Abstract
Mechanical modelling is an abstraction, a formation of an idea or ideas that may involve the physics of solids with specific geometric configurations. Mathematical models may involve relationship between continuous functions of space and time for describing the homogeneity and/or isotropy of a material or the formation of conservation laws (Meyer, 1985; Tayler, 1986; Besseling and Liessen, 1994). The results based on these models for describing a phenomenon should agree with existing measurements within a specified accuracy and can be used with confidence to predict future observations and events.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Aboudi UJ (1989) Micromechanical analysis of composites by the method of cells. Appl. Mech. Rev., 42(7): 193–221.
Ashby MF, Evans AG, Fleck NA, Gibson LJ, Hutchinson JW and Wadley HNG (2000) Metal Foams: A Design Guide. Butterworth Heinemann: Oxford.
Becker R (2002) Developments and trends in continuum plasticity. Journal of Computer-Aided Materials Design, 9(2): 145–163.
Besseling JE and der Liessen E (1994) Mathematical Modeling of Inelastic Deformation. Chapman & Hall: London.
Bhattacharya K and Schlömerkemper A (2004) Transformation yield surface of shape memory alloys. J. Phys. IV France, 115: 155–2.
Bishop JFW and Hill R (1951) A theory of the plastic distortion of a polycrystalline aggregate under combined stresses. Philos Mag, 42: 414–27.
Bishop JFW and Hill R (1951) A theoretical derivation of the plastic properties of a polycrystalline face centered metal. Philos Mag, 42: 1298–307.
Bomert M, Herve E, Stolz C, Zaoui A (1994) Self-consistent approaches and strain heterogeneities in two-phase elastoplastic materials. Appl. Mech. Review, 47(1): Part 2, 66–76.
Bouvet C, Calloch S and Lexcellent C (2002) Mechanical behavior of a Cu-Al-Be shape memory alloy under multiaxial proportional and nonproportional loadings. J. Eng. Mater. Technol, 124(2): 112–124.
Bouvet C, Calloch S and Lexcellent C (2004) A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and non-proportional loadings. Eur J. of Mech A Solids, 23: 37–61.
Buyukozturk O, Nilson AH and State FO (1970) Stress-strain response and fracture of a concrete model in biaxial loading. Journal ACI, 68(8): 590–595.
de Buhan P and de Pelice G (1997) A homogenization approach to the ultimate strength of brick masonry. 3∼Mechanics and Physics of Solids, 45 (7): 1085–1104.
Caballero A, Carol I and Lopez CM (2007) A 3D meso-mechanical analysis of concrete specimens under biaxial loading. Fatigue and Fracture of Engineering Materials and Structures,30(9): 877–886.
Chen SH and Wang ZQ (2009) Micro-scale plasticity mechanics. University of Science and Technology of China Press: Hefei, China.
Christeensen RM and Lo KH (1979) Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, 27: 315–330.
Deshpande VS and Fleck NA (2000) Isotropic constitutive models for metallic foams. J. Mech. Phys. Solids, 48: 1253–283.
Dongare AM, Rajendran AM, Lamattina B, Brenner DW, Zikry MA (2010) Atomic-scale study of plastic-yield criterion in nanocrystalline CU at high strain rates. Metallurgical and Materials Transactions A, 41A(2): 523–31.
Dvorak GJ, Bahei-E1-Din (1997) An inelastic composite materials: Transformation analysis and experiments. In: Continuum Micromechanics, P. Suquet (ed.), Springer: Wien.
Dvorak GJ (1999) Composite materials: inelastic behavior, damage, fatigue and fracture. In: Research Trends in Solid Mechanics, G.J. Dvorak (ed.). Pergamon: New York.
Faria SH, Hutter K, Kirchner N and Wang Y (2010) Continuum Description of Granular Materials. Springer: Berlin.
Fish J and Yu Q (2001) Multiscale damage modeling for composite materials: theory and computational framework. Int. J. for Numerical Methods in Engineering, 52: 161–192.
Gall K, Sehitoglu H, Maier HI and Jacobus K (1998) Stress-induced Martensitic Phase Transformations in Polycrystalline CuZnAl Shape Memory Alloys under Different Stress States, Met Mat Trans A., 29A: 765–73.
Ghosh S. and Moorthy S (1995) Elastic-plastic analysis of arbitrary heterogeneous materials with the Voronoi cell finite element method. Comp. Meth. Appl. Mech. Eng., 121: 373–09.
Ghosh S., Lee K. and Moorthy S (1995) Multiple scale analysis of heterogeneous elastic structures using homogenization theory and Voronoi cell finite element method. Int. J. Solids Struct., 321: 27–2.
