Abstract
One focus of the Priority Program 1180 is the prediction of process machine interactions. The investigated manufacturing processes as well as the machine tool behavior and the physical phenomena vary within the projects of this program. So depending on the issues that were investigated, the modeling approach that is best suitable for the specific problem has to be applied. To predict the interactions these models have to be coupled and simulated. Besides the modeling approaches different simulation techniques have also been applied. This chapter gives an overview of the applied models of the structural machine behavior and the manufacturing processes, the coupling of these models as well as the simulation techniques that were used.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Brecher, C., Esser, M., Witt, S.: Interaction of manufacturing process and machine tool. CIRP Annals – Manufacturing Technology 58, 588–607 (2009)
Klocke, F., Brecher, C., Sitte, B., Weiß, M.: Analyse der dynamischen Wechselwirkungen bei Pendel- und Schnellhubschleifprozessen. In: Jahrbuch Schleifen, Honen, Läppen und Polieren, vol. 64, Ausgabe, Essen (2010)
Hoffmann, F.: Optimierung der dynamischen Bahngenauigkeit von Werkzeugmaschinen mit der Mehrkörpersimulation. Dissertation, WZL of RWTH Aachen University (2008)
Oden, J.T., Lin, T.L.: On the general rolling contact problem for finite deformations of a viscoelastic cylinder. Computer Methods in Applied Mechanics and Engineering 57, 297–367 (1986)
Tlusty, J.: Analysis of the State of Research in Cutting Dynamics. Annals of the CIRP 27(2), 583–589 (1978)
Radharamanan, R.: The Measurement of the Dynamic Cutting Coefficients and the Analysis of Chatter Behaviour in Turning. Katholieke Universiteit Leuven, Dissertation (1977)
Altintas, Y., Weck, M.: Chatter Stability of Metal Cutting and Grinding. In: Annals of the CIRP, vol. 53(2), pp. 619–642 (2004)
Stephenson, D.A., Agapiou, J.S.: Metal Cutting. Theory and Practice. Marcel Dekker Inc., New York (1996)
Merchant, M.E.: Mechanics of the metal cutting process. Journal of Applied Physics 16, 318–325 (1945)
Fang, N., Jaeahir, I.S.: Analytical Predictions and Experimental Validation of Cutting Forces Ratio, Chip Thickness, and Chip Back-Flow Angle in Restricted Contact Machining Using the Universal Slip-Line Model. International Journal of Machine Tools and Manufacture 42, 681–694 (2000)
Clausen, M.: Zerspankraftprognose und -simulation für Dreh- und Fräsprozesse. Hannover. Diss (2005)
Tlusty, J., Ismail, F.: Basic Non-Linearity in Machining Chatter. Annals of the CIRP 30(1), 299–304 (1981)
Altintas, Y.: Modeling Approaches and Software for Predicting the Performance of Milling Operations at MAL-UBC. Machining Science and Technology 4(4), 445–478 (2000)
Weck, M., Brecher, C.: Werkzeugmaschinen. Automatisierung von Maschinen und Anlagen; 6. Auflage. Springer (2006)
Stépán, G., Insperger, T.: Stability of the Milling Process. Periodica Polytechnica Ser. Mech. Eng. 44 (2000)
Feng, H.-Y., Azeem, A., Wang, L.: Simplified and Efficient Calibration of a Mechanistic Cutting Force Model for Ball-End Milling. International Journal of Machine Tools and Manufacture 44, 214–268 (2004)
Witt, S.: Integrierte Simulation von Maschine, Werkstück und spanendem Fertigungsprozess. Dissertation. Aachen. RWTH Aachen, Werkzeugmaschinenlabor RWTH Aachen (2007)
Marsolek, J., Fleischer, J., Schmidt, C., Schermann, T.: Simulation von Zerspanungsprozessen mit Abaqus. Tagungsband ABAQUS Benutzerkonferenz, Nürnberg (2005)
