Abstract
In this paper, the realisation and testing of spatial coupling methods for aeroelastic simulations with partitioned algorithms is presented. The investigated methods for spatial coupling—the transfer of loads and deformations between the wetted surface and the structural model—are the method of Finite Interpolation Elements and two other, newly-implemented interpolation methods. All three are suitable for reduced structural models, and the geometries of the wetted surface and the structural model do not have to coincide. The aeroelastic simulation tool employed and the theoretical background of the spatial coupling schemes are outlined. Different measures for the quality of the spatial coupling are derived and applied to test cases of increasing complexity. The influence of user-defined coupling parameters on the deformation projection is assessed. Based on these results and on practical considerations, the available coupling methods are compared and conclusions are drawn regarding their applicability.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
- Computational Fluid Dynamics
- Root Mean Square
- Root Mean Square Deviation
- Projection Method
- Surface Point
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Ahrem, R., Beckert, A., Wendland, H.: A New Multivariate Interpolation Method for Large-Scale Spatial Coupling Problems in Aeroelasticity. In: Int. Forum Aeroel. Struct. Dyn. (IFASD) 2005, paper IF-073, Munich, Germany (2005)
Badcock, K.J., Rampurawala, A.M., Richards, B.E.: Intergrid Transformation for Aircraft Aeroelastic Simulation. In: 21st Appl. Aerodyn. Conf., AIAA paper 2003-3512, Orlando, USA (2003)
Ballmann, J. (ed.): Flow Modulation and Fluid-Structure Interaction at Airplane Wings—Research Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany. Springer (2003)
Ballmann, J., Boucke, A., Dickopp, C., Reimer, L.: Results of Dynamic Experiments in the HIRENASD Project and Analysis of Observed Unsteady Processes. In: Int. Forum Aeroel. Struct. Dyn. (IFASD) 2009, paper IFASD-2009-103, Seattle, USA (2009)
Beckert, A.: Coupling Fluid (CFD) and structural (FE) Models using Finite Interpolation Elements. Aerosp. Sci. Technol. 4, 13–22 (2000)
Beckert, A., Wendland, H.: Multivariate Interpolation for Fluid-Structure Interaction Problems using Radial Basis Functions. Aerosp. Sci. Technol. 5, 125–134 (2001)
Bendiksen, O.O.: Effect of Wing Deformations and Sweep on Transonic Limit Cycle Flutter of Flexible Wings. In: Int. Forum Aeroel. Struct. Dyn. (IFASD) 2007, paper IF-031, Stockholm, Sweden (2007)
Boucke, A.: Kopplungswerkzeuge für aeroelastische Simulationen. Doctoral thesis, RWTH Aachen University (2003)
Braun, C.: Ein modulares Verfahren für die numerische aeroelastische Analyse von Luftfahrzeugen. Doctoral thesis, RWTH Aachen University (2007)
Cebral, J.R., Löhner, R.: Conservative Load Projection and Tracking for Fluid-Structure Problems. AIAA J. 35(4) (1997)
Chen, P.C., Jadic, I.: Interfacing of Fluid and Structural Models via Innovative Structural Boundary Element Method. AIAA J. 36(2), 282–287 (1998)
Farhat, C., Lesoinne, M., LeTallec, P.: Load and Motion Transfer Algorithms for Fluid/ Structure Interaction Problems with Non-Matching Discrete Interfaces: Momentum and Energy Conservation, Optimal Discretization and Application to Aeroelasticity. Comput. Methods Appl. Mech. Eng. 157, 95–114 (1998)
Goura, G.S., Badcock, K.J., Woodgate, M.A., Richards, B.E.: Transformation Methods for the Time Marching Analysis of Flutter. In: 19th AIAA Appl. Aerodyn. Conf., AIAA paper 2001-2457, Anaheim, USA (2001)