Ghosh S, Lee K and Moorthy S (1996) Two scale analysis of heterogeneous elastic-plastic materials with asymptotic homogenization and Voronoi cell finite element model. Comp. Meth. Appl. Mech. Engrg., 132: 63–16.
Ghosh S, Lee K and Raghavan P (2001) A multilevel computational model for multi-scale damage analysis in composite and porous materials. Inter. J. of Solids and Structures,38: 2335–385.
Gibeau E, Laydi MR and Lexcellent C (2010) Determination and transport of phase transformation yield surfaces for shape memory alloys. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM), 90(7): 595–695.
Gibson LJ, Ashby MF, Zhang J and Triantafillou TC (1989) Failure surface for cellular mateerials under multiaxial loads-(1) modelling. Int. J. Mech. Sci., 31: 635–63.
Gibson LJ and Ashby MF (1987, 1997) Cellular Solids: Structure and Propertities. Press Syndicate of the University of Cambridge: London.
Gibson LJ (2000) Mechanical behavior of metallic foams. Annu. Rev. Mater. Sci., 30: 191–27.
Gioux G, McCormark TM and Gibson LJ (2000) Failure of aluminum foams under multiaxial loads. Int. J. Mech. Sci. 42: 1097–117.
Gologanu M et al. (1993) Approximate models for ductile metals containing non-spherical voids-case of asisymmetric prolate ellipsoidal cavities, J. of the Mechanics and Physics of Solids, 41: 1723–1754.
Gologanu M, Leblond JB, Perrin G, Devaux J (1997) Recent extensions of Gurson’s Model for porous ductile metals. In: Continuum Micromechanics, P. Suquet (ed.) Springer: Wien, pp 61–130,.
Groger R, Racherla V, Bassani JL and Vitek V (2008) Multiscale modeling of plastic deformation of b molybdenum and tungsten: II. Yield Criterion for single crystals based on atomistic studies of glide of 1/2(11) Screw dislocations. Acta Materialia, 56: 5412–5425
Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth, I. Yield criteria and flow rules for porous ductile media. J. Eng. Mater. Tech., 99: 2–15.
Hashin Z (1962) The elastic moduli of heterogeneous materials, J. Applied Mech., 29: 143–150.
Hashin Z and Shtrikman S (1964) A variational approach to the theory of the elastic behavlour of multiphase materials, Mech. Phys. Sci., 11(2): 127–41.
Hashin Z (1983) Analysis of composite materials—A survey. J. Appl. Mech., 50: 481–05.
Hayakawa K and Murakami S (1998) Space damage conjugate force and damage potential of elastic-plastic damage materials. In: Damage Mechanics in Engineering Materials. Edited by Voyiadjis GZ, Ju J-WW and Chaboche J-L, Elsevier.
Haythornthwaite RM (1961) Range of yield condition in ideal plasticity. J. Engrg. Mech., 87: 117–33.
Hill R (1965) Continuum micro-mechanics of elastoplastic polycrystals. J. Mech. Phys. Solids, 13: 89–101.
Hodge PG (1959) Plastic Analysis of Structures. McGraw-Hill: New York.
Huang W (1999) “Yield” surfaces of shape memory alloys and their applications. Acta Materialia, 47(9): 2769–2776.
Jasiuk I and Ostoja-Strarzewski M eds (1994) Micromechanics of Random Media I. Applied Mechanics Reviews, 47(1): Part 2:Special Supplement.
Jasiuk I and Ostoja-Strarzewski M eds (1998) Micromechanics of Random Media II. Int. J. Solids and Structures, 35(19): 2383–2569.
Ju J and Tseng K (1996) Effective elastoplastic behavior of two-phase ductile matrix composites: a micromechanical framework. Int. J. Solids Struct., 3329: 4267–291.
Kachanov LM (1986) Introduction to Continum Damage Mechanics. Martinus Nijhoff Publishers: Netherlands.
Kolupaev VA and Altenbach H (2010) Einige Überlegungen zur Unified Strength Theory von Mao-Hong Yu (Considerations on the Unified Strength Theory due to Mao-Hong Yu), Forschung im Ingenieurwesen (Forsch Ingenieurwes) Springer-Link 29 May 2010 (in German, English Abstract).
Kraska M, Doig M, Tikhomirov D, Raabe D and Roters F (2009) Virtual material testing for stamping simulations based on polycrystal plasticity. Comput Mater Sci, 46: 383–92.
