Zusammenfassung
In Medizinprodukten werden hauptsächlich folgende keramischen Werkstoffe eingesetzt: Aluminiumoxid und Zirkonoxid sowie Calciumphosphate, bioaktive Gläser und Glaskeramiken. In der Medizin gibt es zudem breite Anwendungsgebiete für weitere nichtmetallisch-anorganische Werkstoffe. Beispiele hierfür sind Brillengläser oder Glasfasern für Endoskope. Am häufigsten werden keramische Werkstoffe in Medizinprodukten im Zusammenhang mit dem menschlichen Skelett, den Knochen, Gelenken und Zähnen eingesetzt (Tabelle 13.1). In der Dentalmedizin finden keramische Werkstoffe beispielsweise in Form von Porzellankronen, mit Glas gefüllten Zementen oder künstlichen Gebissen eine breite Anwendung [2]. Bei Hüftgelenk-Endoprothesen werden Aluminiumoxid sowie Zirkonoxid für Hüftkugeln und Calciumphosphate in Form von Hydroxylapatit als Beschichtung auf Prothesenschäften eingesetzt.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
Literatur
Hench L.L., Wilson J., An introduction to bioceramics, 1–24, World Scientific Publishing Co. Pte. Ltd., Singapore, 1993.
Hench L.L., Bioceramics: from concept to clinic, Journal of the American Ceramic Society, 74, 7, 1991, p. 1487–1510.
Kohn D.H., Materials for bone and joint replacement, in Materials science and technology, a comprehensive treatment, 14 -Medical and dental materials, Williams D.F. (ed.), VCH Verlag, Weinheim, 1992, p. 31–109.
Willmann G., 20 Jahre Aluminiumoxidkeramik für die Medizintechnik, Biomedizinische Technik, 39, 4, 1994, p. 73–78.
Hulbert S.F., The use of alumina and zirconia in surgical implants, in An introduction to bioceramics, Hench L.L., Wilson J. (eds.), World Scientific Publishing Co. Pte. Ltd., Singapore, 1993, p. 25–40.
Oonishi H., Ishimaru H., Yamamoto M., Tsuji E., Kushitani S., Aono M., Nabeshima T., Comparison of bone ingrowth into porous Ti-6Al-4V beads with/without a plasma spray HA, CRC Handbook of Bioactive Ceramics, 2, 1990, p. 155–162.
Boutin P., T.H.R. using alumina-alumina sliding and a metallic stem: 1330 cases and an 11-year follow-up, in Orthopaedic ceramic implants, 1, Oonishi H., Ooi Y. (eds.), 1981.
Dörre E., Problems concerning the industrial production of alumina ceramic components for hip joint prosthesis, in Bioceramics and the human body, Ravaglioli A., Krajewski A. (eds.), Elsevier, London, 1991, p. 454–460.
Rieger W., Biocompatibility studies on zirconia and alumina in orthopaedic joint applications, The Monte Verità Conference 1993 on Biocompatible Materials Systems, Ascona, Switzerland, 1993.
Cales B., Stefani Y., Lilley E., Long-term in vivo and in vitro aging of zirconia ceramic used in orthopaedy, Journal of Biomedical Materials Research, 28, 5, 1994, p. 619–624.
Stevens R., Zirconia and zirconia ceramics, 2nd Edition, Magnesium Elektron Ltd., 1986.
Ravaglioli A., Krajewki A., Bioceramics – Materials, properties, applications, Chapman & Hall, London, 1992.
Kay J.F., Bioactive surface coatings for hard tissue biomaterials, CRC Handbook of Bioactive Ceramics, 2, 1990, p. 111–122.
Spiro T.G., Calcium in biology, John Wiley & Sons, New York, 1983.
de Groot K., Klein C.P.A.T., Wolke J.G.C., de Blieck-Hogervorst J.M.A., Chemistry of calcium phosphate bioceramics, CRC Handbook of bioactive ceramics, 2, 1990, p. 3–16.
Nancollas G.H., In vitro study of calcium phosphate crystallization, in Biomineralization – Chemical and biochemical perspectives, Mann S., Webb J., Williams J.p. (eds.), VCH-Verlagsgesellschaft, Weinheim, 1989, p. 157–180.
Maxian S.H., Zawadsky J.P., Dunn M.G., In vitro evaluation of amorphous calcium phosphate and poorly crystallized HA coatings on titanium implants, Journal of Biomedical Materials Research, 27, 1993, p. 111–117.
Geesink G.T., Hydroxyapatite-coated total hip prosthesis – Two year clinical and roentgenographic results of 100 cases, Clinical Orthopaedics and Related Research, 261, 1990, p. 39–58.
Wolke J.G.C., Klein C.P.A.T., de Groot V., Plasma-sprayed hydroxyapatite coatings for biomedical applications, 3rd National Thermal Spray Conference, Long Beach, CA, USA, 1990, p. 413–417.
Shirkhanzadeh M., Azadegan M., Stack V., Schreyer S., Fabrication of pure hydroxyapatite and fluoridated-hydroxyapatite coating by electrocrystallisation, Materials Letter, 18, 1994, p. 211–214.
van Blitterswijk C.A., Bakker D., Leenders H., Brink J.v.d., Hesseling S.C., Bovell Y., Radder A.M., Sakkers R.J., Gaillard M., Heinze P.H.,Beumer G.J., Interfacial reactions leading to bone-bonding with PEO/PBT copolymers (Polyactive), in Bone-bonding biomaterials, Ducheyne P., Kokubo T., van Blitterswijk C.A. (eds.), Reed Healthcare Communications, Leiderdorp, The Netherlands, 1992, p. 13–30.
