. Chem Tec Publishing, Toronto (2010)
Din ISO 527
Rettig, W.: Mechanik der Kunststoffe. Carl Hanser, München Wien (1992)
Ehrenstein, G.: Polymer-Werkstoffe: Struktur – Eigenschaften – Anwendungen. Carl Hanser, München Wien (1999)
Schulte, K., Gojny, F.H., Wichmann, W.H.G., Sumfleth, J., Fiedler, B.: Polymere Nanoverbundwerkstoffe: Chancen, Risiken und Potenzial zu Verbesserung der mechanischen und physikalischen Eigenschaften. WILEY, Weinheim. Materialwiss. Werkstoff. 37(9), 298–703
Cvjeticanin, N.: Akustische Eigenschaften von technischen Kunststoffen und deren Produkten in Kraftfahrzeugen. IKV Berichte aus der Kunststoffverarbeitung, Bd. D82. Mainz (1999). Dissertation RWTH Aachen
Spingler, M., Glom, F.: Methodische Erfassung der human wahrgenommenen Qualitätsaspekte Kunststofftechnik - Kunststoffe im Automobilbau. VDI, Düsseldorf (2011)
Hellerich, W., Harsch, G., Haenle, S.: Werkstoff-Führer Kunststoffe. Eigenschaften – Prüfungen – Kennwerte. Carl Hanser, München Wien (2004)
Scholze, H.: Glas – Natur Struktur und Eigenschaften. Springer, Berlin Heidelberg (1988)
Twardon, G., Wagner, Th.: Alterung und Beständigkeit von Kunststoffen. In: Eyerer, P. (Hrsg.) Kunststoffkunde Vorlsungsmanuskript, WS2007/08, 14. Aufl. Fraunhofer ICT, Pfitztal (2007)
Frank, A.: Kunststoff-Kompendium: Herstellung, Aufbau, Verarbeitung, Anwendung, Umweltverhalten und Eigenschaften der Thermoplaste, Polymerlegierungen, Elastomere und Duroplaste. Vogel, Würzburg (2000)
Dolezel, B.: Die Beständigkeit von Kunststoffen und Gummi. Carl Hanser, München Wien (1978)
Eckstein, L., Ickert, L., Goede, M.: Belastungsgerechte Leichtbaustrukturen im Automobil aus Faserverbundstrukturen. Springer, München (2010). Automotive Media, ATZ
Sahr, C., Berger, L., Lesemann, M.: Systematische Werkstoffauswahl für die Karosserie des SuperLight –Car. Springer, München (2010). Automotive Media, ATZ
Eckstein, L.: Forschungsschwerpunkte für das Automobil der Zukunft. Automotive Media, ATZextra 125 Jahre Automobil. Springer, München (2011)
Gayer, U.: Inmould Decoration – Folientechnologie für Interieurbauteile. Kunststofftechnik - Kunststoffe im Automobilbau. VDI, Düsseldorf (2011)
N. N.: Dreidimensionale Kunststoffdekoration. Firmenschrift Fa. Leonhard Kurz, Fürth
N. N.: Stand der IMD-Technik – fertig dekorierte Formteile in einem Arbeitsgang. Firmenschrift Fa. Leonhard Kurz, Fürth
Johannaber, F., Michaeli, W.: Handbuch Spritzgießen. Carl Hanser, München Wien (2001)
Hubert-Heßelberger, J., Stump, K.-H.: TPO-Tiefziehfolien für zweifarbige Instrumententafeln. Kunststofftechnik - Kunststoffe im Automobilbau. VDI, Düsseldorf (2010)
Schwarzmann, P.: Thermoformen in der Praxis. Carl Hanser, München Wien (2008)
Patentschrift (DE 102005 005576 A1) der Firma Benecke-Kaliko (2006)
Petry, M., Rau, W.: Sitzen Sie bequem? Kunststoffe. Carl Hanser, München Wien, S. 52–55 (2010)
Starke, C., Lee, E.C., Sander, D.: Schaumspritzgießen – Technologie und Anwendungen. Kunststofftechnik - Kunststoffe im Automobilbau. VDI, Düsseldorf (2012)
Risch, H., Ries, T., Vöge, F., Broos, L.: Nutzung von Kunststoff-Metall-Hybrid-Anbauteilen in der Karosseriestruktur des neuen Audi A 8. Kunststofftechnik - Kunststoffe im Automobilbau. VDI, Düsseldorf (2010)
Jessberger, T., Bühler, A., Engel, A.: Motoren in 10–20 Jahren. Kunststoffe. Carl Hanser, München Wien, S. 72–76 (2010)
Braess, H.-H., Seiffert, U.: Vieweg Handbuch der Kraftfahrzeugtechnik. Vieweg & Sohn, Braunschweig, Wiesbaden (2000)
Fischer, K.: Elektromobilität und Leichtbau. Kunststoffe. Carl Hanser, München Wien, S. 52–56 (2012)
Kircher, O., Derks, M., Garth, I., Brunner, T.: Hochleistungskomposites für kyrogene Wasserstoff Druckspeicher. Kunststofftechnik - Kunststoffe im Automobilbau. VDI, Düsseldorf (2010)
Sauren, S.: Neue Wege in der SMC-Technologie. SMC-Hybriddeckel – Eigenfertigung bei Mercedes Benz. Kunststofftechnik - Kunststoffe im Automobilbau. VDI, Düsseldorf (2010)
Berlitz, S.: Einfluss von Kunststoffen auf Designtrends und Funktionsinnovationen der Automobilbeleuchtung. Kunststofftechnik – Kunststoffe im Automobilbau. VDI, Düsseldorf (2012)
Günnel, T.: Leichtbau und Design mit Kunststoffen. Automobil Industrie. Vogel, Würzburg (2012)
Institut für Flugzeugbau (IFB). In: Vorlesung Fertigungstechnik und Bauweisen für Leichtbaukonstruktionen, Universität Stuttgart (2012)