Kröner E (1961) On the plastic deformation of polycrystals. Acta Metall, 9: 155–61.
Kröner E (1977) Bounds for effective elastic moduli of disordered materials, Mech. Phys Sci, 25(2): 137–55.
Ladevdz EC and Fish J (2003) Preface to special issue on multiscale computational mechanics for materials and structure. Computer Methods in Applied Mechanics and Engineering, 192: 28–0.
Lemaitre J (1992) A Course on Damage Mechanics. Springer-Verlag.
Lexcellent C, Vivet A, Bouvet C, Calloch S and Blanc P (2002) Experimental and numerical determinations of the initial surface of phase transformation under biaxial loading in some polycrystalline shape-memory alloys. J Mech Phys Solids, 50: 2717–735.
Lexcellent C and Blanc P (2004) Phase transformation yield surface determination for some shape memory alloys. Acta Mater 52: 2317–324.
Lexcellent C and Schlömerkemper A (2007) Comparison of several models for the determination of the phase transformation yield surface in shape memory alloys with experimental data. Acta Materialia, 55: 2995–3006.
Li YM and Ishii K (1998a) The evaluation of the elasto-plastic behavior of composite materials under biaxial stress with homogenization method. In: Proc. of the Conference on Computational Engineering and Science, 3: 1023–026.
Li YM and Ishii K (1998b) The evaluation of strength for the composite materials. In: Strength Theory: Applications, Developments and Prospects for the 21st Century. Yu MH and Fan SC eds. Science Press: New York, Beijing, 337–42.
Li YY, Zheng JL, Cui JZ and Long SY (2010) Iterative multi-scale finite element predicting method for the elasticity mechanical parameters of the concrete with multi-graded rocks. Chinese Journal of Computational Mechanics, 27(1): 115–119 (in Chinese).
Li ZX, Sun ZH, Guo L et al. (2007) Multi-objective concurrent approaching of simulating for civil infrastructure. J. of Southeast University (Natural Science Edn.), 37(02):251–260 (in Chinese).
Lim TJ and McDowell DL (1999) Mechanical behavior of Ni-Ti shape memory alloys under axial-torsional proportional and nonproportional loading. J Eng Mat and Techn, 121: 9–8.
Lin TH and Ito YM (1965) Theoretical plastic distortion of a polycrystalline aggregate under combined and revered stress. J. Mech. Phys. Solids.,13:103–15.
Lin TH and Ito YM (1966) Theoretical plastic stress-strain relationship of a polycrystal and comparisions with Mises and Tresca plasticity theories. Int. J. Engng. Sci., 4: 543–61.
Liu D and Jiang CZ (2008) Plastic limit analysis of circular plates based on twin-shear unified strength theory. Engineering Mechanics, 25(8): 77–84 (in Chinese).
Liu TCY, Nilson AH and Slate FO (1972) Biaxial stress-strain relation for concrete, Proc. ASCE, Journal of Structural Division, 98(5): 1025–1034.
Liu TCY, Nilson AH and Slate FO (1972) Stress-strain response and fracture of concrete in uniaxial and biaxial compression. Journal ACI, 69(5): 191–195.
Liu WK, Qian D and Horstemeyer ME (2004) Preface to special issue on multiple scale methods for nanoscale mechanics and materials. Computer Methods in Applied Mechanics and Engineering, 193: l7–20
Lou ZW (1991) Foundation of Damage Mechanics. Xi’an Jiaotong University Press: Xi’an (in Chinese).
Lu XZ, Lin XC, Ye LP (2008) Multiscale finite element modeling and its application in structural analysis. Journal of Huazhong University of Science and Technology (Urban Science Edition), 25(4): 76–80 (in Chinese).
Lund AC and Schuh CA (2005) Strength asymmetry in nanocrystalline metals under multiaxial loading. Acta Material, 53: 3173–3205.
Ma HF, Chen HQ, Li BK (2004) Progress in concrete meso-mechanics research and comment on. Chinese Journal of Water Resources and Hydropower Research, 2004(2).
Ma HF, Chen HQ, Wu JP, Li BK (2008) Study on numerical algorithm of 3D meso-mechanics model of dam concrete. Chinese J. of Computational Mechanics, 25(2): 244–247.
McDowell DL (1985) An experimental study of the structure of constitutive equations for nonproportional cyclic plasticity, ASME Journal of Engineering Materials and Technology, 107: 307–315.
McDowell DL, Stock SR, Stahl D and Antolovich SD (1988) Biaxial path dependence of deformation substructure of type 304 stainless steel, Metallurgical Transactions, 19: A 1277–1293.