Kim, J.S., Lee, B.H.: An Analytical Model of Dynamic Cutting Forces in Chatter Vibration. International Journal of Machine Tools and Manufacture 31(3), 371–381 (1991)
van Brussel, H.: Dynamische Analyse van het Verspaningsproces. Katholieke Universiteit Leuven, Dissertation (1971)
Werntze, G.: Dynamische Schnittkraftkoeffizienten. Bestimmung mit Hilfe des Digitalrechners und Berücksichtigung im mathematischen Modell zur Stabilitätsanalyse. RWTH Aachen, Dissertation (1973)
Brinksmeier, E., Aurich, J.C., Govekar, E., Heinzel, C., Hoffmeister, H.W., Peters, J., Rentsch, R., Stephenson, D.J., Uhlmann, E., Weinert, K., Wittmann, M.: Advances in Modeling and Simulation of Grinding Processes. Annals of the CIRP 55(2), 667–696 (2006)
Tönshoff, H.K., Peters, J., Inasaki, T., Paul, T.: Modelling and Simulation of Grinding Processes. Annals of the CIRP 41(2), 677–688 (1992)
Aurich, J.C., Biermann, D., Blum, H., Brecher, C., Carstensen, C., Denkena, B., Klocke, F., Kröger, M., Steinmann, P., Weinert, K.: Modelling and simulation of process: machine interaction in grinding. Production Engineering 3(1), 111–120
Mackerle, J.: Finite Element Analysis and Simulation of Machining: an Addendum. A Bibliography (1996-2002). International Journal of Machine Tools & Manufacture 43, 103–114 (2003)
Hou, Z.B., Komanduri, R.: On the Mechanics of the Grinding Process-Part 1. Stochastic Nature of the Grinding Process. International Journal of Machine Tools & Manufacture 43, 1579–1593 (2003)
Zitt, U.-R.: Modellierung und Simulation von Hochleistungsschleifprozessen. University of Kaiserslautern, Dissertation (1999)
Chang, H.-C., Junz Wang, J.-J.: A stochastic grinding force model considering random grit distribution. International Journal of Machine Tools and Manufacture 48, 1335–1344 (2008)
Doman, D.A., Warkentin, A., Bauer, R.: Finite element modeling approaches in grinding. International Journal of Machine Tools and Manufacture 49(2), 109–116
Werner, K., Klocke, F., Brinksmeier, E.: Modelling and Simulation of Grinding Processes. In: 1st European Conference on Grinding. Aachen, pp. S.8-1 – S.8-27 (2003)
Denkena, B., Deichmueller, M., Kröger, M., Popp, K.M., Carstensen, C., Schroeder, A., Wiedemann, S.: Geometrical Analysis of the Complex Contact Area for Modeling the local Distribution of Process Forces in Tool Grinding. In: Proceedings of the 1st International Conference on Process Machine Interaction, pp. 289–298 (2008)
Voelkner, W.: Spannungs- Kraft- und Arbeitermittlung beim Umformen. Fertigungstechnik und Betrieb 25(12), 739–743 (1975)
Voelkner, W.: Ein Beitrag zur Streifen- und Gleitlinienmethode. Wissenschaftliche Zeitschrift der TU Dresden 25(3), 613–618 (1976)
Lange, K. (ed.): Handbook of Metal Forming. Society of Manufacturing Engineers, Dearborn, MI (1994)
Petzold, W., König, J., Eberlein, L. (eds.): Umform- und Zerteiltechnik. Lehrbrief Tiefziehen und Drücken, Dresden (1981)
Neugebauer, R. (ed.): Umform- und Zerteiltechnik. Verlag Wissenschaftliche Skripten, Chemnitz (2005)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Brecher, C. et al. (2013). Modeling and Simulation. In: Denkena, B., Hollmann, F. (eds) Process Machine Interactions. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-32448-2_2
Download citation
DOI: https://doi.org/10.1007/978-3-642-32448-2_2
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-32447-5
Online ISBN: 978-3-642-32448-2
eBook Packages: EngineeringEngineering (R0)