Abstract
For long term applications at high temperatures, the Ti-6Al-4V alloy is limited to about 400°C. For higher temperatures, titanium alloys (such as Ti-6242 and IMI 834) have been formulated according to the following general principles.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Saal S., Wagner L., Lütjering G., Pillhöfer H., Daeubler M. A.: Z. Metallkde. 81, (1990) p. 535
Schauerte O., Gysler A., Lütjering G., Mailly S., Chabanne Y., Sarrazin-Baudoux C., Mendez J., Petit J.: Fatigue Behavior of Titanium Alloys, TMS, Warrendale, USA, (1999) p. 191
Petit J., Sarrazin-Baudoux C., Chabanne Y., Lütjering G., Gysler A., Schauerte O.: Fatigue Behavior of Titanium Alloys, TMS, Warrendale, USA, (1999) p. 203
Lütjering S., Smith P. R., Eylon D.: Intermetallics and Superalloys, Euromat Vol. 10, Wiley-VCH, Weinheim, Germany, (2000) p. 283
Daeubler M. A., Helm D., Neal D. F.: Titanium 1990, Products and Applications, TDA, Dayton, USA, (1990) p. 78
Gysler A., Lütjering G.: DFVLR-FB 79-24, (1979)
Daeubler M. A., Helm D.: Titanium ’92, Science and Technology, TMS, Warrendale, USA, (1993) p. 41
Neal D. F.: Titanium, Science and Technology, DGM, Oberursel, Germany, (1985) p. 2419
Neal D. F.: Titanium ’95, Science and Technology, The University Press, Cambridge, UK, (1996) p. 2195
Sinha V., Mills M. J., Williams J. C.: Lightweight Alloys for Aerospace Application, TMS, Warrendale, USA, (2001) p. 194
Thompson A. W., Odegard B. C.: Met. Trans. 4, (1973) p. 899
Odegard B. C., Thompson A. W.: Met. Trans. 5, (1974) p. 1207
Hasija V., Ghosh S., Mills M. J., Joseph D. S.: Acta Met. 51, (2003) p. 4549
Deka D., Joseph D. S., Ghosh S., Mills M. J.: Met. Trans. 37 A, (2006) p. 1371
Thirumalai N.: PhD Thesis, The Ohio State University, USA, (2000) p. 297
Sinha V., Spowart J. G., Mills M. J., Williams J. C.: Met. Trans. 37A, (2006) p. 1501
Ankem S., Seagle S. R.: Titanium, Science and Technology, DGM, Oberursel, Germany, (1985) p. 2411
Thiehsen K. E., Kassner M. E., Pollard J., Hiatt D. R., Bristow B. M.: Met. Trans. 24A, (1993) p. 1819
Hayes R. W., Viswanathan G. B., Mills M. J.: Acta Met. 50, (2002) p. 4953
Viswanathan G. B., Karthikeyan S., Hayes R. W., Mills M. J.: Acta Met. 50, (2002) p. 4965
Köppers M., Herzig C., Freisel M., Mishia Y.: Acta Met. 45, (1997) p. 4181
Hood G. M.: J. Nucl. Mater. 135, (1985) p. 292
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
(2007). High Temperature Alloys. In: Titanium. Engineering Materials, Processes. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-73036-1_6
Download citation
DOI: https://doi.org/10.1007/978-3-540-73036-1_6
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-71397-5
Online ISBN: 978-3-540-73036-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)