McDowell DL, Marin E, and Bertoncelli C (1993) A combined kinematicisotropic hardening theory for porous inelasticity of ductile metals, Int. J. of Damage Mechanics, 2: 137–161.
McDowell DL(1999) Non-associative aspects of multiscale evolutionary phenomena. In: Picu, R.C., Krempl, E. (Eds.), Proceedings 4th International Conference on Constitutive Laws for Engineering Materials, pp 54–57.
McDowell DL(2001) Materials design: a useful research focus for inelastic behavior of structural metals. In: Sih GC, Panin VE (Eds.), Special Issue of the Theoretical and Applied Fracture Mechanics, Prospects of Mesomechanics in the 21st Century: Current Thinking on Multiscale Mechanics Problems, vol. 37, pp 245–259.
McDowell DL(2007) Simulation-assisted materials design for the concurrent design of materials and products, JOM., 59 (9): 21–25.
McDowell DL and Olson GB (2008) Concurrent design of hierarchical materials and structures, Scientific Modeling and Simulation (CMNS), 15(1): 207.
McDowell DL, Choi H-J, Panchal J, Austin R, Allen JK and Mistree F (2007) Plasticity-related microstructure—property relations for materials design, Key Engineering Materials, 340–341: 21–30.
McDowell DL (2010) A perspective on trends in multiscale plasticity. Khan International Medal Lecture, Int. J. of Plasticity.
Meyer WJ (1985) Concepts of Mathematical Modeling. McGraw-Hill, Singapore.
Murakami S, Hayakawa K and Liu Y (1998) Damage evolution and damage surface of elastic-plastic-damage materials under multiaxial loading. Int. Journal of Damage Mechanics, 7(2):103–128.
Novák V and Šittner P (2004) Micromechanics modelling of NiTi polycrystalline aggregates transforming under tension and compression stress. Mat Sci Eng A, 378: 490–498.
Ortiz M (2008) Multiscale modeling of materials: Linking microstructure and macroscopic behavior. Invited Lecture, Seminarios Interuniversitarios de Mecanica y Materiales, Barcelona, Zaragoza, Seville, Spain.
Ortiz M (2008) Nonconvex Plasticity and Microstructure. Rodney Hill Prize Plenary Lecture, 22nd International Congress of Theoretical and Applied Mechanics, Adelaide, Australia.
Ostoja-Strarzewski M (1993) Micromechanics as a basis of random elastic continuum approximations. Probablistic Engineering Mechanics, 8(2): 107–114.
Ostoja-Strarzewski M (1994) Micromechanics as a basis of continuum random fields. Applied Mechanics Reviews (Special Issue: Micromechanics of Random Media), 47(1) Part 2: S221–230.
Ostoja-Strarzewski M (1994) Random field models of heterogeneous matrials. Int. J. Solids and Structures, 35(19): 2429–2455..
Ottosen NS and Ristinmaa M (2005) The Mechanics of Constitutive Modeling. Elsevier.
Picu RC (2003) Foreword to special issue on linking discrete and continuum models. Int. Multiscale Computational Engng, 1(1): vii–viii.
Pindera M-J and Aboudi J (1989) Micromechanical investigation of the convexity of yield surfaces of metal matrix composites. In: Advances in Plasticity A.S. Khan and M. Tokuda (eds.), pp 129–132.
Raabe D (1998) Computational Materials Science: The Simulation of Materials Microstructures and Properties. Wiley-VCH Verlag: London.
Roters F. Eisenlohr P, Hantcherli L, Tjahjanto DD, Bieler TR and Raabe D (2010) Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications. Acta Materialia, 58(4): 1152–1211.
Sadowski T(2005) Multiscale Modelling of Damage and Fracture Processes in Composite Materials. Springer: Berlin.
Save MA and Massonnet CE (1972) Plastic Analysis and Design of Plates, Shells and Disks. North-Holland: Amsterdam.
Sawczuk A (1989) Mechanics and Plasticity of Structures. Ellis Horwood: Chichester.
Schrefler BA (2009) Multiscale Modelling. In: Zienkiewicz OC and Taylor RL (2009) The Finite Element Method for Solid and Structural Mechanics. Sixth edn. Elsevier, Amsterdam and Elsevier (Singapore) Pte Ltd, pp 547–589.
Schuh CA and Lund AC (2003) Atomic basis for the plastic yield criterion of metallic glass. Nature Materials, 2: 499–452.
Sih GC ed (2000) Role of Mechanics for Development of Science and Technology. Proceedings of an Int. Conf. of Role of Mechanics for Development of Science and Technology, held at Xi’an Jiaotong University, China, June Tsinghua University press: Xi’an.