Harder, R.L., Desmarais, R.N.: Interpolation Using Surface Splines. J. Aircr. 9, 189–191 (1972)
Heinrich, R., Kroll, N., Neumann, J., Nagel, B.: Fluid-Structure Coupling for Aerodynamic Analysis and Design — A DLR Perspective. In: 46th AIAA Aerosp. Sci. Meet. Exhib., paper AIAA 2008-561, Reno, USA (2008)
Hesse, M.: Entwicklung eines automatischen Gitterdeformationsalgorithmus zur Strömungsberechnung um komplexe Konfigurationen auf Hexaedernetzen. Doctoral thesis, RWTH Aachen University (2006)
Jaiman, R.K., Jiao, X., Geubelle, P.H., Loth, E.: Assessment of Conservative Load Transfer for Fluid-Solid Interface with Non-Matching Meshes. Int. J. Numer. Methods Eng. 55 (2004)
Kroll, N., Rossow, C.-C., Becker, K., Thiele, F.: The MEGAFLOW Project. Aerosp. Sci. Technol. 4(4), 223–237 (2000)
Kroll, N., Fassbender, J.K. (eds.): MEGAFLOW—Numerical Flow Simulation in Aircraft Design. Springer (2005)
Kroll, N. (ed.): MEGADESIGN and MegaOpt—German Initiatives for Aerodynamic Simulation and Optimization in Aircraft Design. Springer (2009)
Massjung, R.: Numerical Schemes and Well-Posedness in Nonlinear Aeroelasticity. Doctoral thesis, RWTH Aachen University (2002)
Park, K.C., Felippa, C.A., Ohayon, R.: Partitioned Formulation of Internal Fluid-Structure Interaction Problems via Localized Lagrange Multipliers. Comput. Methods Appl. Mech. Eng. 190, 2989–3007 (2001)
Quaranta, G., Masarati, P., Mantegazza, P.: A Conservative Mesh-Free Approach for Fluid-Structure Interface Problems. In: Int. Conf. Comp. Methods Coupled Probl. Sci. Eng., Barcelona, Spain (2005)
Reimer, L., Boucke, A., Ballmann, J., Behr, M.: Computational Analysis of High Reynolds Number Aero-Structural Dynamics (HIRENASD) Experiments. In: Int. Forum Aeroel. Struct. Dyn. (IFASD) 2009, paper IFASD-2009-130, Seattle, USA (2009)
Reimer, L., Braun, C., Wellmer, G., Behr, M., Ballmann, J.: Development of a Modular Method for Computational Aero-Structural Analysis of Aircraft. In: Schro ̈der, W. (ed.) Summary of Flow Modulation and Fluid-Structure Interaction Findings—Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany. Springer (1997-2008) (to be published)
van Rossum, G., Drake, F.L.: Using Python Release 3.1.1. Python Software Foundation (2009), http://www.python.org
Sadeghi, M., Liu, F., Lai, K.L., Tsai, H.M.: Application of Three-Dimensional Interfaces for Data Transfer in Aeroelastic Computations. In: 22nd Appl. Aerodyn. Conf. Exhib., AIAA paper 2004-5376, Providence, USA (2004)
Schröder, W. (Ed.): Summary of Flow Modulation and Fluid-Structure Interaction Findings — Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany. Springer (1997-2008) (to be published)
Unger, R., Haupt, M.C., Horst, P.: Coupling Techniques for Computational Nonlinear Transient Aeroelasticity. In: 25th Int. Congr. Aeronaut. Sc. (ICAS), paper ICAS 2006-10.2.3, Hamburg, Germany (2006)
Wendland, H.: Piecewise Polynomial, Positive Definite and Compactly Supported Radial Functions of Minimal Degree. Adv. Comput. Math. 4, 389–396 (1995)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Wellmer, G., Reimer, L., Flister, H., Behr, M., Ballmann, J. (2013). A Comparison of Fluid/Structure Coupling Methods for Reduced Structural Models. In: Eisfeld, B., Barnewitz, H., Fritz, W., Thiele, F. (eds) Management and Minimisation of Uncertainties and Errors in Numerical Aerodynamics. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol 122. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-36185-2_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-36185-2_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-36184-5
Online ISBN: 978-3-642-36185-2
eBook Packages: EngineeringEngineering (R0)