Abstract
Microstrip line with π matching circuits are very attractive because of high output power and good impedance matching which makes it an alternative over earlier matching circuit. This paper presents an RF energy harvester with microstrip line in series with tuned π-matching circuit that enables efficient power conversion at different RF input power under different load conditions. Matching circuit parameters were optimized for better efficiency. We have focused for specific input power range -15 to 10dBm for 3-stage, 5-stage and 7-stage of energy harvesting circuit. Optimum efficiency of approximately 80% is achieved at input power 0 to 10dBm for higher stages. Effect of load variation also shows that better efficiency is achieved for input power -10 to 10dBm for 3-stage, 5-stage and 7-stage of the harvesting circuit.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Wright, M.: Harvesters gather energy from the ether, power lightweight systems. EDN (December 2006), http://edn.com/article/CA6399099
Harrist, D.W.: Wireless battery charging system using radio frequency energy harvesting, M.S. thesis, Univ. Pittsburgh, Pittsburgh, PA (2004)
Nintanavongsa, P., Muncuk, U., Lewis, D.R., Chowdhury, K.R.: Design Optimization and Implementation for RF Energy Harvesting Circuits. IEEE Journal on Emerging and Selected Topics in Circuits and Systems 2(1), 24–33 (2012)
Arrawatia, M., et al.: RF Energy Harvesting System at 2.67 and 5.8GHz. In: APMC 2010 (December 2010)
Barnett, R., et al.: Design of multistage rectifiers with low-cost impedance matching for passive RFID tags. In: 2006 IEEE RFIC Symp. (June 2006)
Wilas, J., et al.: Power harvester design for semi-passive UHF RFID Tag using a tunable impedance transformation. In: 9th Int. Symp. on Comm. and Info. Tech., ISCIT 2009 (September 2009)
Mazzilli, F., et al.: Design methodology and comparison of rectifiers for UHF-band RFIDs. In: 2010 IEEE RFIC Symp. (May 2010)
Pozar, D.M.: Microwave Engineering, 3rd edn. Wiley
Yan, H., Montero, J.G.M., Akhnoukh, A., de Vreede, L.C.N., Burghart, J.N.: An integration scheme for RF power harvesting. Presented at the 8th Annu. Workshop Semiconductor Advances Future Electron. Sensors, Veldhoven, The Netherlands (2005)
Arrawatia, M., Diddi, V., Kochar, H., Baghini, M.S., Kumar, G.: An integrated CMOS RF energy harvester with di erential microstrip antenna and on-chip charger. In: Proceedings of the IEEE International Conference on VLSI Design, Sister Conferences of DAC, Hyderabad, India (2012)
Balanis, C.A.: Antenna Theory: Analysis and Design, 3rd edn. John Wiley & Sons, Hoboken (2005)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Agrawal, S., Pandey, S., Singh, J., Kondekar, P.N. (2013). An Efficient RF Energy Harvester with Tuned Matching Circuit. In: Gaur, M.S., Zwolinski, M., Laxmi, V., Boolchandani, D., Sing, V., Sing, A.D. (eds) VLSI Design and Test. Communications in Computer and Information Science, vol 382. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-42024-5_17
Download citation
DOI: https://doi.org/10.1007/978-3-642-42024-5_17
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-42023-8
Online ISBN: 978-3-642-42024-5
eBook Packages: Computer ScienceComputer Science (R0)