Zusammenfassung
Die Versuchsphase stellt einen entscheidenden Abschnitt in der Entwicklung eines Verbrennungsmotors dar. Die Grundaufgaben umfassen die Validierung der Auslegung des Motors, den Nachweis der sicheren Einhaltung von Grenzwerten, sowie die Optimierung und Kalibrierung des gesamten Antriebsstrangs.
Similar content being viewed by others
Literatur
Verwendete Literatur
Kleppmann, W.: Taschenbuch Versuchsplanung – Produkte und Prozesse optimieren, 6. Aufl. München (2009). ISBN 3446420339
Schmitt, D.: Emissionsminderung am Nutzfahrzeugdieselmotor durch optimierte Prozessführung und synthetische Kraftstoffe. (2016)
Sammer, G., Guntsching, T., Gerspach, U.: Das Prüffeld der Zukunft. ATZextra 18(2), 70–75 (2013)
Fortuna, T., Mayer, M., Pflügl, H., Gschweitl, K.: Optimierung von Verbrennungsmotoren mit DoE und CAMEO. HDT – 2. Tagung DoE in der Motorenentwicklung. Berlin (2003)
ISO/BIPM-Leitfaden „Guide to the Expression of Uncertainty in Measurement“. 8., überarbeitete Aufl. Genf, 2008
Kluin, M., Maschmeyer, H., Jenkins, S., Beidl, C.: Simulations- und Testmethoden für Hybridfahrzeuge mit vorausschauendem Energiemanagement. 5. Internationales Symposium für Entwicklungsmethodik. (2013)
Gohl, M.: Massenspektrometrisches Verfahren zur dynamischen Online-Messung der Ölemission von Verbrennungsmotoren, Dissertation. Technische Universität, Hamburg-Harburg (2003)
Kammerstetter, H., Werner, M.: Vorbedatung von Steuergeräten am Komponentenprüfstand unter Einbezug kompletter Diesel-/Otto-Einspritzsysteme. Messtechnik und Simulation in der Motorentwicklung. Expert-Verlag, Essen (2004)
Winklhofer, E., Beidl, C., Hirsch, A., Piock, W.: Flammendiagnostik für die Leistungs- und Emissionsentwicklung. MTZ 65(5), 362–369 (2004)
Bier, M., Buch, D., Kluin, M., Beidl, C.: Entwicklung und Optimierung von Hybridantrieben am X-in-the-Loop-Motorenprüfstand. MTZ 73, 3 (2012)
Buch, D., Maschmeyer, H., Beidl, C., Hochmann, G.: Ganzheitlicher Frontloading-Ansatz im Entwicklungsprozess am Prüfstand mit virtuellem Fahrzeug. 6. Grazer Symposium Virtuelles Fahrzeug. (2013)
Denger, D., et al.: Effizientere Konzeptevaluierung und Kalibration von Fahrzeugflotten am Motorenprüfstand. 14. VDI-Fachtagung – Erprobung und Simulation in der Fahrzeugtechnik, Juni 2009. (2009)
Schyr, C.: AVL-Indizier-TechDay. Darmstadt, Oct. 2008. (2008)
Münz, M., Feiling, A., Beidl, C.: Indizierung am Einzylindermotor mit alternativem Kraftstoff OME (Oxymethylenether). AVL-Indizier-TechDay, Sep. 2015. Darmstadt (2015)
Kudlaty, K., Kock, K., Krenn, H.: A Novel Ultrasonic Intake Air Flow Meter for Test Bed Applications. SAE Technical Paper 2013-26-0118. (2013)
Ebner, H.W., Köck, K.: Coriolis Fuel Meter – A Modern and Reliable Approach to Continuous and Accurate Fuel Consumption Measurement. SAE2000 World Congress, Detroit, March 2000. (2000)
Köck, K., Lardet, R., Schantl, R.: Aktuelle Anforderungen an die Kraftstoffverbrauchmessung. MTZ 72, 9 (2011)
Graf, F., Hofmann, P., Köck, K., List, R.: Höhere Prüfstandseffizienz durch moderne Kraftstoffverbrauchs-Messtechnik. MTZ 65, 7–8 (2004)
Ebner, H.W., Jaschek, A.O.: Die Blow-By-Messung – Anforderungen und Messprinzip. MTZ 59, (1998)
Schmitt, A., et al.: Methodik und Sensorik zur Applikation von Harnstoff-SCR-Systemen am dynamischen Motorprüfstand. VDI – Fachkonferenz: NOx-Control, Nürnberg, Jul. 2009. (2009)
Wiesinger, M.: Entwicklung eines Abgas-Massenflusssensors, Dissertation. Technische Universität, Wien (1999)
Lohde, S.: Direkte Abgasdurchflußmessung mittels Ultraschalllaufzeitverfahren, Dissertation. Naturwissenschaftliche Universität, Lübeck (2001)
Yassine, M.K.: Parameters Affecting Direct Vehicle Exhaust Flow Measurement. Society of Automotive Engineers, SAE Paper 2003-01-0781 (2003)
AVL Testing Equipment Broschüre, 2016
Gätke, J.: Akustische Strömungs und Durchflussmessung. Akademie Verlag, Berlin (1991)
Beck, M., Hinterhofer, K.: Direct dynamic Flow Measurement in the Exhaust of Combustion Engines. Society of Automotive Engineers, SAE Paper 980880, S. 95–104 (1998)
Hardy, J.E., McKnight, T.E., Hylton, J.O., Joy, R.D.: Real Time Exhaust Gas Flow Measurement System. Society of Automotive Engineers, SAE Paper 982105 (1998)
Klingenberg, H.: Automobil-Messtechnik. Band C: Abgasmesstechnik. Springer, Berlin, Heidelberg, New York (1995)