Gruner H., Plasmaspritzschichten für die Brennstoffzellentechnik, DSV-Berichte, 130, 1989, p. 194–196.
Lugscheider E., Jokiel P., Plasmaspritzen – Verfahren, Anwendungen, Entwicklungen, in Beschichten und Verbinden in Pulvermetallurgie und Keramik, VDI Verlag GmbH, Hagen, 1992, p. 7–32.
Wang B.C., Lee T.M., Chang E., Yang C.Y., The shear strength and the failure mode of plasma-sprayed HA coating to bone: The effect of coating thickness, Journal of Biomedical Materials Research, 27, 1993, p. 1315–1327.
Dörre E., HA-Keramik-Beschichtungen für Verankerungsteile von Hüftgelenkprothesen (Techn. Aspekte), Biomedizinische Technik, 34, 3, 1989, p. 46–52.
Hulbert S.F., Young F.A., Mathews R.S., Klawitter J.J., Talbert C.D., Stelling F.H., Potential of ceramic materials as permanently implantable skeletal prostheses, Journal of Biomedical Materials Research, 4, 1970, p. 433–456.
Harris D.H., Overview of problems surrounding the plasma spraying of HA coatings, Third National Thermal Spray Conference, Long Beach, CA, USA, 1990, p. 419–423.
Osborn J.F., Die biologische Leistung der HA-Keramik-Beschichtung auf dem Femurschaft einer Ti-Prothese, Boimedizinische Technik, 32, 7–8, 1987, p. 177–183.
de Groot K., Klein C.P.A.T., Wolke J.G.C., de Blieck-Hogervorst J.M.A., Plasma-sprayed coatings of calcium phosphate, in CRC Handbook of Bioactive Ceramics, 2, Yamamuro T., Hench L.L., Wilson J. (eds.), CRC Press, Boca Raton, Ann Arbor, Boston, 1990, p. 133–142.
Niki M., Ito G., Matsuda T., Ogino M., Comparatived push-out data of bioactive and non-bioactive materials of similar rugosity, in The bone-biomaterial interface, Davies J.M. (ed.), University of Toronto Press, Toronto, 1990, p. 350–356.
van Blitterswijk C.A., Grote J.J., Kuypers W., Daems W.T., de Groot K., Macropore tissue ingrowth: A quantititavie and qualitative study on hydroxylapatite ceramic, Biomaterials, 7, 1986, p. 137 ff.
Zyman Z., et al., Amorphous phase and morphological structure of hydroxyapatite plasma coatings, Biomaterials, 14, 3, 1993, p. 225–228.
Galgut P.N., Waite I.M., Tinkler S.M.B., Histological investigation of the tissue response to hydroxyapatite used as an implant material in periodontal treatment, Clinical Materials, 6, 1990, p. 105–121.
Ellinger R.F., Nery E.B., Lynch K.L., Histological assessment of periodontal osseous defects following implantation of hydroxyapatite and biphasic calcium phosphate ceramics. A case report, Int. J. Perio. Restor. Dent., 3, 1986, p. 223–233.
Jarcho M., Bolen C.H., Hydroxylapatite synthesis and characterization in dense polycrystalline form, Journal of Materials Science, 11, 1976, p. 2027–2035.
Daculsi G., LeGeros R.Z., Heughebaert M., Barbieux I., Formation of carbonate-apatite crystals after implantation of calcium phosphate ceramics, Calcified Tissue International, 46, 1990, p. 20–27.
Oonishi H., Tsuji E., Ishimaru H., Yamamotot M., Delecrin J., Clinical significance of chemical bondes between bioactive ceramics and bone in orthopaedic surgery, in Bioceramics, 2, Heimke G. (ed.), German ceramic society, Köln, 1990, p. 286–293.
de Groot K., Ceramics of calcium phosphates: Preparation and properties, in Bioceramics of calcium phosphate, de Groot K. (ed.), CRC Press, Boca Raton, USA, 1983, p. 100–114.
Hench L.L., Andersson Ö., Bioactive glasses, in An introduction to bioceramics, Hench L.L., Wilson J. (eds.), World Scientific Publishing Co. Pte. Ltd., Singapore, 1993, p. 41–62.
Wilson J., Douek E., Rust K., Bioglass middle ear devices: Ten year clinical results, in Bioceramics 8, Wilson J., Hench L.L., Greenspan D. (eds.), Elsevier Science Ltd., Florida, USA, 1995, p. 239–245.
Wilson J., Yli-Urpo A., Happonen R.-P., Bioactive glasses: Clinical applications, in An introduction to bioceramics, Hench L.L., Wilson J. (eds.), World Scientific Publishing Co. Pte. Ltd., Singapore, 1993, p. 63–73.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Ha, SW., Wintermantel, E. (2009). Biokompatible Keramische Werkstoffe. In: Wintermantel, E., Ha, SW. (eds) Medizintechnik. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-93936-8_13
Download citation
DOI: https://doi.org/10.1007/978-3-540-93936-8_13
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-93935-1
Online ISBN: 978-3-540-93936-8
eBook Packages: Computer Science and Engineering (German Language)