Sridhar I and Fleck NA (2000) Yield behaviour of cold compacted composite powders. Acta Materials, 48(13): 3341–3352.
Stronge WJ and Yu TX (1993) Dynamic Models for Structural Plasticity. Springer: Berlin.
Sun CT and Vaidya RS (1996) Prediction of composite properties from a representative volume element. Composites Science and Technology, 56(2): 171–179.
Tayler AB (1986) Mathematical Models in Applied Mechanics. Clarendon Press: Oxford.
Tailard K, Blanc P, Calloch and Lexcellent (2006) Phase transformation yiels surface of anisotropic shape memory allys. Materials Science and Engineering, A 438–440: 436–440.
Theocaris PS (1991) The elliptic paraboloid failure criterion for cellular solids and brittle foams. Acta Mechanica, 89: 93–121.
Triantafillou TC, Zhang J et al (1989) Failure surface for cellular Mateerials under multiaxial loads-(2) Comparison of models with experment. Int. J. Mech. Sci., 31(9): 665–678
Triantafillou TC and Gibson LJ (1990) Multiaxial failure criteria for brittle foams. Int. J. Mech. Sci., 32(6): 479–496.
Voyiadjis GZ, Ju JW and Chaboche JL eds (1998) Damage Mechanics in Engineering Materials, Elsevier.
Wu BJ, Li ZX and Tang KK (2007) Multi-scale modeling and damage analyses of large civil structure: multi-scale mechanics from material to structure. Advances in Mechanics, 37(3): 321–336.
Yu MH (1961a) General behaviour of isotropic yield function. Res. Report of Xi’an Jiaotong University. Xi’an, China (in Chinese).
Yu MH (1961b) Plastic potential and flow rules associated singular yield criterion. Res. Report of Xi’an Jiaotong University. Xi’an, China (in Chinese).
Yu MH (1983) Twin shear stress yield criterion. Int. J. of Mech. Science, 25(1): 71–74.
Yu MH et al. (1985) Twin shear theory and its generalization. Science in China, Series A,English edition,28 (11): 1174–1183.
Yu MH and He LN (1991) A new model and theory on yield and failure of materials under the complex stress state, Mechanical Behaviour of Materials-6, (ICM-6), Jono M and Inoue T (eds.), Pergamon Press: Oxford, 3: 841–846.
Yu MH and Zeng WB (1993a) Twin-shear plasticity and mesomechanics. In: Collection of Papers Dedicated to Professor Tung-Hua Lin in Celebration of His 80th Birthday (Wang ZQ, Xu BY and Huang ZP eds. Peking University Press: Beijing (in Chinese).
Yu MH and Zeng WB (1993b) Mesomechanical simulation of failure criterion for a composite material. Macro-Meso-micro Mechanical Properties of Materials.
Tokuda M and Xu BY eds. Mie Academic Press: Mie, Japan, pp 571–576.
Yu MH (2000) Material Model in Mesomechanics and Macromechanics. Plenary lecture. In: Mesomechanics 2000, Tsinghua University Press, pp 239–246.
Yu SW and Feng XQ (1997) Damage Mechanics. Tsinghua University Prtess: Beijing.
Zeng WB and Wei XY (1998) Computer simulation of failure criteria for concrete. Strength Theory: Applications, Developments and Prospects for the 21st Century. Yu MH and Fan SC eds. Science Press: New York, Beijing, pp 639–642.
Zhu H, Sankar BV and Marrey RV (1998) Evaluation of failure criteria for fiber composites using finite element micromechanics Journal of Composite Materials, 32(8): 766–782.
Zienkiewicz OC and Taylor RL (2009) The Finite Element Method for Solid and Structural Mechanics. Sixth edn. Elsevier: Amsterdam and Elsevier (Singapore) Pte Ltd.
Zohdi TI and Wridggers P (2001) Computational micro-macro material testing. Archives of Computational Methods in Engineering, 8(2): 131–228.
Zyczkowski M (1981) Combined Loadings in the Theory of Plasticity. Polish Scientific Publishers: PWN and Nijhoff.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2012 Zhejiang University Press, Hangzhou and Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Yu, MH., Li, JC. (2012). Mesomechanics and Multiscale Modelling for Yield Surface. In: Computational Plasticity. Advanced Topics in Science and Technology in China. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-24590-9_19
Download citation
DOI: https://doi.org/10.1007/978-3-642-24590-9_19
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-24589-3
Online ISBN: 978-3-642-24590-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)