Voith Composites GmbH & Co. KG
Boeing
Lehrstuhl für Carbon Composites (LCC), TU München
KARL MAYER Textilmaschinenfabrik GmbH
Liba Maschinenfabrik GmbH
R&G Faserverbundwerkstoffe GmbH
Eurocopter Deutschland GmbH
Institut für Flugzeugbau (IFB), Universität Stuttgart
Automobili Lamborghini S.p.A
BMW AG
Teufelberger GmbH
Lehrstuhl für Carbon Composites (LCC). In: Vorlesung Auslegung und Bauweisen von Composite Strukturen, TU München (2012)
Schürmann, H.: Konstruieren mit Faser-Kunststoff-Verbunden. Springer, Berlin Heidelberg (2007)
Jones, R.: Mechanics of Composite Materials. Taylor & Francis (1999)
Lehrstuhl für Carbon Composites (LCC). In: Vorlesung Materialmodellierung und Prozesssimulation von Composites, TU München (2012)
Trochu, F., Gauvin, R., Gao, D.M., Boudreault, J.-F.: RTMFLOT – an Integrated software environment for the computer simulation of the resin transfer molding process. J Reinf Plast Compos 13(3), 262–270 (1994)
Allianz SE, http://www.sponsoring.allianz.com/en/
McLaren Automotive Limited, aufgerufen am: 22. November.2012 http://media.mclarenautomotive.com/images/model/4/
Roding Automobile GmbH
ESI Group: PAMCRASH: virtual performance solution 2011 sover reference manual (2011)
Audi AG
Lan, J., Yang, Y., Li, X.: Mater Sci Eng A386, 284–290 (2004)
Abraham, P.D., Simpson, L.J., DeVries, M.J., Callahan, D.E.: Corrosion Behaviour of Stainless Steel-Zirconium Alloy Waste Forms (CORROSION 99), San Antonio, April 25–30, 1999. (1999). Tx NACE International
Mars, G.: Die Spezialstähle. Ihre Geschichte, Eigenschaften, Behandlung und Herstellung, 1. Aufl. F. Enke, Stuttgart (1912)
Morris, D.G., Muñoz-Morris, M.A.: The stress anomaly in FeAl-Fe3Al alloys. Intermetallics 13, 1269–1274 (2005)
Slater, J.C.: Atomic radii in crystals. J Chem Phys 41(10), 3199–3205 (1964)
http://www.salzgitter-flachstahl.de/de/Services/Werkstoffkennwerte/
Tadaki, T., Shimizu, K., Watanabe, T.: Electron microscopic observation of the Austenite and the Martensite in high Aluminium Steel materials transactions. JIM 33(3), 208–214 (1992)
Wedemeier, A., Schulz, T.: Neue Halbzeuge für das Rollprofilieren – Flexibel gewalzte Dualphasenstähle. Konstruktion (11/12), IW4–IW5 (2009)
Xu, L.J., Zhang, G.S., Li, J.W., Dong, Z.W., Wei, S.Z.: Research on microstructure and mechanical properties of high boron cast steel. Adv Mater Res 189(193), 3968–3971 (2011)
Pekguleryuz, M.O., et al.: Magnesium Technology. In: Kaplan, H.I. (Hrsg.) TMS, Bd. 2003, S. 201–206 (2003)
Bain, E.C.: Functions of the alloying elements in steel. Am Soc Met 127 (1939)
Gunther, R., Hartig, C., Hort, N., Bormann, R.: Magnesium Technology Symposium 2009. In: Nyberg, E.A., Agnew, S.R., Neelameggham, M.R., Pekguleryuz, M.O. (Hrsg.) S. 309–313. San Francisco (2009)
Zhang, Q., Chen, D.L.: Scripta Mat 51, 863–867 (2004)
Eckstein, L., Ickert, L.: Zukünftige Fahrzeugkonzepte – Kunststoffe in tragender Rolle. Kunststofftechnik - Kunststoffe im Automobilbau. VDI, Düsseldorf (2011)
Puck, A.: Festigkeitsanalyse von Faser-Matrix-Laminaten: Modelle für die Praxis. Hanser, München, Wien (1996)
Gadow, R., Speicher, M.: Optimized morphological design for silicon infiltrated microporous carbon preforms. Ceram Eng Sci Proc 21(3), 485–492 (2000)
Cornette, D., Cugy, P., Hildenbrand, A., Bouzekri, M., Lovato, G.: UHS FeMn TWIP steels for automotive safety parts. Soc Automot Eng, 1–13 (2005)
DIN EN 10027-2, Bezeichnungssystem für Stähle- Nummernsystem. Beuth Verlag, Berlin (1992)
Hofmann, H, Becker, J.-U., Göklü, S., Richter, H., Thomas, I.: X-IP 1000: properties of an austenitic super high strength high manganese steel – status and outlook. 2nd conference on steels in cars and trucks, SCT2008. Wiesbaden, 1.–5. June 2008
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Fachmedien Wiesbaden
About this chapter
Cite this chapter
Evertz, T. et al. (2017). Die Leichtbauwerkstoffe für den Fahrzeugbau. In: Friedrich, H. (eds) Leichtbau in der Fahrzeugtechnik. ATZ/MTZ-Fachbuch. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-12295-9_6
Download citation
DOI: https://doi.org/10.1007/978-3-658-12295-9_6
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-12294-2
Online ISBN: 978-3-658-12295-9
eBook Packages: Computer Science and Engineering (German Language)