Engeljehringer, K.: Abgasmesssystem für die Entwicklung schadstoffarmer Dieselmotoren. MTZ 07-08, (2006)
Heavy duty engines – Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions. International Standard ISO 16183
Regulation (EC) No 595/2009 of the European Parliament and of the Council, 2009
Directive 2005/78/EC of the European Parliament and of the Council
Code of Federal Regulations (CFR) Title 40 Part 1065 – Engine Testing Procedures
Silvis, W. M.; Marek, G.; Kreft, N.; Schindler, W.: Diesel particulate measurement with partial flow sampling systems: A new probe and tunnel design that correlates with full flow tunnels. SAE Technical Paper Series No. 2002-01-0054
Steigerwald, K.: Weiterentwicklung eines Teilstromverdünnungssystems für die Partikelmessung am instationär betriebenen Dieselmotor, Dissertation. Technische Universität, Darmstadt (2008)
Directive 1991/542/EC of the European Parlament and of the Counsil, 1991
Directive 1999/96/EC of the European Parlament and of the Counsil, 1999
Directive 2001/1/EC of the European Parlament and of the Council, 2001
CFR Vol 79, No 81 Parts 79, 80, 85, 86, 600, 1036, 1037, 1039, 1042, 1048, 1054, 1065, 1066 – Control of Air Pollution From Motor Vehicles: Tier 3 Motor Vehicle Emission and Fuel Standards
CFR Vol 66, No 12, Part 86, § 86007-11, 2001
Weiterführende Literatur
Weidinger, C.R.: Messgüte am Prüfstand für die Motorenentwicklung, Dissertation. Technische Universität, Wien (2002)
Werner, M.: Kraftstoffverbrauchsmessung: Kürzere Entwicklungszeiten durch kontinuierliche Messtechnik. MTZ 99, 11(1997)
Reciprocating internal combustion engines – Exhaust emission measurement – Part 1: Test bed measurement of gaseous and particulate exhaust emissions. International Standard ISO 8178-1: 2006
Graf Schweinle, G.: A.: Interaktion von Testverfahren und Fahrzyklen bei PKW Abgasmessungen. 3. Internationales Forum Abgas- und Partikelemission, Sinsheim, Sept. 2004. (2004)
Vouitsis, E., Ntziarchristos, L., Samaras, Z.: Particulate Matter Mass Measurements for low Emitting Diesel Powered Engines: What’s Next? Prog Energy Combust Sci 29, 635–672 (2003)
Khalek, I.A.: 2007 Diesel particulate measurement research, Final Report, Project E-66 Phase 1. Southwest Research Institute Report 03.10415, Mai 2005
Stein, H.J.: Weiterentwicklung der Partikelmessung für Nutzfahrzeugmotoren nach 2005 – ISO 16183 und US 2007. 2. Internationales Forum Abgas- und Partikelemission, Nürnberg, Sept. 2002. (2002)
Silvis, W.: Standardized dilution conditions for gravimetric PM sampling – measures to assure results that correlate. 5. Internationales Forum Abgas- und Partikelemission, Ludwigsburg, Feb. 2008. (2008)
Schindler, W., Nöst, M., Thaller, W., Luxbacher, Th.: Stationäre und transiente messtechnische Erfassung niedriger Rauchwerte. MTZ 62(10), 808 (2001)
Pongratz, H., Schindler, W., Singer, W., Striock, St., Thaller, W.: Messtechnik für transiente Erfassung der Dieselemissionen – Entwicklung, Messtechnik und Prüftechnik. MTZ 64(10), 824 (2003)
Beck, H.A., Niessner, R., Haisch, Ch.: Development and characterisation of a mobile photoacoustic sensor for online soot emission monitoring in diesel exhaust gas. Anal Bioanal Chem 375, 1136 (2003)
Haisch, C.: Simultaneous Detection of Gaseous and Particulate Exhaust Components by Photoacoustic Spectroscopy. 5. Internationales Forum Abgas- und Partikelemission, Ludwigsburg, Feb. 2008. (2008)
Schindler, W.; Haisch, Ch.; Beck, H. A.; Niessner, R.; Jacob, E; Rothe, D.: A photoacoustic sensor system for time-resolved quantification of diesel soot emissions. SAE Technical Paper Series No. 2004-01-0968
Schraml, S.; Heimgärtner, C.; Will, S.; Leipertz, A.; Hemm, A.: Applications of a new soot sensor for exhaust emission control based on time resolved laser induced incandescence. SAE Technical Paper Series No 2000-01-2864
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Fachmedien Wiesbaden
About this chapter
Cite this chapter
Beidl, C., Harms, KC., Weidinger, C.R. (2017). Motorenmesstechnik. In: van Basshuysen, R., Schäfer, F. (eds) Handbuch Verbrennungsmotor. ATZ/MTZ-Fachbuch. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-10902-8_28
Download citation
DOI: https://doi.org/10.1007/978-3-658-10902-8_28
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-10901-1
Online ISBN: 978-3-658-10902-8
eBook Packages: Computer Science and Engineering (German Language)